Re: [PATCH] Fix to qt1010 tuner frequency selection (media/dvb)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I think my problem frequency has also been at the later spot. It is possible there is something more complicated going on at 474 MHz - so based on your testing, it's best to apply just the latter change, at least for now.

Jyrki



+    else if (freq<   546000000) rd[15].val = 0xd6; /* 546 MHz */

+    else if (freq<   546000000) rd[15].val = 0xd6; /* 546 MHz */


20.10.2011 00:06, Carlos Corbacho kirjoitti:
Jyrki,

So after a bit more testing...

[...]

        /* 22 */
        if      (freq<   450000000) rd[15].val = 0xd0; /* 450 MHz
        */

-    else if (freq<   482000000) rd[15].val = 0xd1; /* 482 MHz */
+    else if (freq<   482000000) rd[15].val = 0xd2; /* 482 MHz */
This change isn't so good.

With this change, I can no longer tune to channel 21 (474 MHz). If I revert it
back to 0xd1, it's fine.

[...]

        else if (freq<   514000000) rd[15].val = 0xd4; /* 514 MHz
        */

-    else if (freq<   546000000) rd[15].val = 0xd7; /* 546 MHz */
+    else if (freq<   546000000) rd[15].val = 0xd6; /* 546 MHz */
+    else if (freq<   578000000) rd[15].val = 0xd8; /* 578 MHz */
(This change is still good though, as this does allow me to now tune to the
BBC channels in this range).

-Carlos

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux