Re: cx231xx kernel oops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Yan Seiner wrote:
Andy Walls wrote:
On Sun, 2011-12-04 at 18:01 -0800, Yan Seiner wrote:
I am experiencing a kernel oops when trying to use a Hauppage USB Live 2 frame grabber. The oops is below.

The system is a SOC 260Mhz Broadcom BCM47XX access point running OpenWRT.

root@anchor:/# uname -a
Linux anchor 3.0.3 #13 Sun Dec 4 08:04:41 PST 2011 mips GNU/Linux

The OOPS could be due to the limited hardware or something else. I'd appreciate any suggestions for making this work. I was hoping with hardware compression I could make it work on this platform. I am currently using a Hauppage USB Live (saa7115 based) with no problems but with limited resolution.

cx231xx v4l2 driver loaded.
cx231xx #0: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:c200) with 5 interfaces
cx231xx #0: registering interface 1
cx231xx #0: can't change interface 3 alt no. to 3: Max. Pkt size = 0
cx231xx #0: can't change interface 4 alt no. to 1: Max. Pkt size = 0
cx231xx #0: Identified as Hauppauge USB Live 2 (card=9)
cx231xx #0: cx231xx_dif_set_standard: setStandard to ffffffff
cx231xx #0: Changing the i2c master port to 3
cx231xx #0: cx25840 subdev registration failure
             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The cx231xx driver requires the cx25840 module.  I'll wager you didn't
install it on your router.


I made sure the module was loaded; same thing.  :-(

Module Size Used by Tainted: G cx231xx 124608 0
cx2341x                13552  1 cx231xx
cx25840                35568  2
rc_core                12640  1 cx231xx
videobuf_vmalloc        3168  1 cx231xx
videobuf_core          12384  2 cx231xx,videobuf_vmalloc

I was not able to catch the first bit.

cx231xx #1: can't change interface 4 alt no. to 1: Max. Pkt size = 0
cx231xx #1: can't change interface 4 alt no. to 1 (err=-22)
cx231xx #1: Identified as Hauppauge USB Live 2 (card=9)
cx231xx #1: cx231xx_dif_set_standard: setStandard to ffffffff
cx231xx #1: can't change interface 5 alt no. to 0 (err=-22)
cx231xx #1: Changing the i2c master port to 3
cx25840 3-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #1)
cx25840 3-0044:  Firmware download size changed to 16 bytes max length
cx25840 3-0044: unable to open firmware v4l-cx231xx-avcore-01.fw
????

Maybe I need that, eh?  :-)

--
Few people are capable of expressing with equanimity opinions which differ from the prejudices of their social environment. Most people are even incapable of forming such opinions.
   Albert Einstein

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux