Hi Laurent,
Thanks for your review.
On Fri, Feb 14, 2025 at 02:29:51AM +0200, Laurent Pinchart wrote:
> Hi Tommaso, Prabhakar,
>
> Thank you for the patch.
>
> On Mon, Feb 10, 2025 at 12:45:34PM +0100, Tommaso Merciai wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > The MIPI CSI-2 block on the Renesas RZ/V2H(P) SoC is similar to the one
> > found on the Renesas RZ/G2L SoC, with the following differences:
> > - A different D-PHY
> > - Additional registers for the MIPI CSI-2 link
> > - Only two clocks
> >
> > Add a new compatible string, `renesas,r9a09g057-csi2`, for the RZ/V2H(P)
> > SoC.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@xxxxxxxxxxxxxx>
> > ---
> > .../bindings/media/renesas,rzg2l-csi2.yaml | 63 ++++++++++++++-----
> > 1 file changed, 48 insertions(+), 15 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > index 7faa12fecd5b..0d07c55a3f35 100644
> > --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > @@ -17,12 +17,15 @@ description:
> >
> > properties:
> > compatible:
> > - items:
> > - - enum:
> > - - renesas,r9a07g043-csi2 # RZ/G2UL
> > - - renesas,r9a07g044-csi2 # RZ/G2{L,LC}
> > - - renesas,r9a07g054-csi2 # RZ/V2L
> > - - const: renesas,rzg2l-csi2
> > + oneOf:
> > + - items:
> > + - enum:
> > + - renesas,r9a07g043-csi2 # RZ/G2UL
> > + - renesas,r9a07g044-csi2 # RZ/G2{L,LC}
> > + - renesas,r9a07g054-csi2 # RZ/V2L
> > + - const: renesas,rzg2l-csi2
> > +
>
> I'd drop the empty line.
I'll drop this line in v2, thanks.
>
> > + - const: renesas,r9a09g057-csi2 # RZ/V2H(P)
> >
> > reg:
> > maxItems: 1
> > @@ -31,16 +34,24 @@ properties:
> > maxItems: 1
> >
> > clocks:
> > - items:
> > - - description: Internal clock for connecting CRU and MIPI
> > - - description: CRU Main clock
> > - - description: CRU Register access clock
> > + oneOf:
> > + - items:
> > + - description: Internal clock for connecting CRU and MIPI
> > + - description: CRU Main clock
> > + - description: CRU Register access clock
> > + - items:
> > + - description: CRU Main clock
> > + - description: CRU Register access clock
> >
> > clock-names:
> > - items:
> > - - const: system
> > - - const: video
> > - - const: apb
> > + oneOf:
> > + - items:
> > + - const: system
> > + - const: video
> > + - const: apb
> > + - items:
> > + - const: video
> > + - const: apb
>
> I would move the clocks and clock-names definitions to the conditional
> below. Otherwise I think a device tree that has two clocks only but
> incorrectly uses "system" and "video" instead of "video" and "apb" will
> validate.
Agreed. Taking as reference your work done on renesas,fcp.yaml.
What about the following?
clocks: true
clock-names: true
Then move the clocks and clock-names below as you suggested
into the conditional block:
allOf:
- if:
properties:
compatible:
contains:
const: renesas,r9a09g057-csi2
then:
properties:
clocks:
items:
- description: CRU Main clock
- description: CRU Register access clock
clock-names:
items:
- const: video
- const: apb
else:
properties:
clocks:
items:
- description: Internal clock for connecting CRU and MIPI
- description: CRU Main clock
- description: CRU Register access clock
clock-names:
items:
- const: system
- const: video
- const: apb
Thanks in advance.
>
> >
> > power-domains:
> > maxItems: 1
> > @@ -48,7 +59,7 @@ properties:
> > resets:
> > items:
> > - description: CRU_PRESETN reset terminal
> > - - description: CRU_CMN_RSTB reset terminal
> > + - description: CRU_CMN_RSTB reset terminal or D-PHY reset
> >
> > reset-names:
> > items:
> > @@ -101,6 +112,28 @@ required:
> > - reset-names
> > - ports
> >
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: renesas,r9a09g057-csi2
> > + then:
> > + properties:
> > + clocks:
> > + maxItems: 2
> > +
> > + clock-names:
> > + maxItems: 2
> > +
> > + else:
> > + properties:
> > + clocks:
> > + maxItems: 3
> > +
> > + clock-names:
> > + maxItems: 3
> > +
> > additionalProperties: false
> >
> > examples:
>
> --
> Regards,
>
> Laurent Pinchart
Thanks & Regards,
Tommaso
