Hello list, I just bought a Tevii S660 DVB-S2 USb tunner and I have some problems with it. I already has the Tevii S470 card and it works great with this configuration: mkdir /usr/local/src/dvb cd /usr/local/src/dvb wget http://tevii.com/100315_Beta_linux_tevii_ds3000.rar unrar x 100315_Beta_linux_tevii_ds3000.rar cp *.fw /lib/firmware tar xjvf linux-tevii-ds3000.tar.bz2 cd linux-tevii-ds3000 make && make install I am using Debian Squeeze with stable kernel: 2.6.32-5-686 I configured the modprobe this way: # cat /etc/modprobe.d/options.conf #Tevii S470 options cx23885 adapter_nr=7 #Tevii S660 options dvb-usb-dw2102 adapter_nr=6 #Disable the IR options dvb-usb disable_rc_polling=1 At first time it works well, I just pluged it and it creates a dvb device on /dev/dvb/adapter6 and the dmesg is correct (I have not a copy of the message). I didn't try yet to watch any channel (I am uusing MythTV). I reboot the machine and there are some USB error on the boot secuence, something like this: ... device descriptor read/64, error -110 (Here is a photo of the screen: http://i53.tinypic.com/2u3z5s0.jpg) After a long boot, I execute the dmesg and this is what I get: [ 145.909045] usb 4-2: device descriptor read/64, error -110 [ 146.189073] usb 4-2: new full speed USB device using ohci_hcd and address 5 [ 151.208761] usb 4-2: device descriptor read/8, error -110 [ 156.329684] usb 4-2: device descriptor read/8, error -110 [ 156.612043] usb 4-2: new full speed USB device using ohci_hcd and address 6 [ 161.636610] usb 4-2: device descriptor read/8, error -110 [ 166.756544] usb 4-2: device descriptor read/8, error -110 [ 166.864081] hub 4-0:1.0: unable to enumerate USB device on port 2 And there is no device on lsusb. Then I try to boot without the device, it start well the machine, then plug the device and this is the dmesg: [ 162.372030] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 177.484038] usb 1-2: device descriptor read/64, error -110 [ 192.700039] usb 1-2: device descriptor read/64, error -110 [ 192.920036] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 208.028034] usb 1-2: device descriptor read/64, error -110 [ 223.252028] usb 1-2: device descriptor read/64, error -110 [ 223.465028] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 228.484176] usb 1-2: device descriptor read/8, error -110 [ 233.604097] usb 1-2: device descriptor read/8, error -110 [ 233.820029] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 238.840170] usb 1-2: device descriptor read/8, error -110 [ 243.961092] usb 1-2: device descriptor read/8, error -110 [ 244.064050] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 244.392034] usb 3-2: new full speed USB device using ohci_hcd and address 2 [ 259.568033] usb 3-2: device descriptor read/64, error -110 [ 274.848036] usb 3-2: device descriptor read/64, error -110 [ 275.128035] usb 3-2: new full speed USB device using ohci_hcd and address 3 I contact with Tevii, but there is no support for this device on Linux, they point me to go to http://mercurial.intuxication.org/hg/s2-liplianin/ I read some users having same problem with this device, here is one that resolve it uploading I new firmware on each boot: http://www.gilzad.de/blog/pivot/entry.php?id=7 Can you help with this? I am not an expert on kernel/driver/firmware, I will apreciate any help. Thanks for your help and best regards. -- Josu Lazkano -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
