The desired clock frequency was correctly set to 400MHz in the device tree but was lowered by the driver to 300MHz breaking 4K 60Hz content playback. Fix the issue by removing the driver call to clk_set_rate(), which reduce the amount of board specific code. Fixes: 003afda97c65 ("media: verisilicon: Enable AV1 decoder on rk3588") Signed-off-by: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx> --- This patch fixes user report of AV1 4K60 decoder not being fast enough on RK3588 based SoC. This is a break from Hantro original authors habbit of coding the frequencies in the driver instead of specifying this frequency in the device tree. The other calls to clk_set_rate() are left since this would require modifying many dtsi files, which would then be unsuitable for backport. --- drivers/media/platform/verisilicon/rockchip_vpu_hw.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/media/platform/verisilicon/rockchip_vpu_hw.c b/drivers/media/platform/verisilicon/rockchip_vpu_hw.c index 964122e7c355934cd80eb442219f6ba51bba8b71..9d8eab33556d62733ec7ec6b5e685c86ba7086e4 100644 --- a/drivers/media/platform/verisilicon/rockchip_vpu_hw.c +++ b/drivers/media/platform/verisilicon/rockchip_vpu_hw.c @@ -17,7 +17,6 @@ #define RK3066_ACLK_MAX_FREQ (300 * 1000 * 1000) #define RK3288_ACLK_MAX_FREQ (400 * 1000 * 1000) -#define RK3588_ACLK_MAX_FREQ (300 * 1000 * 1000) #define ROCKCHIP_VPU981_MIN_SIZE 64 @@ -440,10 +439,9 @@ static int rk3066_vpu_hw_init(struct hantro_dev *vpu) return 0; } +/* TODO just remove, the CLK are defined correctly in the DTS */ static int rk3588_vpu981_hw_init(struct hantro_dev *vpu) { - /* Bump ACLKs to max. possible freq. to improve performance. */ - clk_set_rate(vpu->clocks[0].clk, RK3588_ACLK_MAX_FREQ); return 0; } @@ -807,7 +805,6 @@ const struct hantro_variant rk3588_vpu981_variant = { .codec_ops = rk3588_vpu981_codec_ops, .irqs = rk3588_vpu981_irqs, .num_irqs = ARRAY_SIZE(rk3588_vpu981_irqs), - .init = rk3588_vpu981_hw_init, .clk_names = rk3588_vpu981_vpu_clk_names, .num_clocks = ARRAY_SIZE(rk3588_vpu981_vpu_clk_names) }; --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250217-b4-hantro-av1-clock-rate-e5497f1499df Best regards, -- Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>