Update: There is a new / updated driver for the H7 over at TerraTec's site: http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz and this time, it includes instructions. Using these instructions and Xubuntu 10.10 with this kernel: tingo@vm:~$ uname -a Linux vm 2.6.35-28-generic-pae #50-Ubuntu SMP Fri Mar 18 20:43:15 UTC 2011 i686 GNU/Linux I was able to get the H7 recognized. From /var/log/messages: May 14 23:59:26 vm kernel: [ 4226.560048] usb 1-2: new high speed USB device using ehci_hcd and address 3 May 14 23:59:27 vm kernel: [ 4227.007366] az6007: henry :: az6007 usb module init May 14 23:59:27 vm kernel: [ 4227.007551] az6007: usb in operation failed. (-32) May 14 23:59:27 vm kernel: [ 4227.007795] az6007: FW GET_VERSION length: -32 May 14 23:59:27 vm kernel: [ 4227.007796] May 14 23:59:27 vm kernel: [ 4227.007798] az6007: cold: 1 May 14 23:59:27 vm kernel: [ 4227.007798] May 14 23:59:27 vm kernel: [ 4227.007800] dvb-usb: found a 'TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)' in cold state, will try to load a firmware May 14 23:59:27 vm kernel: [ 4227.009825] dvb-usb: downloading firmware from file 'dvb-usb-az6007-03.fw' May 14 23:59:27 vm kernel: [ 4227.084577] dvb-usb: found a 'TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)' in warm state. May 14 23:59:27 vm kernel: [ 4227.084674] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. May 14 23:59:27 vm kernel: [ 4227.302655] DVB: registering new adapter (TerraTec DTV StarBox DVB-T/C USB2.0 (az6007)) May 14 23:59:27 vm kernel: [ 4227.311991] dvb-usb: MAC address: c2:cd:0c:a3:10:00 May 14 23:59:27 vm kernel: [ 4227.312475] az6007: az6007_frontend_poweron adap=f34ee88c adap->dev=f34ee000 May 14 23:59:27 vm kernel: [ 4227.312478] May 14 23:59:28 vm kernel: [ 4227.720338] az6007: az6007_frontend_poweron May 14 23:59:28 vm kernel: [ 4227.720343] May 14 23:59:28 vm kernel: [ 4227.720349] az6007: az6007_frontend_reset adap=f34ee88c adap->dev=f34ee000 May 14 23:59:28 vm kernel: [ 4227.720352] May 14 23:59:28 vm kernel: [ 4228.332027] az6007: reset az6007 frontend May 14 23:59:28 vm kernel: [ 4228.332032] May 14 23:59:28 vm kernel: [ 4228.332036] az6007: az6007_frontend_attach May 14 23:59:28 vm kernel: [ 4228.332038] May 14 23:59:28 vm kernel: [ 4228.332040] az6007: az6007_drxk3913_config_DVBT May 14 23:59:28 vm kernel: [ 4228.332042] May 14 23:59:28 vm kernel: [ 4228.332046] state->frontend.ops = drxk3913_ops_dvbt May 14 23:59:28 vm kernel: [ 4228.332053] mt2063_attach: Attaching MT2063 May 14 23:59:28 vm kernel: [ 4228.332057] az6007: found STB6100 DVB-C/DVB-T frontend @0xc0 May 14 23:59:28 vm kernel: [ 4228.332059] May 14 23:59:28 vm kernel: [ 4228.332066] DVB: registering adapter 0 frontend 0 (DRXK3913 Multistandard DVB_T)... May 14 23:59:28 vm kernel: [ 4228.332278] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.5/usb1/1-2/input/input4 May 14 23:59:28 vm kernel: [ 4228.332335] dvb-usb: schedule remote query interval to 400 msecs. May 14 23:59:28 vm kernel: [ 4228.332341] dvb-usb: TerraTec DTV StarBox DVB-T/C USB2.0 (az6007) successfully initialized and connected. May 14 23:59:28 vm kernel: [ 4228.332385] usbcore: registered new interface driver dvb_usb_az6007 Unfortunately, I am not able to test if the driver works just now, because currently the driver only supports DVB-T, and I only have DVB-C. -- Regards, Torfinn Ingolfsen -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
