Hi Nicolas
> -----Original Message-----
> From: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
> Sent: Tuesday, December 17, 2024 11:05 PM
> To: jackson.lee <jackson.lee@xxxxxxxxxxxxxxx>; mchehab@xxxxxxxxxx;
> hverkuil-cisco@xxxxxxxxx; sebastian.fricke@xxxxxxxxxxxxx;
> bob.beckett@xxxxxxxxxxxxx; dafna.hirschfeld@xxxxxxxxxxxxx
> Cc: linux-media@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; lafley.kim
> <lafley.kim@xxxxxxxxxxxxxxx>; b-brnich@xxxxxx; hverkuil@xxxxxxxxx; Nas
> Chung <nas.chung@xxxxxxxxxxxxxxx>
> Subject: Re: [PATCH v2 3/4] media: chips-media: wave5: Fix hang after
> seeking
>
> Le mardi 17 décembre 2024 à 13:51 +0900, Jackson.lee a écrit :
> > While seeking, driver calls flush command. Before flush command is
> > sent to VPU, driver should handle display buffer flags and should get
> > all decoded information from VPU if VCORE is running.
> >
> > Signed-off-by: Jackson.lee <jackson.lee@xxxxxxxxxxxxxxx>
> > Signed-off-by: Nas Chung <nas.chung@xxxxxxxxxxxxxxx>
> > Reviewed-by: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
>
> This one too please.
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer")
thanks
>
> > ---
> > .../platform/chips-media/wave5/wave5-vpu-dec.c | 17 ++++++++++++++++-
> > .../platform/chips-media/wave5/wave5-vpuapi.c | 10 ++++++++++
> > 2 files changed, 26 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
> > b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
> > index d3ff420c52ce..882d5539630f 100644
> > --- a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
> > +++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
> > @@ -1369,6 +1369,16 @@ static int streamoff_output(struct vb2_queue *q)
> > struct vb2_v4l2_buffer *buf;
> > int ret;
> > dma_addr_t new_rd_ptr;
> > + struct dec_output_info dec_info;
> > + unsigned int i;
> > +
> > + for (i = 0; i < v4l2_m2m_num_dst_bufs_ready(m2m_ctx); i++) {
> > + ret = wave5_vpu_dec_set_disp_flag(inst, i);
> > + if (ret)
> > + dev_dbg(inst->dev->dev,
> > + "%s: Setting display flag of buf index: %u,
> fail: %d\n",
> > + __func__, i, ret);
> > + }
> >
> > while ((buf = v4l2_m2m_src_buf_remove(m2m_ctx))) {
> > dev_dbg(inst->dev->dev, "%s: (Multiplanar) buf type %4u |
> index
> > %4u\n", @@ -1376,6 +1386,11 @@ static int streamoff_output(struct
> vb2_queue *q)
> > v4l2_m2m_buf_done(buf, VB2_BUF_STATE_ERROR);
> > }
> >
> > + while (wave5_vpu_dec_get_output_info(inst, &dec_info) == 0) {
> > + if (dec_info.index_frame_display >= 0)
> > + wave5_vpu_dec_set_disp_flag(inst,
> dec_info.index_frame_display);
> > + }
> > +
> > ret = wave5_vpu_flush_instance(inst);
> > if (ret)
> > return ret;
> > @@ -1459,7 +1474,7 @@ static void wave5_vpu_dec_stop_streaming(struct
> vb2_queue *q)
> > break;
> >
> > if (wave5_vpu_dec_get_output_info(inst, &dec_output_info))
> > - dev_dbg(inst->dev->dev, "Getting decoding results from
> fw, fail\n");
> > + dev_dbg(inst->dev->dev, "there is no output info\n");
> > }
> >
> > v4l2_m2m_update_stop_streaming_state(m2m_ctx, q); diff --git
> > a/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
> > b/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
> > index e16b990041c2..e5e879a13e8b 100644
> > --- a/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
> > +++ b/drivers/media/platform/chips-media/wave5/wave5-vpuapi.c
> > @@ -75,6 +75,16 @@ int wave5_vpu_flush_instance(struct vpu_instance
> *inst)
> > inst->type == VPU_INST_TYPE_DEC ? "DECODER" :
> "ENCODER", inst->id);
> > mutex_unlock(&inst->dev->hw_lock);
> > return -ETIMEDOUT;
> > + } else if (ret == -EBUSY) {
> > + struct dec_output_info dec_info;
> > +
> > + mutex_unlock(&inst->dev->hw_lock);
> > + wave5_vpu_dec_get_output_info(inst, &dec_info);
> > + ret = mutex_lock_interruptible(&inst->dev->hw_lock);
> > + if (ret)
> > + return ret;
> > + if (dec_info.index_frame_display > 0)
> > + wave5_vpu_dec_set_disp_flag(inst,
> dec_info.index_frame_display);
> > }
> > } while (ret != 0);
> > mutex_unlock(&inst->dev->hw_lock);
