Am 05.12.2011 19:21, schrieb Mauro Carvalho Chehab:
On 05-12-2011 13:38, Thierry Reding wrote:
* Mauro Carvalho Chehab wrote:
On 05-12-2011 05:21, Thierry Reding wrote:
* linuxtv@xxxxxxxxxxxxxxx wrote:
From: Stefan Ringel<linuxtv@xxxxxxxxxxxxxxx>
Signed-off-by: Stefan Ringel<linuxtv@xxxxxxxxxxxxxxx>
Your commit message needs more details. Why do you think this is a
bugfix?
Also this commit seems to effectively revert (and then partially
reimplement)
a patch that I posted some months ago.
Thierry,
I noticed this. I tested tm6000 with those changes with both the
first gen
tm5600 devices I have and HVR900H and I didn't notice any bad thing
with this
approach, and changing from one standard to another is now faster.
So, I decided to apply it (with the remaining patches I've made to
fix audio for PAL/M and NTSC/M).
I also noticed that TM6000_QUIRK_NO_USB_DELAY is not needed anymore
(still, Stefan's patches didn't remove it completely).
Could you please test if the problems you've solved with your approach
are still occurring?
Unfortunately I don't have any hardware available anymore. I will see
if I
can get my hands on some of the devices, but that may take a while. I
guess
you'll just have to apply without me testing them first.
Ok.
My comments should be addressed anyway, though.
Sure.
Stefan,
Could you better explain a little more about this change?
After add Thierry's patch the interrupt endpoint don't send data anymore.
I tested different ways to bring the interrupt endpoint in working.
First in the function tm6000_uninit_isoc() -> nothing, but if I remove
the function tm6000_reset(), then works.
The next what I tested are directly in the function tm6000_reset(), but
it froze in.
Now I am adding this lines in function tm600_relese() in position it
call tm6000() (after videobuf_mmap_free() and it froze in, but before
videobuf_mmap_free() it don't froze in and I have now data over the
interrupt endpoint, and IR works.
better now?
Stefan
Also, if this is not required anymore, please send us a patch removing
the
TM6000_QUIRK_NO_USB_DELAY quirk.
In a few days, if I have tested my next patch (signal detection)
Regards,
Mauro.
Thierry
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
