The DRX-K doesn't change the delivery system at set_properties,
but do it at frontend init. This causes problems on programs like
w_scan that, by default, opens both frontends.
Instead, explicitly set the format when set_parameters callback is
called.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
---
drivers/media/dvb/frontends/drxk_hard.c | 32 ++++++++++++++++++++++--------
drivers/media/dvb/frontends/drxk_hard.h | 2 +
2 files changed, 25 insertions(+), 9 deletions(-)
diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c
index 95cbc98..c8e0921 100644
--- a/drivers/media/dvb/frontends/drxk_hard.c
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -1847,6 +1847,7 @@ static int SetOperationMode(struct drxk_state *state,
*/
switch (oMode) {
case OM_DVBT:
+ dprintk(1, ": DVB-T\n");
state->m_OperationMode = oMode;
status = SetDVBTStandard(state, oMode);
if (status < 0)
@@ -1854,6 +1855,8 @@ static int SetOperationMode(struct drxk_state *state,
break;
case OM_QAM_ITU_A: /* fallthrough */
case OM_QAM_ITU_C:
+ dprintk(1, ": DVB-C Annex %c\n",
+ (state->m_OperationMode == OM_QAM_ITU_A) ? 'A' : 'C');
state->m_OperationMode = oMode;
status = SetQAMStandard(state, oMode);
if (status < 0)
@@ -6183,7 +6186,10 @@ static int drxk_c_init(struct dvb_frontend *fe)
dprintk(1, "\n");
if (mutex_trylock(&state->ctlock) == 0)
return -EBUSY;
- SetOperationMode(state, OM_QAM_ITU_A);
+ if (state->m_itut_annex_c)
+ SetOperationMode(state, OM_QAM_ITU_C);
+ else
+ SetOperationMode(state, OM_QAM_ITU_A);
return 0;
}
@@ -6219,14 +6225,6 @@ static int drxk_set_parameters(struct dvb_frontend *fe,
return -EINVAL;
}
- if (state->m_OperationMode == OM_QAM_ITU_A ||
- state->m_OperationMode == OM_QAM_ITU_C) {
- if (fe->dtv_property_cache.rolloff == ROLLOFF_13)
- state->m_OperationMode = OM_QAM_ITU_C;
- else
- state->m_OperationMode = OM_QAM_ITU_A;
- }
-
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (fe->ops.tuner_ops.set_params)
@@ -6235,6 +6233,22 @@ static int drxk_set_parameters(struct dvb_frontend *fe,
fe->ops.i2c_gate_ctrl(fe, 0);
state->param = *p;
fe->ops.tuner_ops.get_if_frequency(fe, &IF);
+
+ /*
+ * Make sure that the frontend is on the right state
+ */
+
+ if (fe->ops.info.type == FE_QAM) {
+ if (fe->dtv_property_cache.rolloff == ROLLOFF_13) {
+ state->m_itut_annex_c = true;
+ SetOperationMode(state, OM_QAM_ITU_C);
+ } else {
+ state->m_itut_annex_c = false;
+ SetOperationMode(state, OM_QAM_ITU_A);
+ }
+ } else
+ SetOperationMode(state, OM_DVBT);
+
Start(state, 0, IF);
/* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */
diff --git a/drivers/media/dvb/frontends/drxk_hard.h b/drivers/media/dvb/frontends/drxk_hard.h
index a05c32e..85a423f 100644
--- a/drivers/media/dvb/frontends/drxk_hard.h
+++ b/drivers/media/dvb/frontends/drxk_hard.h
@@ -263,6 +263,8 @@ struct drxk_state {
u8 m_TSDataStrength;
u8 m_TSClockkStrength;
+ bool m_itut_annex_c; /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */
+
enum DRXMPEGStrWidth_t m_widthSTR; /**< MPEG start width */
u32 m_mpegTsStaticBitrate; /**< Maximum bitrate in b/s in case
static clockrate is selected */
--
1.7.8
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
