Em 04-04-2011 17:18, stefan.ringel@xxxxxxxx escreveu:
> From: Stefan Ringel <stefan.ringel@xxxxxxxx>
>
> add dtv78 parameter
The dtv78 entry is a hack meant for card usage in Australia, that
speeds up channel detection there. Again, it should be specified
only when needed, and at per-board basis.
>
>
> Signed-off-by: Stefan Ringel <stefan.ringel@xxxxxxxx>
> ---
> drivers/staging/tm6000/tm6000-cards.c | 11 +++++++++--
> 1 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
> index eef58da..cf2e76c 100644
> --- a/drivers/staging/tm6000/tm6000-cards.c
> +++ b/drivers/staging/tm6000/tm6000-cards.c
> @@ -65,6 +65,9 @@ static unsigned int xc2028_mts;
> module_param(xc2028_mts, int, 0644);
> MODULE_PARM_DESC(xc2028_mts, "enable mts firmware (xc2028/3028 only)");
>
> +static unsigned int xc2028_dtv78;
> +module_param(xc2028_dtv78, int, 0644);
> +MODULE_PARM_DESC(xc2028_dtv78, "enable dualband config (xc2028/3028 only)");
>
> struct tm6000_board {
> char *name;
> @@ -687,8 +690,12 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
> ctl.read_not_reliable = 0;
> ctl.msleep = 10;
> ctl.demod = XC3028_FE_ZARLINK456;
> - ctl.vhfbw7 = 1;
> - ctl.uhfbw8 = 1;
> +
> + if (xc2028_dtv78) {
> + ctl.vhfbw7 = 1;
> + ctl.uhfbw8 = 1;
> + }
> +
> if (xc2028_mts)
> ctl.mts = 1;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
