Hi
I'm trying to run the X8507 MyGica plate, as I said in another post.
I notice that when I try to tune a channel, the frequency of the XC5000
is different from the central carrier as I would expect to happen. Is
this normal?
Can someone tell me where is the documentation of the XC5000 and MB86A20S.
Below are the results I get.
Thanks in advance
Alfredo
alfredo@linux:~> mplayer -dumpstream dvb://'Encuentro' -dumpfile
mplayer-dumpfile.ts
MPlayer dev-SVN-r33321-4.5-openSUSE Linux 11.4 (x86_64)-Packman (C)
2000-2011 MPlayer Team
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not open config files /home/alfredo/.lircrc and
/etc/lirc/lircrc
mplayer: No such file or directory
Failed to read LIRC config file ~/.lircrc.
Loading extension-related profile 'vo.vdpau'
Playing dvb://Encuentro.
dvb_tune Freq: 521142857
dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 544 bytes
dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 900 bytes
dvb_streaming_read, attempt N. 5 failed with errno 0 when reading 148 bytes
dvb_streaming_read, attempt N. 6 failed with errno 0 when reading 1256 bytes
dvb_streaming_read, attempt N. 5 failed with errno 0 when reading 1256 bytes
dmesg:
[ 2235.637152] mb86a20s: mb86a20s_initfe:
[ 2235.722354] mb86a20s: mb86a20s_initfe: Initialization succeeded.
[ 2235.722704] xc5000: xc5000_init()
[ 2235.723435] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
[ 2235.723437] xc5000: xc_initialize()
[ 2235.963737] xc5000: *** ADC envelope (0-1023) = 152
[ 2235.964451] xc5000: *** Frequency error = 62 Hz
[ 2235.965163] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[ 2235.966642] xc5000: *** HW: V03.02, FW: V01.06.0072
[ 2235.967376] xc5000: *** Horizontal sync frequency = 16526 Hz
[ 2235.968088] xc5000: *** Frame lines = 570
[ 2235.968851] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[ 2236.069395] mb86a20s: mb86a20s_set_frontend:
[ 2236.069749] mb86a20s: mb86a20s_set_frontend: Calling tuner set parameters
[ 2236.070487] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
[ 2236.070493] xc5000: xc5000_set_params() frequency=521142857 (Hz)
[ 2236.070497] xc5000: xc5000_set_params() OFDM
[ 2236.070501] xc5000: xc5000_set_params() frequency=519392857 (compensated)
[ 2236.070505] xc5000: xc_SetSignalSource(0) Source = ANTENNA
[ 2236.071793] xc5000: xc_SetTVStandard(0x8002,0x00c0)
[ 2236.071796] xc5000: xc_SetTVStandard() Standard = DTV6
[ 2236.081039] xc5000: xc_set_IF_frequency(freq_khz = 3300) freq_code =
0xd33
[ 2236.089762] xc5000: xc_tune_channel(519392857)
[ 2236.089764] xc5000: xc_set_RF_frequency(519392857)
[ 2236.342767] xc5000: *** ADC envelope (0-1023) = 932
[ 2236.343502] xc5000: *** Frequency error = 0 Hz
[ 2236.344204] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[ 2236.345670] xc5000: *** HW: V03.02, FW: V01.06.0072
[ 2236.346399] xc5000: *** Horizontal sync frequency = 15404 Hz
[ 2236.347129] xc5000: *** Frame lines = 65535
[ 2236.347925] xc5000: *** Quality (0:<8dB, 7:>56dB) = 1
[ 2236.350019] mb86a20s: mb86a20s_read_status:
[ 2236.351208] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.361292] mb86a20s: mb86a20s_read_status:
[ 2236.362471] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.372549] mb86a20s: mb86a20s_read_status:
[ 2236.373716] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.383789] mb86a20s: mb86a20s_read_status:
[ 2236.384970] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.395049] mb86a20s: mb86a20s_read_status:
[ 2236.396235] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.400035] mb86a20s: mb86a20s_read_status:
[ 2236.401226] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.401233] mb86a20s: mb86a20s_set_frontend:
[ 2236.401581] mb86a20s: mb86a20s_set_frontend: Calling tuner set parameters
[ 2236.402298] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
[ 2236.402303] xc5000: xc5000_set_params() frequency=521267857 (Hz)
[ 2236.402306] xc5000: xc5000_set_params() OFDM
[ 2236.402310] xc5000: xc5000_set_params() frequency=519517857 (compensated)
[ 2236.402314] xc5000: xc_SetSignalSource(0) Source = ANTENNA
[ 2236.403608] xc5000: xc_SetTVStandard(0x8002,0x00c0)
[ 2236.403611] xc5000: xc_SetTVStandard() Standard = DTV6
[ 2236.412019] xc5000: xc_set_IF_frequency(freq_khz = 3300) freq_code =
0xd33
[ 2236.420733] xc5000: xc_tune_channel(519517857)
[ 2236.420735] xc5000: xc_set_RF_frequency(519517857)
[ 2236.625772] xc5000: *** ADC envelope (0-1023) = 896
[ 2236.626507] xc5000: *** Frequency error = 0 Hz
[ 2236.627241] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[ 2236.628709] xc5000: *** HW: V03.02, FW: V01.06.0072
[ 2236.629443] xc5000: *** Horizontal sync frequency = 15641 Hz
[ 2236.630178] xc5000: *** Frame lines = 65535
[ 2236.630941] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[ 2236.633036] mb86a20s: mb86a20s_read_status:
[ 2236.634252] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.644330] mb86a20s: mb86a20s_read_status:
[ 2236.645509] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.655587] mb86a20s: mb86a20s_read_status:
[ 2236.656747] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.666879] mb86a20s: mb86a20s_read_status:
[ 2236.668062] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.678140] mb86a20s: mb86a20s_read_status:
[ 2236.679334] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.683021] mb86a20s: mb86a20s_read_status:
[ 2236.684202] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.684207] mb86a20s: mb86a20s_set_frontend:
[ 2236.684554] mb86a20s: mb86a20s_set_frontend: Calling tuner set parameters
[ 2236.685260] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
[ 2236.685262] xc5000: xc5000_set_params() frequency=521017857 (Hz)
[ 2236.685263] xc5000: xc5000_set_params() OFDM
[ 2236.685265] xc5000: xc5000_set_params() frequency=519267857 (compensated)
[ 2236.685267] xc5000: xc_SetSignalSource(0) Source = ANTENNA
[ 2236.686546] xc5000: xc_SetTVStandard(0x8002,0x00c0)
[ 2236.686548] xc5000: xc_SetTVStandard() Standard = DTV6
[ 2236.695018] xc5000: xc_set_IF_frequency(freq_khz = 3300) freq_code =
0xd33
[ 2236.703742] xc5000: xc_tune_channel(519267857)
[ 2236.703744] xc5000: xc_set_RF_frequency(519267857)
[ 2236.908773] xc5000: *** ADC envelope (0-1023) = 856
[ 2236.909507] xc5000: *** Frequency error = 0 Hz
[ 2236.910207] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[ 2236.911676] xc5000: *** HW: V03.02, FW: V01.06.0072
[ 2236.912410] xc5000: *** Horizontal sync frequency = 15771 Hz
[ 2236.913155] xc5000: *** Frame lines = 65535
[ 2236.913918] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[ 2236.916030] mb86a20s: mb86a20s_read_status:
[ 2236.917228] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
[ 2236.927307] mb86a20s: mb86a20s_read_status:
[ 2236.928480] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
…
[ 2239.576593] mb86a20s: mb86a20s_set_frontend: Calling tuner set parameters
[ 2239.577334] xc5000: xc5000_is_firmware_loaded() returns True id = 0x1388
[ 2239.577339] xc5000: xc5000_set_params() frequency=521017857 (Hz)
[ 2239.577342] xc5000: xc5000_set_params() OFDM
[ 2239.577346] xc5000: xc5000_set_params() frequency=519267857 (compensated)
[ 2239.577350] xc5000: xc_SetSignalSource(0) Source = ANTENNA
[ 2239.578642] xc5000: xc_SetTVStandard(0x8002,0x00c0)
[ 2239.578646] xc5000: xc_SetTVStandard() Standard = DTV6
[ 2239.587031] xc5000: xc_set_IF_frequency(freq_khz = 3300) freq_code =
0xd33
[ 2239.595735] xc5000: xc_tune_channel(519267857)
[ 2239.595737] xc5000: xc_set_RF_frequency(519267857)
[ 2239.800841] xc5000: *** ADC envelope (0-1023) = 916
[ 2239.801577] xc5000: *** Frequency error = 0 Hz
[ 2239.802277] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 1
[ 2239.803748] xc5000: *** HW: V03.02, FW: V01.06.0072
[ 2239.804454] xc5000: *** Horizontal sync frequency = 15870 Hz
[ 2239.805156] xc5000: *** Frame lines = 1023
[ 2239.805915] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[ 2239.808007] mb86a20s: mb86a20s_read_status:
[ 2239.809282] mb86a20s: mb86a20s_read_status: val = 2, status = 0x01
…
[ 2253.026267] mb86a20s: mb86a20s_read_status: val = 9, status = 0x1f
[ 2253.940496] xc5000: xc5000_sleep()
[ 2253.940504] xc5000: xc5000_TunerReset()
--
Dona tu voz
http://www.voxforge.org/es
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
