No exactly knowledge, but I cannot see where you define used bandwidth.
Frequency and bandwidth are generally needed by every DVB-T tuner as
param. Maybe those just are defaulted to different defaults or no
default at all.
Antti
On 06/22/2011 01:05 PM, mutoid wrote:
Hello,
I have an Avermedia Super 007, installed in a headless Linux machine to
multicast some TV channels.
I use "mumudvb" and works fine, without problem. I can stream 4 TV channels
and 4 radios at once
But now I need to extract EPG data, using dbvtune and tv_grab_dvb
I tried 2 configurations:
* Kworld USB DVB-T + dvbtune + tv_grab_dvb = works fine
~# dvbtune -c 1 -f 770000
Using DVB card "Afatech AF9013 DVB-T"
tuning DVB-T (in United Kingdom) to 770000000 Hz
polling....
Getting frontend event
FE_STATUS:
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
FE_HAS_SYNC
Event: Frequency: 780600000
SymbolRate: 0
FEC_inner: 2
Bit error rate: 0
Signal strength: 51993
SNR: 120
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
FE_HAS_SYNC
* Avermedia Super 007 + dvbtune = no working
~# dvbtune -c 0 -f 770000
Using DVB card "Philips TDA10046H DVB-T"
tuning DVB-T (in United Kingdom) to 770000000 Hz
polling....
Getting frontend event
FE_STATUS:
polling....
polling....
polling....
polling....
Why can I use dvbtune with one USB card but not with a PCI card?
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
