Hi Laurent,
On Tue, Feb 18, 2025 at 02:35:03PM +0200, Laurent Pinchart wrote:
> On Tue, Feb 18, 2025 at 12:55:22PM +0100, Tommaso Merciai wrote:
> > On Fri, Feb 14, 2025 at 02:29:51AM +0200, Laurent Pinchart wrote:
> > > On Mon, Feb 10, 2025 at 12:45:34PM +0100, Tommaso Merciai wrote:
> > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > >
> > > > The MIPI CSI-2 block on the Renesas RZ/V2H(P) SoC is similar to the one
> > > > found on the Renesas RZ/G2L SoC, with the following differences:
> > > > - A different D-PHY
> > > > - Additional registers for the MIPI CSI-2 link
> > > > - Only two clocks
> > > >
> > > > Add a new compatible string, `renesas,r9a09g057-csi2`, for the RZ/V2H(P)
> > > > SoC.
> > > >
> > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > > Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@xxxxxxxxxxxxxx>
> > > > ---
> > > > .../bindings/media/renesas,rzg2l-csi2.yaml | 63 ++++++++++++++-----
> > > > 1 file changed, 48 insertions(+), 15 deletions(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > > > index 7faa12fecd5b..0d07c55a3f35 100644
> > > > --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > > > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > > > @@ -17,12 +17,15 @@ description:
> > > >
> > > > properties:
> > > > compatible:
> > > > - items:
> > > > - - enum:
> > > > - - renesas,r9a07g043-csi2 # RZ/G2UL
> > > > - - renesas,r9a07g044-csi2 # RZ/G2{L,LC}
> > > > - - renesas,r9a07g054-csi2 # RZ/V2L
> > > > - - const: renesas,rzg2l-csi2
> > > > + oneOf:
> > > > + - items:
> > > > + - enum:
> > > > + - renesas,r9a07g043-csi2 # RZ/G2UL
> > > > + - renesas,r9a07g044-csi2 # RZ/G2{L,LC}
> > > > + - renesas,r9a07g054-csi2 # RZ/V2L
> > > > + - const: renesas,rzg2l-csi2
> > > > +
> > >
> > > I'd drop the empty line.
> >
> > I'll drop this line in v2, thanks.
> >
> > > > + - const: renesas,r9a09g057-csi2 # RZ/V2H(P)
> > > >
> > > > reg:
> > > > maxItems: 1
> > > > @@ -31,16 +34,24 @@ properties:
> > > > maxItems: 1
> > > >
> > > > clocks:
> > > > - items:
> > > > - - description: Internal clock for connecting CRU and MIPI
> > > > - - description: CRU Main clock
> > > > - - description: CRU Register access clock
> > > > + oneOf:
> > > > + - items:
> > > > + - description: Internal clock for connecting CRU and MIPI
> > > > + - description: CRU Main clock
> > > > + - description: CRU Register access clock
> > > > + - items:
> > > > + - description: CRU Main clock
> > > > + - description: CRU Register access clock
> > > >
> > > > clock-names:
> > > > - items:
> > > > - - const: system
> > > > - - const: video
> > > > - - const: apb
> > > > + oneOf:
> > > > + - items:
> > > > + - const: system
> > > > + - const: video
> > > > + - const: apb
> > > > + - items:
> > > > + - const: video
> > > > + - const: apb
> > >
> > > I would move the clocks and clock-names definitions to the conditional
> > > below. Otherwise I think a device tree that has two clocks only but
> > > incorrectly uses "system" and "video" instead of "video" and "apb" will
> > > validate.
> >
> > Agreed. Taking as reference your work done on renesas,fcp.yaml.
> > What about the following?
> >
> > clocks: true
> > clock-names: true
> >
> > Then move the clocks and clock-names below as you suggested
> > into the conditional block:
> >
> > allOf:
> > - if:
> > properties:
> > compatible:
> > contains:
> > const: renesas,r9a09g057-csi2
> > then:
> > properties:
> > clocks:
> > items:
> > - description: CRU Main clock
> > - description: CRU Register access clock
> > clock-names:
> > items:
> > - const: video
> > - const: apb
> >
> > else:
> > properties:
> > clocks:
> > items:
> > - description: Internal clock for connecting CRU and MIPI
> > - description: CRU Main clock
> > - description: CRU Register access clock
> > clock-names:
> > items:
> > - const: system
> > - const: video
> > - const: apb
> >
> > Thanks in advance.
>
> I do like that, but I think Krzysztof wasn't entirely happy with it (it
> could be a separate but similar issue though, I don't recall the
> details). I'd recommend checking with him (he's on CC, so he will
> probably reply unless the mail gets buried in a mailbox that I am sure
> fills up quite quickly).
I read a bit of the conversation you have on renesas,fcp.
If I'm not missing something the suggestion was to use (in my case):
clocks:
minItems: 2
maxItems: 3
clock-names:
minItems: 2
maxItems: 3
Instead of:
clocks: true
clock-names: true
Please correct me if I'm missing somenthing.
Thanks in advance.
>
> > > >
> > > > power-domains:
> > > > maxItems: 1
> > > > @@ -48,7 +59,7 @@ properties:
> > > > resets:
> > > > items:
> > > > - description: CRU_PRESETN reset terminal
> > > > - - description: CRU_CMN_RSTB reset terminal
> > > > + - description: CRU_CMN_RSTB reset terminal or D-PHY reset
> > > >
> > > > reset-names:
> > > > items:
> > > > @@ -101,6 +112,28 @@ required:
> > > > - reset-names
> > > > - ports
> > > >
> > > > +allOf:
> > > > + - if:
> > > > + properties:
> > > > + compatible:
> > > > + contains:
> > > > + const: renesas,r9a09g057-csi2
> > > > + then:
> > > > + properties:
> > > > + clocks:
> > > > + maxItems: 2
> > > > +
> > > > + clock-names:
> > > > + maxItems: 2
> > > > +
> > > > + else:
> > > > + properties:
> > > > + clocks:
> > > > + maxItems: 3
> > > > +
> > > > + clock-names:
> > > > + maxItems: 3
> > > > +
> > > > additionalProperties: false
> > > >
> > > > examples:
>
> --
> Regards,
>
> Laurent Pinchart
Thanks & Regards,
Tommaso
