Am 18.10.2011 15:33, schrieb Boris Todorov: > Hi > > I'm trying to run OMAP + TVP5151 in BT656 mode. > > I'm using omap3isp-omap3isp-yuv (git.linuxtv.org/pinchartl/media.git). > Plus the following patches: > > TVP5151: > https://github.com/ebutera/meta-igep/tree/testing-v2/recipes-kernel/linux/linux-3.0+3.1rc/tvp5150 > > The latest RFC patches for BT656 support: > > Enrico Butera (2): > omap3isp: ispvideo: export isp_video_mbus_to_pix > omap3isp: ispccdc: configure CCDC registers and add BT656 support > > Javier Martinez Canillas (1): > omap3isp: ccdc: Add interlaced field mode to platform data > > > I'm able to configure with media-ctl: > > media-ctl -v -r -l '"tvp5150 3-005c":0->"OMAP3 ISP CCDC":0[1], "OMAP3 > ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]' > media-ctl -v --set-format '"tvp5150 3-005c":0 [UYVY2X8 720x525]' > media-ctl -v --set-format '"OMAP3 ISP CCDC":0 [UYVY2X8 720x525]' > media-ctl -v --set-format '"OMAP3 ISP CCDC":1 [UYVY2X8 720x525]' > > But > ./yavta -f UYVY -s 720x525 -n 4 --capture=4 -F /dev/video4 > > sleeps after > ... > Buffer 1 mapped at address 0x4021d000. > length: 756000 offset: 1515520 > Buffer 2 mapped at address 0x402d6000. > length: 756000 offset: 2273280 > Buffer 3 mapped at address 0x4038f000. > > Anyone with the same issue??? This happens with every other v4l test app I used. I had the same issue. Make sure that you disable the xclk when you remove your sensor driver. isp->platform_cb.set_xclk(isp, 0, ISP_XCLK_A) Regards, Stefan -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
