Re: [PATCH] mfd: Combine MFD_SUPPORT and MFD_CORE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 29, 2011 at 12:41 PM, Luciano Coelho <coelho@xxxxxx> wrote:
> From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
>
> Combine MFD_SUPPORT (which only enabled the remainder of the MFD
> menu) and MFD_CORE.  This allows other drivers to select MFD_CORE
> without needing to also select MFD_SUPPORT, which fixes some
> kconfig unmet dependency warnings.  Modeled after I2C kconfig.
>
> [Forward-ported to 3.1-rc4.  This fixes a warning when some drivers,
> such as RADIO_WL1273, are selected, but MFD_SUPPORT is not. -- Luca]
>
> Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
> Reported-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
> Cc: Jean Delvare <khali@xxxxxxxxxxxx>
> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
> Signed-off-by: Luciano Coelho <coelho@xxxxxx>

okay by me.

g.

> ---
>
> I guess this should fix the problem.  I've simple forward-ported
> Randy's patch to the latest mainline kernel.  I don't know via which
> tree this should go in, though.
>
> NOTE: I have *not* tested this very thoroughly.  But at least
> omap2plus stuff seems to work okay with this change.  MFD_SUPPORT is
> also selected by a couple of "tile" platforms defconfigs, but I guess
> the Kconfig system should take care of it.
>
>  arch/arm/mach-omap2/Kconfig |    2 +-
>  drivers/gpio/Kconfig        |    3 +-
>  drivers/mfd/Kconfig         |   54 +++---------------------------------------
>  3 files changed, 6 insertions(+), 53 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 57b66d5..1046923 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -14,7 +14,7 @@ config ARCH_OMAP2PLUS_TYPICAL
>        select SERIAL_OMAP_CONSOLE
>        select I2C
>        select I2C_OMAP
> -       select MFD_SUPPORT
> +       select MFD_CORE
>        select MENELAUS if ARCH_OMAP2
>        select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
>        select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index d539efd..fbc5fd4 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -180,7 +180,7 @@ config GPIO_SCH
>
>  config GPIO_VX855
>        tristate "VIA VX855/VX875 GPIO"
> -       depends on MFD_SUPPORT && PCI
> +       depends on PCI
>        select MFD_CORE
>        select MFD_VX855
>        help
> @@ -417,7 +417,6 @@ config GPIO_TIMBERDALE
>  config GPIO_RDC321X
>        tristate "RDC R-321x GPIO support"
>        depends on PCI
> -       select MFD_SUPPORT
>        select MFD_CORE
>        select MFD_RDC321X
>        help
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 21574bd..1836cdf 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -2,10 +2,9 @@
>  # Multifunction miscellaneous devices
>  #
>
> -menuconfig MFD_SUPPORT
> -       bool "Multifunction device drivers"
> +menuconfig MFD_CORE
> +       tristate "Multifunction device drivers"
>        depends on HAS_IOMEM
> -       default y
>        help
>          Multifunction devices embed several functions (e.g. GPIOs,
>          touchscreens, keyboards, current regulators, power management chips,
> @@ -18,16 +17,11 @@ menuconfig MFD_SUPPORT
>
>          This option alone does not add any kernel code.
>
> -if MFD_SUPPORT
> -
> -config MFD_CORE
> -       tristate
> -       default n
> +if MFD_CORE
>
>  config MFD_88PM860X
>        bool "Support Marvell 88PM8606/88PM8607"
>        depends on I2C=y && GENERIC_HARDIRQS
> -       select MFD_CORE
>        help
>          This supports for Marvell 88PM8606/88PM8607 Power Management IC.
>          This includes the I2C driver and the core APIs _only_, you have to
> @@ -55,14 +49,12 @@ config MFD_SM501_GPIO
>  config MFD_ASIC3
>        bool "Support for Compaq ASIC3"
>        depends on GENERIC_HARDIRQS && GPIOLIB && ARM
> -       select MFD_CORE
>         ---help---
>          This driver supports the ASIC3 multifunction chip found on many
>          PDAs (mainly iPAQ and HTC based ones)
>
>  config MFD_DAVINCI_VOICECODEC
>        tristate
> -       select MFD_CORE
>
>  config MFD_DM355EVM_MSP
>        bool "DaVinci DM355 EVM microcontroller"
> @@ -75,7 +67,6 @@ config MFD_DM355EVM_MSP
>  config MFD_TI_SSP
>        tristate "TI Sequencer Serial Port support"
>        depends on ARCH_DAVINCI_TNETV107X
> -       select MFD_CORE
>        ---help---
>          Say Y here if you want support for the Sequencer Serial Port
>          in a Texas Instruments TNETV107X SoC.
> @@ -93,7 +84,6 @@ config HTC_EGPIO
>
>  config HTC_PASIC3
>        tristate "HTC PASIC3 LED/DS1WM chip support"
> -       select MFD_CORE
>        help
>          This core driver provides register access for the LED/DS1WM
>          chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
> @@ -124,7 +114,6 @@ config TPS6105X
>        tristate "TPS61050/61052 Boost Converters"
>        depends on I2C
>        select REGULATOR
> -       select MFD_CORE
>        select REGULATOR_FIXED_VOLTAGE
>        help
>          This option enables a driver for the TP61050/TPS61052
> @@ -147,7 +136,6 @@ config TPS65010
>
>  config TPS6507X
>        tristate "TPS6507x Power Management / Touch Screen chips"
> -       select MFD_CORE
>        depends on I2C
>        help
>          If you say yes here you get support for the TPS6507x series of
> @@ -160,7 +148,6 @@ config TPS6507X
>  config MFD_TPS6586X
>        bool "TPS6586x Power Management chips"
>        depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
> -       select MFD_CORE
>        help
>          If you say yes here you get support for the TPS6586X series of
>          Power Management chips.
> @@ -174,7 +161,6 @@ config MFD_TPS6586X
>  config MFD_TPS65910
>        bool "TPS65910 Power Management chip"
>        depends on I2C=y && GPIOLIB
> -       select MFD_CORE
>        select GPIO_TPS65910
>        help
>          if you say yes here you get support for the TPS65910 series of
> @@ -186,7 +172,6 @@ config MFD_TPS65912
>
>  config MFD_TPS65912_I2C
>        bool "TPS95612 Power Management chip with I2C"
> -       select MFD_CORE
>        select MFD_TPS65912
>        depends on I2C=y && GPIOLIB
>        help
> @@ -195,7 +180,6 @@ config MFD_TPS65912_I2C
>
>  config MFD_TPS65912_SPI
>        bool "TPS65912 Power Management chip with SPI"
> -       select MFD_CORE
>        select MFD_TPS65912
>        depends on SPI_MASTER && GPIOLIB
>        help
> @@ -252,7 +236,6 @@ config TWL4030_POWER
>  config MFD_TWL4030_AUDIO
>        bool
>        depends on TWL4030_CORE
> -       select MFD_CORE
>        default n
>
>  config TWL6030_PWM
> @@ -267,13 +250,11 @@ config TWL6030_PWM
>  config TWL6040_CORE
>        bool
>        depends on TWL4030_CORE && GENERIC_HARDIRQS
> -       select MFD_CORE
>        default n
>
>  config MFD_STMPE
>        bool "Support STMicroelectronics STMPE"
>        depends on I2C=y && GENERIC_HARDIRQS
> -       select MFD_CORE
>        help
>          Support for the STMPE family of I/O Expanders from
>          STMicroelectronics.
> @@ -296,7 +277,6 @@ config MFD_STMPE
>  config MFD_TC3589X
>        bool "Support Toshiba TC35892 and variants"
>        depends on I2C=y && GENERIC_HARDIRQS
> -       select MFD_CORE
>        help
>          Support for the Toshiba TC35892 and variants I/O Expander.
>
> @@ -311,7 +291,6 @@ config MFD_TMIO
>  config MFD_T7L66XB
>        bool "Support Toshiba T7L66XB"
>        depends on ARM && HAVE_CLK
> -       select MFD_CORE
>        select MFD_TMIO
>        help
>          Support for Toshiba Mobile IO Controller T7L66XB
> @@ -319,7 +298,6 @@ config MFD_T7L66XB
>  config MFD_TC6387XB
>        bool "Support Toshiba TC6387XB"
>        depends on ARM && HAVE_CLK
> -       select MFD_CORE
>        select MFD_TMIO
>        help
>          Support for Toshiba Mobile IO Controller TC6387XB
> @@ -327,7 +305,6 @@ config MFD_TC6387XB
>  config MFD_TC6393XB
>        bool "Support Toshiba TC6393XB"
>        depends on GPIOLIB && ARM
> -       select MFD_CORE
>        select MFD_TMIO
>        help
>          Support for Toshiba Mobile IO Controller TC6393XB
> @@ -356,7 +333,6 @@ config PMIC_ADP5520
>  config MFD_MAX8925
>        bool "Maxim Semiconductor MAX8925 PMIC Support"
>        depends on I2C=y && GENERIC_HARDIRQS
> -       select MFD_CORE
>        help
>          Say yes here to support for Maxim Semiconductor MAX8925. This is
>          a Power Management IC. This driver provies common support for
> @@ -366,7 +342,6 @@ config MFD_MAX8925
>  config MFD_MAX8997
>        bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
>        depends on I2C=y && GENERIC_HARDIRQS
> -       select MFD_CORE
>        help
>          Say yes here to support for Maxim Semiconductor MAX8998/8966.
>          This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
> @@ -378,7 +353,6 @@ config MFD_MAX8997
>  config MFD_MAX8998
>        bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
>        depends on I2C=y && GENERIC_HARDIRQS
> -       select MFD_CORE
>        help
>          Say yes here to support for Maxim Semiconductor MAX8998 and
>          National Semiconductor LP3974. This is a Power Management IC.
> @@ -388,7 +362,6 @@ config MFD_MAX8998
>
>  config MFD_WM8400
>        tristate "Support Wolfson Microelectronics WM8400"
> -       select MFD_CORE
>        depends on I2C
>        help
>          Support for the Wolfson Microelecronics WM8400 PMIC and audio
> @@ -402,7 +375,6 @@ config MFD_WM831X
>
>  config MFD_WM831X_I2C
>        bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
> -       select MFD_CORE
>        select MFD_WM831X
>        depends on I2C=y && GENERIC_HARDIRQS
>        help
> @@ -413,7 +385,6 @@ config MFD_WM831X_I2C
>
>  config MFD_WM831X_SPI
>        bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
> -       select MFD_CORE
>        select MFD_WM831X
>        depends on SPI_MASTER && GENERIC_HARDIRQS
>        help
> @@ -487,7 +458,6 @@ config MFD_WM8350_I2C
>
>  config MFD_WM8994
>        bool "Support Wolfson Microelectronics WM8994"
> -       select MFD_CORE
>        depends on I2C=y && GENERIC_HARDIRQS
>        help
>          The WM8994 is a highly integrated hi-fi CODEC designed for
> @@ -526,7 +496,6 @@ config MFD_MC13783
>  config MFD_MC13XXX
>        tristate "Support Freescale MC13783 and MC13892"
>        depends on SPI_MASTER
> -       select MFD_CORE
>        select MFD_MC13783
>        help
>          Support for the Freescale (Atlas) PMIC and audio CODECs
> @@ -548,7 +517,6 @@ config ABX500_CORE
>  config AB3100_CORE
>        bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
>        depends on I2C=y && ABX500_CORE
> -       select MFD_CORE
>        default y if ARCH_U300
>        help
>          Select this to enable the AB3100 Mixed Signal IC core
> @@ -579,7 +547,6 @@ config EZX_PCAP
>  config AB8500_CORE
>        bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
>        depends on GENERIC_HARDIRQS && ABX500_CORE
> -       select MFD_CORE
>        help
>          Select this option to enable access to AB8500 power management
>          chip. This connects to U8500 either on the SSP/SPI bus (deprecated
> @@ -614,7 +581,6 @@ config AB8500_GPADC
>
>  config AB3550_CORE
>         bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
> -       select MFD_CORE
>        depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
>        help
>          Select this to enable the AB3550 Mixed Signal IC core
> @@ -629,7 +595,6 @@ config AB3550_CORE
>  config MFD_DB8500_PRCMU
>        bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
>        depends on UX500_SOC_DB8500
> -       select MFD_CORE
>        help
>          Select this option to enable support for the DB8500 Power Reset
>          and Control Management Unit. This is basically an autonomous
> @@ -639,7 +604,6 @@ config MFD_DB8500_PRCMU
>  config MFD_DB5500_PRCMU
>        bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
>        depends on UX500_SOC_DB5500
> -       select MFD_CORE
>        help
>          Select this option to enable support for the DB5500 Power Reset
>          and Control Management Unit. This is basically an autonomous
> @@ -648,7 +612,6 @@ config MFD_DB5500_PRCMU
>
>  config MFD_CS5535
>        tristate "Support for CS5535 and CS5536 southbridge core functions"
> -       select MFD_CORE
>        depends on PCI && X86
>        ---help---
>          This is the core driver for CS5535/CS5536 MFD functions.  This is
> @@ -656,7 +619,6 @@ config MFD_CS5535
>
>  config MFD_TIMBERDALE
>        tristate "Support for the Timberdale FPGA"
> -       select MFD_CORE
>        depends on PCI && GPIOLIB
>        ---help---
>        This is the core driver for the timberdale FPGA. This device is a
> @@ -668,14 +630,12 @@ config MFD_TIMBERDALE
>  config LPC_SCH
>        tristate "Intel SCH LPC"
>        depends on PCI
> -       select MFD_CORE
>        help
>          LPC bridge function of the Intel SCH provides support for
>          System Management Bus and General Purpose I/O.
>
>  config MFD_RDC321X
>        tristate "Support for RDC-R321x southbridge"
> -       select MFD_CORE
>        depends on PCI
>        help
>          Say yes here if you want to have support for the RDC R-321x SoC
> @@ -684,7 +644,6 @@ config MFD_RDC321X
>
>  config MFD_JANZ_CMODIO
>        tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
> -       select MFD_CORE
>        depends on PCI
>        help
>          This is the core driver for the Janz CMOD-IO PCI MODULbus
> @@ -694,7 +653,6 @@ config MFD_JANZ_CMODIO
>
>  config MFD_JZ4740_ADC
>        bool "Support for the JZ4740 SoC ADC core"
> -       select MFD_CORE
>        select GENERIC_IRQ_CHIP
>        depends on MACH_JZ4740
>        help
> @@ -704,7 +662,6 @@ config MFD_JZ4740_ADC
>  config MFD_VX855
>        tristate "Support for VIA VX855/VX875 integrated south bridge"
>        depends on PCI
> -       select MFD_CORE
>        help
>          Say yes here to enable support for various functions of the
>          VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
> @@ -713,7 +670,6 @@ config MFD_VX855
>  config MFD_WL1273_CORE
>        tristate "Support for TI WL1273 FM radio."
>        depends on I2C
> -       select MFD_CORE
>        default n
>        help
>          This is the core driver for the TI WL1273 FM radio. This MFD
> @@ -735,7 +691,6 @@ config MFD_PM8XXX
>  config MFD_PM8921_CORE
>        tristate "Qualcomm PM8921 PMIC chip"
>        depends on MSM_SSBI
> -       select MFD_CORE
>        select MFD_PM8XXX
>        help
>          If you say yes to this option, support will be included for the
> @@ -762,7 +717,6 @@ config TPS65911_COMPARATOR
>
>  config MFD_AAT2870_CORE
>        bool "Support for the AnalogicTech AAT2870"
> -       select MFD_CORE
>        depends on I2C=y && GPIOLIB
>        help
>          If you say yes here you get support for the AAT2870.
> @@ -770,7 +724,7 @@ config MFD_AAT2870_CORE
>          additional drivers must be enabled in order to use the
>          functionality of the device.
>
> -endif # MFD_SUPPORT
> +endif # MFD_CORE
>
>  menu "Multimedia Capabilities Port drivers"
>        depends on ARCH_SA1100
> --
> 1.7.1
>
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux