Re: Terratec Cinergy 1400 DVB-T RC not working anymore

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On May 3, 2011, at 11:47 AM, Devin Heitmueller wrote:

> On Tue, May 3, 2011 at 11:40 AM, Jarod Wilson <jarod@xxxxxxxxxxxx> wrote:
>> So there are really two issues here. First up, the default keymap
>> isn't correct for this device, and second, the behavior of the
>> hardware and/or driver is terrible, as only ~20% of keypresses
>> are getting though. The first is easy enough to remedy. The second
>> probably requires someone with the hardware to dig into its IR
>> handling routines in the kernel. (I haven't got the hardware).
> 
> Jarod,
> 
> If this is something you have an interest in digging into, I can
> probably find some cx88 hardware to loan you.  I don't have the
> Terratec board in question, but I probably have a PCTV 800i which I
> believe also does sampling via GPIO.

A quick look at the code suggests the 800i should indeed behave
more or less the same, barring any hardware-specific implementation
differences. Sure, might as well send one my way and I'll see what
I can see.


-- 
Jarod Wilson
jarod@xxxxxxxxxxxx



--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux