Em 20-04-2011 11:30, Stefan Ringel escreveu:
> Am 20.04.2011 14:38, schrieb Mauro Carvalho Chehab:
>> Em 20-04-2011 05:19, Stefan Ringel escreveu:
>>> Am 19.04.2011 23:22, schrieb Mauro Carvalho Chehab:
>>>> Em 04-04-2011 17:18, stefan.ringel@xxxxxxxx escreveu:
>>>>> From: Stefan Ringel<stefan.ringel@xxxxxxxx>
>>>>>
>>>>> add dtv78 parameter
>>>> The dtv78 entry is a hack meant for card usage in Australia, that
>>>> speeds up channel detection there. Again, it should be specified
>>>> only when needed, and at per-board basis.
>>> I have test and auto detect doesn't work right. That is also region
>>> specific staff and it's better to set outside. In other words in Germany
>>> it must set this param and in other country, which use only 7MHz or 8MHz it doesn't set (i.e. Australia).
>> xc3028 has a logic to detect and work on both Australia and Europe.
>> If that logic is broken, we should fix it, not adding a manual
>> parameter for it.
>>
> It positively a bug. When I use lower band (7MHz, load DTV7 SCODE) it doesn't work, then I go in the high band (8MHz, load DTV78, DTV8 SCODE) and have channels and can watch TV. If I go now in the lower band (7MHz, don't reload SCODE) it works. This effect is for me a bug.
The fix for it should be at xc3028. Please propose a patch for it. Maybe we should add there
a parameter for auto-detection, or to force it to use dtv78, if bandwith is > 6MHz.
>>>>> Signed-off-by: Stefan Ringel<stefan.ringel@xxxxxxxx>
>>>>> ---
>>>>> drivers/staging/tm6000/tm6000-cards.c | 11 +++++++++--
>>>>> 1 files changed, 9 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
>>>>> index eef58da..cf2e76c 100644
>>>>> --- a/drivers/staging/tm6000/tm6000-cards.c
>>>>> +++ b/drivers/staging/tm6000/tm6000-cards.c
>>>>> @@ -65,6 +65,9 @@ static unsigned int xc2028_mts;
>>>>> module_param(xc2028_mts, int, 0644);
>>>>> MODULE_PARM_DESC(xc2028_mts, "enable mts firmware (xc2028/3028 only)");
>>>>>
>>>>> +static unsigned int xc2028_dtv78;
>>>>> +module_param(xc2028_dtv78, int, 0644);
>>>>> +MODULE_PARM_DESC(xc2028_dtv78, "enable dualband config (xc2028/3028 only)");
>>>>>
>>>>> struct tm6000_board {
>>>>> char *name;
>>>>> @@ -687,8 +690,12 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
>>>>> ctl.read_not_reliable = 0;
>>>>> ctl.msleep = 10;
>>>>> ctl.demod = XC3028_FE_ZARLINK456;
>>>>> - ctl.vhfbw7 = 1;
>>>>> - ctl.uhfbw8 = 1;
>>>>> +
>>>>> + if (xc2028_dtv78) {
>>>>> + ctl.vhfbw7 = 1;
>>>>> + ctl.uhfbw8 = 1;
>>>>> + }
>>>>> +
>>>>> if (xc2028_mts)
>>>>> ctl.mts = 1;
>>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
