On 10/29/2011 02:01 AM, James wrote:
I added a switch to femon so it displays signal and snr in dB.
The cx23885 driver for my Hauppauge WinTV-HVR1250 reports signal and snr
in dB.
http://lockie.ca/test/femon.patch.bz2
from patch:
human readable output: (signal: 0-65335, snr: 1/256 increments)\n"
human readable output: (signal and snr in .1 dB increments)\n"
You should take look to demod drivers and check what those are
returning. I have strong feeling that most drivers returns SNR as 10xdB.
And SS as 0-0xffff. I think there is good consensus of SNR unit, but for
SS it is not so clear. For my drivers I have used SNR 10xdB and SS
0-0xffff. That's why, giving only those two alternatives is not
suitable. Maybe it is better to set own param for SNR and SS?
Devin did some research about SNR long time back:
http://www.devinheitmueller.com/snr.txt
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
