Hi Guennadi, Laurent, On 01/27/2011 12:46 AM, Guennadi Liakhovetski wrote: <snip> >> >>> I didn't realize the video port can further shift the data. Where can I >>> find this in the TRM? >> >> VPIN field of the CCDC_FMTCFG register. > > This only plays a role, if cam_d is set to 10 bits raw in > CCDC_SYN_MODE.DATSIZ, right? > I didn't understand from the TRM that this is the case. I also didn't see that VPIN is only relevant with parallel data. Is it so? <snip> >> It could be, yes. The other option is to modify the format at the CCDC input. >> I agree that both options have drawbacks. >> >> Hans, Guennadi, any opinion on this ? > > Looking at the "Data-Lane Shifter" table (12.27 in my datasheet, in the > "Bridge-Lane Shifter" chapter), I think, the first two columns are fixed > by the board design, right? So, our freedom lies only in one line there > and is a single parameter - the shift value. The output shifter (VPIN) is > independent from this one, but not unrelated. It seems logical to me to > relate the former one to CCDC's input pad, and the latter one to CCDC's > output pad. AFAIU, Laurent, your implementation in what concerns pad > configuration is: let the user configure all interfaces independently, and > first when we have to actually activate the pipeline (start streaming or > configure video buffers) we can verify, whether all parts fit together. > So, why don't we stay consistent and do the same here? Give the user both > parameters and see how clever they were in the end;) I also think, if we > later decide to add some consistency checks, we can always do it. > Are you proposing having different formats on each end of the link between the sensor and the CCDC? Or do you agree with my favored approach that the lane shift value be determined by the difference between the CCDC input format and the CCDC output format(s)? I assume the VPIN value will always just select the upper 10 bits of the format which the CCDC is outputting on its other output pad. I understand that Laurent is out until Monday, so I'll wait for him to weigh in on this again before moving forward. > Thanks > Guennadi > thanks, Michael MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
