Hi I've been trying to get the Svideo input on my HVR-1255 working. From the latest code in cx23885-cards.c, it seems that only DVB is supported. I have some experience writing Linux Kernel/Drivers so I'm determined to get this working. I copied the cx23885_boards[CX23885_BOARD_HAUPPAUGE_HVR1250] settings and did get the V4L layer connected enough to get a /dev/video0, albeit with only green video and no picture. I then realized that was probably a dumb thing to do (possibly damaging the GPIO), since the eeprom is clearly different based on what I saw in tveeprom.c. My question is, am I going down the right path to add this support? Should I go ahead and install Windows (sigh) and get the output from RegSpy? Are there any developer git trees that are focused on this area? Regards, Jon - cx23885[0]: subsystem: 0070:2259, board: Hauppauge WinTV-HVR1255 [card=20,autodetected] -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
