On Jan 16, 2011, at 10:29 PM, Andy Walls wrote: > On Sun, 2011-01-16 at 14:20 -0500, Andy Walls wrote: >> Mauro, >> >> Please pull the one ir-kbd-i2c change and multiple lirc_zilog changes >> for 2.6.38. >> >> The one ir-kbd-i2c change is to put back a case to have ir-kbd-i2c set >> defaults for I2C client address 0x71. I know I was the one who >> recommend that ir-kbd-i2c not do this, but I discovered pvrusb2 and bttv >> rely on it for the moment - Mea culpa. >> >> The lirc_zilog changes are tested to work with both Tx and Rx with an >> HVR-1600. I don't want to continue much further on lirc_zilog changes, >> unitl a few things happen: >> >> 1. I have developed, and have had tested, a patch for the pvrusb2 driver >> to allow the in kernel lirc_zilog to bind to a Z8 on a pvrusb2 supported >> device. > > Mauro, > > I have developed a patch for pvrusb2 and Mike Isely provided his Ack. I > have added it to my "z8" branch and this pull request. I've finally got around to trying it out with the HVR-1950 I've got here, and it does do the trick for ir-kbd-i2c (albeit I never see proper key repeats, only alternating press/release key events). Not working with lirc_zilog yet, it fails to load, due to an -EIO ret to one of the i2c_master_send() calls in lirc_zilog during probe of the TX side. Haven't looked into it any more than that yet. >> 2. Jarrod finishes his changes related to the Z8 chip for hdpvr and they >> are pulled into media_tree.git branch. They're in now. Still need to tweak the ir-kbd-i2c usage by hdpvr a bit, but at least I'm close to having other hardware to compare and contrast with, behavior-wise. >> 3. I hear from Jean, or whomever really cares about ir-kbd-i2c, if >> adding some new fields for struct IR_i2c_init_data is acceptable. >> Specifically, I'd like to add a transceiver_lock mutex, a transceiver >> reset callback, and a data pointer for that reset callback. >> (Only lirc_zilog would use the reset callback and data pointer.) >> >> 4. I find spare time ever again. Ha, I feel your pain... ;) -- Jarod Wilson jarod@xxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
