Hi,
On 12/30/2011 07:42 PM, 'Sakari Ailus' wrote:
Hi Hans,
On Fri, Dec 30, 2011 at 09:41:57AM +0100, Hans de Goede wrote:
...
Right, so the above is exactly why I ended up making the pwc whitebalance
control the way it is, the user can essentially choice between a number
of options:
1) auto whitebal
2) a number of preset whitebal values (seems your proposal has some more then the pwc
driver, which is fine)
3) manual whitebal, at which point the user may set whitebal through one of:
a) a color temperature control
b) red and blue balance controls
c) red, green and blue gains
d) red, green, blue and... another green. This is how some raw bayer sensors
can be controlled.
Yes, but have you ever tried setting the 2 green gains to different values?
(Hint the result is not pretty) I strongly believe the 2 separate green gains are
only there as it is easier to do things that way (it keeps the sensor array symmetric) and
there is no value in controlling them separately.
Notice that we also need to add some standardized controls for the 3c case, but that
is a different discussion.
I was planning to add the gain to low-level controls once the other sensor
controls have been properly discussed, and hopefully approved, first.
Seeing how this discussion has evolved I believe that what I did in the pwc driver
is actually right from the user pov, the user gets one simple menu control which
allows the user to choice between auto / preset 1 - x / manual and since as
described above choosing one of the options excludes the other options from being
active I believe having this all in one control is the right thing to do.
I still think automatic white balance should be separate from the rest, as
it currently is (V4L2_CID_AUTO_WHITE_BALANCE). If such presets aren't
available, the way the user would enable automatic white balance changes,
which is bad.
Well we can just put in the spec that the control can be either a boolean or
a menu control depending on if it has presets. I really believe that we should
not make this 2 separate controls, it does not match from a user pov.
There are 2 things which the user wants to control here:
1) How the value of the white balance controls gets controlled, which is
one of: a) auto b) select values from preset 1 - # c) manaul
2) The white balance controls themselves (temperature, or color balances ...),
but only if 1) is set to manual
There is no reason to separate 1) in 2 separate controls, that will only serve
to confuse the user.
As for the theoretical automatic wb which takes some hints like the presets,
AFAIK no such device exists and it is unlikely one will show up in the near
future. IOW it is purely theoretical and thus not interesting.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
