Am 19.04.2011 23:22, schrieb Mauro Carvalho Chehab:
Em 04-04-2011 17:18, stefan.ringel@xxxxxxxx escreveu:
From: Stefan Ringel<stefan.ringel@xxxxxxxx>
add dtv78 parameter
The dtv78 entry is a hack meant for card usage in Australia, that
speeds up channel detection there. Again, it should be specified
only when needed, and at per-board basis.
I have test and auto detect doesn't work right. That is also region
specific staff and it's better to set outside. In other words in Germany
it must set this param and in other country, which use only 7MHz or 8MHz
it doesn't set (i.e. Australia).
Signed-off-by: Stefan Ringel<stefan.ringel@xxxxxxxx>
---
drivers/staging/tm6000/tm6000-cards.c | 11 +++++++++--
1 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index eef58da..cf2e76c 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -65,6 +65,9 @@ static unsigned int xc2028_mts;
module_param(xc2028_mts, int, 0644);
MODULE_PARM_DESC(xc2028_mts, "enable mts firmware (xc2028/3028 only)");
+static unsigned int xc2028_dtv78;
+module_param(xc2028_dtv78, int, 0644);
+MODULE_PARM_DESC(xc2028_dtv78, "enable dualband config (xc2028/3028 only)");
struct tm6000_board {
char *name;
@@ -687,8 +690,12 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
ctl.read_not_reliable = 0;
ctl.msleep = 10;
ctl.demod = XC3028_FE_ZARLINK456;
- ctl.vhfbw7 = 1;
- ctl.uhfbw8 = 1;
+
+ if (xc2028_dtv78) {
+ ctl.vhfbw7 = 1;
+ ctl.uhfbw8 = 1;
+ }
+
if (xc2028_mts)
ctl.mts = 1;
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
