From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
Combine MFD_SUPPORT (which only enabled the remainder of the MFD
menu) and MFD_CORE. This allows other drivers to select MFD_CORE
without needing to also select MFD_SUPPORT, which fixes some
kconfig unmet dependency warnings. Modeled after I2C kconfig.
[Forward-ported to 3.1-rc4. This fixes a warning when some drivers,
such as RADIO_WL1273, are selected, but MFD_SUPPORT is not. -- Luca]
Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
Reported-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Cc: Jean Delvare <khali@xxxxxxxxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Signed-off-by: Luciano Coelho <coelho@xxxxxx>
---
I guess this should fix the problem. I've simple forward-ported
Randy's patch to the latest mainline kernel. I don't know via which
tree this should go in, though.
NOTE: I have *not* tested this very thoroughly. But at least
omap2plus stuff seems to work okay with this change. MFD_SUPPORT is
also selected by a couple of "tile" platforms defconfigs, but I guess
the Kconfig system should take care of it.
arch/arm/mach-omap2/Kconfig | 2 +-
drivers/gpio/Kconfig | 3 +-
drivers/mfd/Kconfig | 54 +++---------------------------------------
3 files changed, 6 insertions(+), 53 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 57b66d5..1046923 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -14,7 +14,7 @@ config ARCH_OMAP2PLUS_TYPICAL
select SERIAL_OMAP_CONSOLE
select I2C
select I2C_OMAP
- select MFD_SUPPORT
+ select MFD_CORE
select MENELAUS if ARCH_OMAP2
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d539efd..fbc5fd4 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -180,7 +180,7 @@ config GPIO_SCH
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
- depends on MFD_SUPPORT && PCI
+ depends on PCI
select MFD_CORE
select MFD_VX855
help
@@ -417,7 +417,6 @@ config GPIO_TIMBERDALE
config GPIO_RDC321X
tristate "RDC R-321x GPIO support"
depends on PCI
- select MFD_SUPPORT
select MFD_CORE
select MFD_RDC321X
help
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 21574bd..1836cdf 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2,10 +2,9 @@
# Multifunction miscellaneous devices
#
-menuconfig MFD_SUPPORT
- bool "Multifunction device drivers"
+menuconfig MFD_CORE
+ tristate "Multifunction device drivers"
depends on HAS_IOMEM
- default y
help
Multifunction devices embed several functions (e.g. GPIOs,
touchscreens, keyboards, current regulators, power management chips,
@@ -18,16 +17,11 @@ menuconfig MFD_SUPPORT
This option alone does not add any kernel code.
-if MFD_SUPPORT
-
-config MFD_CORE
- tristate
- default n
+if MFD_CORE
config MFD_88PM860X
bool "Support Marvell 88PM8606/88PM8607"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
This supports for Marvell 88PM8606/88PM8607 Power Management IC.
This includes the I2C driver and the core APIs _only_, you have to
@@ -55,14 +49,12 @@ config MFD_SM501_GPIO
config MFD_ASIC3
bool "Support for Compaq ASIC3"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
- select MFD_CORE
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
config MFD_DAVINCI_VOICECODEC
tristate
- select MFD_CORE
config MFD_DM355EVM_MSP
bool "DaVinci DM355 EVM microcontroller"
@@ -75,7 +67,6 @@ config MFD_DM355EVM_MSP
config MFD_TI_SSP
tristate "TI Sequencer Serial Port support"
depends on ARCH_DAVINCI_TNETV107X
- select MFD_CORE
---help---
Say Y here if you want support for the Sequencer Serial Port
in a Texas Instruments TNETV107X SoC.
@@ -93,7 +84,6 @@ config HTC_EGPIO
config HTC_PASIC3
tristate "HTC PASIC3 LED/DS1WM chip support"
- select MFD_CORE
help
This core driver provides register access for the LED/DS1WM
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
@@ -124,7 +114,6 @@ config TPS6105X
tristate "TPS61050/61052 Boost Converters"
depends on I2C
select REGULATOR
- select MFD_CORE
select REGULATOR_FIXED_VOLTAGE
help
This option enables a driver for the TP61050/TPS61052
@@ -147,7 +136,6 @@ config TPS65010
config TPS6507X
tristate "TPS6507x Power Management / Touch Screen chips"
- select MFD_CORE
depends on I2C
help
If you say yes here you get support for the TPS6507x series of
@@ -160,7 +148,6 @@ config TPS6507X
config MFD_TPS6586X
bool "TPS6586x Power Management chips"
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
- select MFD_CORE
help
If you say yes here you get support for the TPS6586X series of
Power Management chips.
@@ -174,7 +161,6 @@ config MFD_TPS6586X
config MFD_TPS65910
bool "TPS65910 Power Management chip"
depends on I2C=y && GPIOLIB
- select MFD_CORE
select GPIO_TPS65910
help
if you say yes here you get support for the TPS65910 series of
@@ -186,7 +172,6 @@ config MFD_TPS65912
config MFD_TPS65912_I2C
bool "TPS95612 Power Management chip with I2C"
- select MFD_CORE
select MFD_TPS65912
depends on I2C=y && GPIOLIB
help
@@ -195,7 +180,6 @@ config MFD_TPS65912_I2C
config MFD_TPS65912_SPI
bool "TPS65912 Power Management chip with SPI"
- select MFD_CORE
select MFD_TPS65912
depends on SPI_MASTER && GPIOLIB
help
@@ -252,7 +236,6 @@ config TWL4030_POWER
config MFD_TWL4030_AUDIO
bool
depends on TWL4030_CORE
- select MFD_CORE
default n
config TWL6030_PWM
@@ -267,13 +250,11 @@ config TWL6030_PWM
config TWL6040_CORE
bool
depends on TWL4030_CORE && GENERIC_HARDIRQS
- select MFD_CORE
default n
config MFD_STMPE
bool "Support STMicroelectronics STMPE"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
Support for the STMPE family of I/O Expanders from
STMicroelectronics.
@@ -296,7 +277,6 @@ config MFD_STMPE
config MFD_TC3589X
bool "Support Toshiba TC35892 and variants"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
Support for the Toshiba TC35892 and variants I/O Expander.
@@ -311,7 +291,6 @@ config MFD_TMIO
config MFD_T7L66XB
bool "Support Toshiba T7L66XB"
depends on ARM && HAVE_CLK
- select MFD_CORE
select MFD_TMIO
help
Support for Toshiba Mobile IO Controller T7L66XB
@@ -319,7 +298,6 @@ config MFD_T7L66XB
config MFD_TC6387XB
bool "Support Toshiba TC6387XB"
depends on ARM && HAVE_CLK
- select MFD_CORE
select MFD_TMIO
help
Support for Toshiba Mobile IO Controller TC6387XB
@@ -327,7 +305,6 @@ config MFD_TC6387XB
config MFD_TC6393XB
bool "Support Toshiba TC6393XB"
depends on GPIOLIB && ARM
- select MFD_CORE
select MFD_TMIO
help
Support for Toshiba Mobile IO Controller TC6393XB
@@ -356,7 +333,6 @@ config PMIC_ADP5520
config MFD_MAX8925
bool "Maxim Semiconductor MAX8925 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8925. This is
a Power Management IC. This driver provies common support for
@@ -366,7 +342,6 @@ config MFD_MAX8925
config MFD_MAX8997
bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8998/8966.
This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
@@ -378,7 +353,6 @@ config MFD_MAX8997
config MFD_MAX8998
bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8998 and
National Semiconductor LP3974. This is a Power Management IC.
@@ -388,7 +362,6 @@ config MFD_MAX8998
config MFD_WM8400
tristate "Support Wolfson Microelectronics WM8400"
- select MFD_CORE
depends on I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -402,7 +375,6 @@ config MFD_WM831X
config MFD_WM831X_I2C
bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
- select MFD_CORE
select MFD_WM831X
depends on I2C=y && GENERIC_HARDIRQS
help
@@ -413,7 +385,6 @@ config MFD_WM831X_I2C
config MFD_WM831X_SPI
bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
- select MFD_CORE
select MFD_WM831X
depends on SPI_MASTER && GENERIC_HARDIRQS
help
@@ -487,7 +458,6 @@ config MFD_WM8350_I2C
config MFD_WM8994
bool "Support Wolfson Microelectronics WM8994"
- select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS
help
The WM8994 is a highly integrated hi-fi CODEC designed for
@@ -526,7 +496,6 @@ config MFD_MC13783
config MFD_MC13XXX
tristate "Support Freescale MC13783 and MC13892"
depends on SPI_MASTER
- select MFD_CORE
select MFD_MC13783
help
Support for the Freescale (Atlas) PMIC and audio CODECs
@@ -548,7 +517,6 @@ config ABX500_CORE
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
depends on I2C=y && ABX500_CORE
- select MFD_CORE
default y if ARCH_U300
help
Select this to enable the AB3100 Mixed Signal IC core
@@ -579,7 +547,6 @@ config EZX_PCAP
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE
- select MFD_CORE
help
Select this option to enable access to AB8500 power management
chip. This connects to U8500 either on the SSP/SPI bus (deprecated
@@ -614,7 +581,6 @@ config AB8500_GPADC
config AB3550_CORE
bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
- select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
help
Select this to enable the AB3550 Mixed Signal IC core
@@ -629,7 +595,6 @@ config AB3550_CORE
config MFD_DB8500_PRCMU
bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
depends on UX500_SOC_DB8500
- select MFD_CORE
help
Select this option to enable support for the DB8500 Power Reset
and Control Management Unit. This is basically an autonomous
@@ -639,7 +604,6 @@ config MFD_DB8500_PRCMU
config MFD_DB5500_PRCMU
bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
depends on UX500_SOC_DB5500
- select MFD_CORE
help
Select this option to enable support for the DB5500 Power Reset
and Control Management Unit. This is basically an autonomous
@@ -648,7 +612,6 @@ config MFD_DB5500_PRCMU
config MFD_CS5535
tristate "Support for CS5535 and CS5536 southbridge core functions"
- select MFD_CORE
depends on PCI && X86
---help---
This is the core driver for CS5535/CS5536 MFD functions. This is
@@ -656,7 +619,6 @@ config MFD_CS5535
config MFD_TIMBERDALE
tristate "Support for the Timberdale FPGA"
- select MFD_CORE
depends on PCI && GPIOLIB
---help---
This is the core driver for the timberdale FPGA. This device is a
@@ -668,14 +630,12 @@ config MFD_TIMBERDALE
config LPC_SCH
tristate "Intel SCH LPC"
depends on PCI
- select MFD_CORE
help
LPC bridge function of the Intel SCH provides support for
System Management Bus and General Purpose I/O.
config MFD_RDC321X
tristate "Support for RDC-R321x southbridge"
- select MFD_CORE
depends on PCI
help
Say yes here if you want to have support for the RDC R-321x SoC
@@ -684,7 +644,6 @@ config MFD_RDC321X
config MFD_JANZ_CMODIO
tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
- select MFD_CORE
depends on PCI
help
This is the core driver for the Janz CMOD-IO PCI MODULbus
@@ -694,7 +653,6 @@ config MFD_JANZ_CMODIO
config MFD_JZ4740_ADC
bool "Support for the JZ4740 SoC ADC core"
- select MFD_CORE
select GENERIC_IRQ_CHIP
depends on MACH_JZ4740
help
@@ -704,7 +662,6 @@ config MFD_JZ4740_ADC
config MFD_VX855
tristate "Support for VIA VX855/VX875 integrated south bridge"
depends on PCI
- select MFD_CORE
help
Say yes here to enable support for various functions of the
VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
@@ -713,7 +670,6 @@ config MFD_VX855
config MFD_WL1273_CORE
tristate "Support for TI WL1273 FM radio."
depends on I2C
- select MFD_CORE
default n
help
This is the core driver for the TI WL1273 FM radio. This MFD
@@ -735,7 +691,6 @@ config MFD_PM8XXX
config MFD_PM8921_CORE
tristate "Qualcomm PM8921 PMIC chip"
depends on MSM_SSBI
- select MFD_CORE
select MFD_PM8XXX
help
If you say yes to this option, support will be included for the
@@ -762,7 +717,6 @@ config TPS65911_COMPARATOR
config MFD_AAT2870_CORE
bool "Support for the AnalogicTech AAT2870"
- select MFD_CORE
depends on I2C=y && GPIOLIB
help
If you say yes here you get support for the AAT2870.
@@ -770,7 +724,7 @@ config MFD_AAT2870_CORE
additional drivers must be enabled in order to use the
functionality of the device.
-endif # MFD_SUPPORT
+endif # MFD_CORE
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
