Re: [PATCH v4] v4l: Add driver for Micron MT9M032 camera sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Martin,

Thanks for the patch.

On Saturday 17 December 2011 11:10:55 Martin Hostettler wrote:
> The MT9M032 is a parallel 1.6MP sensor from Micron controlled through I2C.
> 
> The driver creates a V4L2 subdevice. It currently supports cropping, gain,
> exposure and v/h flipping controls in monochrome mode with an
> external pixel clock.

There are still several small issues with this driver. Things like not using 
the module_i2c_driver() macro, some indentation, magic values in registers 
(I'm trying to get more documentation), PLL setup (although that can be fixed 
later, it's not a requirement for the driver to be mainlined), ...

Would you be fine if I took the patch in my tree, fixed the remaining issues 
and pushed it to mainline for v3.4 (the time frame is too short for v3.3) ? 
Authorship will of course be preserved. The alternative would be to go through 
review/modification cycles, and I don't want to waste too much of your time 
:-)

-- 
Best regards,

Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux