On Jun 7, 2011, at 2:45 AM, Radim wrote: > >> ------------ Pôvodná správa ------------ >> Od: Jarod Wilson <jarod@xxxxxxxxxx> >> Predmet: Re: Last key repeated after every keypress on remote control (saa7134 >> lirc devinput driver) >> Dátum: 06.6.2011 20:39:50 >> ---------------------------------------- >> Devin Heitmueller wrote: >> > On Mon, Jun 6, 2011 at 2:13 PM, Radim<radim100@xxxxxxxxx> wrote: >> >> Hello to everybody, >> >> I was redirected here from lirc mailinglist (reason is at the end). >> >> >> >> I'm asking for any help because I wasn't able to solve >> >> this problem by my self (and google of course). >> >> >> >> When I'm testing lirc configuration using irw, last pressed key is repeated >> >> just befor the new one: >> >> >> >> after pressing key 1: >> >> 0000000080010002 00 KEY_1 devinput >> >> >> >> after pressing key 2: >> >> 0000000080010002 00 KEY_1 devinput >> >> 0000000080010003 00 KEY_2 devinput >> >> >> >> after pressing key 3: >> >> 0000000080010003 00 KEY_2 devinput >> >> 0000000080010004 00 KEY_3 devinput >> >> >> >> after pressing key 4: >> >> 0000000080010004 00 KEY_3 devinput >> >> 0000000080010005 00 KEY_4 devinput >> >> >> >> after pressing key 5: >> >> 0000000080010005 00 KEY_4 devinput >> >> 0000000080010006 00 KEY_5 devinput >> >> >> >> >> >> My configuration: >> >> Archlinux (allways up-to-date) >> >> Asus MyCinema P7131 with remote control PC-39 >> >> lircd 0.9.0, driver devinput, default config file lirc.conf.devinput >> >> kernel 2.6.38 >> >> >> >> # ir-keytable >> >> Found /sys/class/rc/rc0/ (/dev/input/event5) with: >> >> Driver saa7134, table rc-asus-pc39 >> >> Supported protocols: NEC RC-5 RC-6 JVC SONY LIRC >> >> Enabled protocols: RC-5 >> >> Repeat delay = 500 ms, repeat period = 33 ms >> >> >> >> Answare from lirc-mainlinglist (Jarod Wilson): >> >> Looks like a bug in saa7134-input.c, which doesn't originate in lirc land, >> >> its from the kernel itself. The more apropos location to tackle this issue >> >> is linux-media@xxxxxxxxxxxxxxxx >> >> >> >> I can provide any other listings, just ask for them. >> >> >> >> Thank you for any help, >> >> Radim >> > >> > I actually sent Jarod a board specifically to investigate this issue >> > (the same issue occurs on the saa7134 based HVR-1150). I believe it's >> > on his TODO list. >> Yep, he chopped out the part of my reply where I said as much. :) >> Just waiting on the IR receiver cable to arrive, could well be here in today's mail... > > Oh, I misunderstood Jarod answer - he pointed me to this list as a right place for posting this possible bug in saa7134 driver, so I sent it also here. I was thinking that this is not a job for member of lirc developers, so I was trying luck here.. I work on both lirc and media tree drivers. In this case, lircd is doing exactly the right thing with the data its being fed, the bug is in the kernel driver, which is from the media tree. Best to discuss the bug on the list for the layer at which it exists. :) (No cable yet, still awaiting its arrival). -- Jarod Wilson jarod@xxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
