Hi Laurent, On Tue, Jan 3, 2012 at 7:17 PM, Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > Hi James, > > On Tuesday 03 January 2012 10:40:10 James wrote: >> Hi Laurent, >> >> Happy New Year!! > > Thank you. Happy New Year to you as well. May 2012 bring you a workable OMAP3 > ISP solution ;-) > Yeah! that's on #1 of my 2012 wishlist!! (^^) But, it start off with a disappointment on the quest to get "gst-launch v4l2src" to work.. http://patches.openembedded.org/patch/8895/ Saw reported success in get v4l2src to work with MT9V032 by applying the hack but no luck with my Y12 monochrome sensor. (-.-)" >> I saw that there is a simple viewfinder in your repo for OMAP3 and >> wish to know more about it. >> >> http://git.ideasonboard.org/?p=omap3-isp-live.git;a=summary >> >> I intend to test it with my 12-bit (Y12) monochrome camera sensor >> driver, running on top of Gumstix's (Steve v3.0) kernel. >> >> Is it workable at the moment? > > The application is usable but supports raw Bayer sensors only at the moment. > It requires a frame buffer and an omap_vout device (both should be located > automatically) and configures the OMAP3 ISP pipeline automatically to produce > the display resolution. > Will there be a need to patch for Y12 support or workable out-of-the-box? Likely your previous notes, I know that 12-bit Y12 to the screen is an overkill but will it be able to capture Y12 from CCDC output and then output to the screen? Y12 sensor-> CCDC -> CCDC output -> screen I've one board connected to a LCD monitor via a DVI chip using GS's Tobi board as reference and another via 4.3" LG LCD Touchscreen using GS's Chestnut board as reference. Many thanks in adv -- Regards, James -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
