Lontium LT9611UXE is a HDMI to MIPI CSI-2 bridge,
It supports modes up to 4k60fps, switches current mode when
plugging HDMI or changing the source active signal mode.
Signed-off-by: Dongcheng Yan <dongcheng.yan@xxxxxxxxx>
---
v1 -> v2: replaced mutex with state_lock
v2 -> v3: fixed some pm_runtime err handlings
---
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/lt6911uxe.c | 627 ++++++++++++++++++++++++++++++++++
3 files changed, 640 insertions(+)
create mode 100644 drivers/media/i2c/lt6911uxe.c
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 8ba096b8ebca..fbe3d0fe4ce6 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1526,6 +1526,18 @@ config VIDEO_I2C
To compile this driver as a module, choose M here: the
module will be called video-i2c
+config VIDEO_LT6911UXE
+ tristate "Lontium LT6911UXE decoder"
+ depends on ACPI && VIDEO_DEV
+ select V4L2_FWNODE
+ select V4L2_CCI_I2C
+ help
+ This is a Video4Linux2 sensor-level driver for the Lontium
+ LT6911UXE HDMI to MIPI CSI-2 bridge.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lt6911uxe.
+
config VIDEO_M52790
tristate "Mitsubishi M52790 A/V switch"
depends on VIDEO_DEV && I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index fbb988bd067a..6c23a4463527 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_VIDEO_ISL7998X) += isl7998x.o
obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
obj-$(CONFIG_VIDEO_LM3560) += lm3560.o
obj-$(CONFIG_VIDEO_LM3646) += lm3646.o
+obj-$(CONFIG_VIDEO_LT6911UXE) += lt6911uxe.o
obj-$(CONFIG_VIDEO_M52790) += m52790.o
obj-$(CONFIG_VIDEO_MAX9271_LIB) += max9271.o
obj-$(CONFIG_VIDEO_MAX9286) += max9286.o
diff --git a/drivers/media/i2c/lt6911uxe.c b/drivers/media/i2c/lt6911uxe.c
new file mode 100644
index 000000000000..61115b2bb92f
--- /dev/null
+++ b/drivers/media/i2c/lt6911uxe.c
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2023 - 2024 Intel Corporation.
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <media/v4l2-cci.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+
+#define LT6911UXE_CHIP_ID 0x2102
+#define REG_CHIP_ID CCI_REG16(0xe100)
+
+#define REG_ENABLE_I2C CCI_REG8(0xe0ee)
+#define REG_PIX_CLK CCI_REG24(0xe085)
+#define REG_BYTE_CLK CCI_REG24(0xe092)
+#define REG_H_TOTAL CCI_REG16(0xe088)
+#define REG_V_TOTAL CCI_REG16(0xe08a)
+#define REG_HALF_H_ACTIVE CCI_REG16(0xe08c)
+#define REG_V_ACTIVE CCI_REG16(0xe08e)
+#define REG_MIPI_FORMAT CCI_REG8(0xe096)
+#define REG_MIPI_TX_CTRL CCI_REG8(0xe0b0)
+
+/* Interrupts */
+#define REG_INT_HDMI CCI_REG8(0xe084)
+#define INT_VIDEO_DISAPPEAR 0x0
+#define INT_VIDEO_READY 0x1
+
+#define LT6911UXE_DEFAULT_WIDTH 3840
+#define LT6911UXE_DEFAULT_HEIGHT 2160
+#define LT6911UXE_DEFAULT_LANES 4
+#define LT6911UXE_DEFAULT_FPS 30
+#define LT6911UXE_MAX_LINK_FREQ 297000000
+#define LT9611_PAGE_CONTROL 0xff
+#define YUV422_8_BIT 0x7
+
+static const struct regmap_range_cfg lt9611uxe_ranges[] = {
+ {
+ .name = "register_range",
+ .range_min = 0,
+ .range_max = 0xffff,
+ .selector_reg = LT9611_PAGE_CONTROL,
+ .selector_mask = 0xff,
+ .selector_shift = 0,
+ .window_start = 0,
+ .window_len = 0x100,
+ },
+};
+
+static const struct regmap_config lt9611uxe_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xffff,
+ .ranges = lt9611uxe_ranges,
+ .num_ranges = ARRAY_SIZE(lt9611uxe_ranges),
+};
+
+struct lt6911uxe_mode {
+ u32 width;
+ u32 height;
+ u32 code;
+ u32 fps;
+ u32 lanes;
+ s64 link_freq;
+};
+
+struct lt6911uxe {
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct v4l2_ctrl_handler ctrl_handler;
+ struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *link_freq;
+
+ struct lt6911uxe_mode cur_mode;
+ struct regmap *regmap;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *irq_gpio;
+};
+
+static const struct v4l2_event lt6911uxe_ev_source_change = {
+ .type = V4L2_EVENT_SOURCE_CHANGE,
+ .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
+};
+
+static const struct v4l2_event lt6911uxe_ev_stream_end = {
+ .type = V4L2_EVENT_EOS,
+};
+
+static inline struct lt6911uxe *to_lt6911uxe(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct lt6911uxe, sd);
+}
+
+static const struct lt6911uxe_mode default_mode = {
+ .width = LT6911UXE_DEFAULT_WIDTH,
+ .height = LT6911UXE_DEFAULT_HEIGHT,
+ .code = MEDIA_BUS_FMT_UYVY8_1X16,
+ .fps = LT6911UXE_DEFAULT_FPS,
+ .lanes = LT6911UXE_DEFAULT_LANES,
+ .link_freq = LT6911UXE_MAX_LINK_FREQ,
+};
+
+static s64 get_pixel_rate(struct lt6911uxe *lt6911uxe)
+{
+ s64 pixel_rate;
+
+ pixel_rate = (s64)lt6911uxe->cur_mode.width *
+ lt6911uxe->cur_mode.height *
+ lt6911uxe->cur_mode.fps * 16;
+ do_div(pixel_rate, lt6911uxe->cur_mode.lanes);
+
+ return pixel_rate;
+}
+
+static int lt6911uxe_status_update(struct lt6911uxe *lt6911uxe)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(<6911uxe->sd);
+ u64 int_event;
+ u64 byte_clk, pixel_clk, fps, format;
+ u64 htotal, vtotal, half_width, height;
+ int ret = 0;
+
+ /* Read interrupt event */
+ cci_read(lt6911uxe->regmap, REG_INT_HDMI, &int_event, &ret);
+ if (ret)
+ return dev_err_probe(&client->dev, ret,
+ "failed to read interrupt event\n");
+
+ switch (int_event) {
+ case INT_VIDEO_READY:
+ cci_read(lt6911uxe->regmap, REG_BYTE_CLK, &byte_clk, &ret);
+ byte_clk *= 1000;
+ cci_read(lt6911uxe->regmap, REG_PIX_CLK, &pixel_clk, &ret);
+ pixel_clk *= 1000;
+
+ if (ret || byte_clk == 0 || pixel_clk == 0) {
+ dev_err(&client->dev,
+ "invalid ByteClock or PixelClock\n");
+ return -EINVAL;
+ }
+
+ cci_read(lt6911uxe->regmap, REG_H_TOTAL, &htotal, &ret);
+ cci_read(lt6911uxe->regmap, REG_V_TOTAL, &vtotal, &ret);
+ if (ret || htotal == 0 || vtotal == 0) {
+ dev_err(&client->dev, "invalid htotal or vtotal\n");
+ return -EINVAL;
+ }
+
+ fps = div_u64(pixel_clk, htotal * vtotal);
+ if (fps > 60) {
+ dev_err(&client->dev,
+ "max fps is 60, current fps: %llu\n", fps);
+ return -EINVAL;
+ }
+
+ cci_read(lt6911uxe->regmap, REG_HALF_H_ACTIVE,
+ &half_width, &ret);
+ cci_read(lt6911uxe->regmap, REG_V_ACTIVE, &height, &ret);
+ if (ret || half_width == 0 || half_width * 2 > 3840 ||
+ height == 0 || height > 2160) {
+ dev_err(&client->dev, "invalid width or height\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Get MIPI format, YUV422_8_BIT is expected in lt6911uxe
+ */
+ cci_read(lt6911uxe->regmap, REG_MIPI_FORMAT, &format, &ret);
+ if (format != YUV422_8_BIT) {
+ dev_err(&client->dev, "invalid MIPI format\n");
+ return -EINVAL;
+ }
+
+ lt6911uxe->cur_mode.height = height;
+ lt6911uxe->cur_mode.width = half_width * 2;
+ lt6911uxe->cur_mode.fps = fps;
+ /* MIPI Clock Rate = ByteClock × 4, defined in lt6911uxe spec */
+ lt6911uxe->cur_mode.link_freq = byte_clk * 4;
+ v4l2_subdev_notify_event(<6911uxe->sd,
+ <6911uxe_ev_source_change);
+ break;
+
+ case INT_VIDEO_DISAPPEAR:
+ cci_write(lt6911uxe->regmap, REG_MIPI_TX_CTRL, 0x0, NULL);
+ lt6911uxe->cur_mode.height = 0;
+ lt6911uxe->cur_mode.width = 0;
+ lt6911uxe->cur_mode.fps = 0;
+ lt6911uxe->cur_mode.link_freq = 0;
+ v4l2_subdev_notify_event(<6911uxe->sd,
+ <6911uxe_ev_stream_end);
+ break;
+
+ default:
+ return -ENOLINK;
+ }
+
+ return ret;
+}
+
+static int lt6911uxe_init_controls(struct lt6911uxe *lt6911uxe)
+{
+ struct v4l2_ctrl_handler *ctrl_hdlr;
+ s64 pixel_rate;
+ int ret;
+
+ ctrl_hdlr = <6911uxe->ctrl_handler;
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
+ if (ret)
+ return ret;
+
+ lt6911uxe->link_freq = v4l2_ctrl_new_std(ctrl_hdlr, NULL,
+ V4L2_CID_CUR_LINK_FREQ, 0,
+ LT6911UXE_MAX_LINK_FREQ, 1,
+ lt6911uxe->cur_mode.link_freq);
+
+ pixel_rate = get_pixel_rate(lt6911uxe);
+ lt6911uxe->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, NULL,
+ V4L2_CID_PIXEL_RATE,
+ pixel_rate, pixel_rate, 1,
+ pixel_rate);
+
+ if (ctrl_hdlr->error) {
+ ret = ctrl_hdlr->error;
+ goto hdlr_free;
+ }
+ lt6911uxe->sd.ctrl_handler = ctrl_hdlr;
+
+ return 0;
+
+hdlr_free:
+ v4l2_ctrl_handler_free(ctrl_hdlr);
+ return ret;
+}
+
+static void lt6911uxe_update_pad_format(const struct lt6911uxe_mode *mode,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ fmt->width = mode->width;
+ fmt->height = mode->height;
+ fmt->code = mode->code;
+ fmt->field = V4L2_FIELD_NONE;
+}
+
+static int lt6911uxe_enable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ u32 pad, u64 streams_mask)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct lt6911uxe *lt6911uxe = to_lt6911uxe(sd);
+ int ret;
+
+ ret = pm_runtime_resume_and_get(&client->dev);
+ if (ret < 0)
+ return ret;
+
+ cci_write(lt6911uxe->regmap, REG_MIPI_TX_CTRL, 0x1, &ret);
+ if (ret) {
+ dev_err(&client->dev, "failed to start stream: %d\n", ret);
+ goto err_rpm_put;
+ }
+
+ return 0;
+
+err_rpm_put:
+ pm_runtime_put(&client->dev);
+ return ret;
+}
+
+static int lt6911uxe_disable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ u32 pad, u64 streams_mask)
+{
+ struct lt6911uxe *lt6911uxe = to_lt6911uxe(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(<6911uxe->sd);
+ int ret;
+
+ ret = cci_write(lt6911uxe->regmap, REG_MIPI_TX_CTRL, 0x0, NULL);
+ if (ret)
+ dev_err(&client->dev, "failed to stop stream: %d\n", ret);
+
+ pm_runtime_put(&client->dev);
+ return 0;
+}
+
+static int lt6911uxe_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *fmt)
+{
+ struct lt6911uxe *lt6911uxe = to_lt6911uxe(sd);
+ u64 pixel_rate, link_freq;
+
+ lt6911uxe_update_pad_format(<6911uxe->cur_mode, &fmt->format);
+ *v4l2_subdev_state_get_format(sd_state, fmt->pad) = fmt->format;
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+ return 0;
+
+ pixel_rate = get_pixel_rate(lt6911uxe);
+ __v4l2_ctrl_modify_range(lt6911uxe->pixel_rate, pixel_rate,
+ pixel_rate, 1, pixel_rate);
+
+ link_freq = lt6911uxe->cur_mode.link_freq;
+ __v4l2_ctrl_modify_range(lt6911uxe->link_freq, link_freq,
+ link_freq, 1, link_freq);
+
+ return 0;
+}
+
+static int lt6911uxe_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct lt6911uxe *lt6911uxe = to_lt6911uxe(sd);
+
+ if (code->index)
+ return -EINVAL;
+
+ code->code = lt6911uxe->cur_mode.code;
+
+ return 0;
+}
+
+static int lt6911uxe_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct lt6911uxe *lt6911uxe = to_lt6911uxe(sd);
+
+ if (fse->index != 0)
+ return -EINVAL;
+
+ if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16)
+ return -EINVAL;
+
+ fse->min_width = lt6911uxe->cur_mode.width;
+ fse->max_width = fse->min_width;
+ fse->min_height = lt6911uxe->cur_mode.height;
+ fse->max_height = fse->min_height;
+
+ return 0;
+}
+
+static int lt6911uxe_enum_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ struct lt6911uxe *lt6911uxe = to_lt6911uxe(sd);
+
+ if (fie->index != 0)
+ return -EINVAL;
+
+ fie->interval.numerator = 1;
+ fie->interval.denominator = lt6911uxe->cur_mode.fps;
+
+ return 0;
+}
+
+static int lt6911uxe_init_state(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state)
+{
+ struct v4l2_subdev_format fmt = {
+ .which = V4L2_SUBDEV_FORMAT_TRY,
+ .pad = 0,
+ .format = {
+ .code = MEDIA_BUS_FMT_UYVY8_1X16,
+ .width = LT6911UXE_DEFAULT_WIDTH,
+ .height = LT6911UXE_DEFAULT_HEIGHT,
+ },
+ };
+
+ return lt6911uxe_set_format(sd, sd_state, &fmt);
+}
+
+static const struct v4l2_subdev_video_ops lt6911uxe_video_ops = {
+ .s_stream = v4l2_subdev_s_stream_helper,
+};
+
+static const struct v4l2_subdev_pad_ops lt6911uxe_pad_ops = {
+ .set_fmt = lt6911uxe_set_format,
+ .get_fmt = v4l2_subdev_get_fmt,
+ .enable_streams = lt6911uxe_enable_streams,
+ .disable_streams = lt6911uxe_disable_streams,
+ .enum_mbus_code = lt6911uxe_enum_mbus_code,
+ .enum_frame_size = lt6911uxe_enum_frame_size,
+ .enum_frame_interval = lt6911uxe_enum_frame_interval,
+};
+
+static const struct v4l2_subdev_core_ops lt6911uxe_subdev_core_ops = {
+ .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_ops lt6911uxe_subdev_ops = {
+ .core = <6911uxe_subdev_core_ops,
+ .video = <6911uxe_video_ops,
+ .pad = <6911uxe_pad_ops,
+};
+
+static const struct media_entity_operations lt6911uxe_subdev_entity_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct v4l2_subdev_internal_ops lt6911uxe_internal_ops = {
+ .init_state = lt6911uxe_init_state,
+};
+
+static int lt6911uxe_fwnode_parse(struct lt6911uxe *lt6911uxe,
+ struct device *dev)
+{
+ struct fwnode_handle *endpoint;
+ struct v4l2_fwnode_endpoint bus_cfg = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY,
+ };
+ int ret;
+
+ endpoint = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0,
+ FWNODE_GRAPH_ENDPOINT_NEXT);
+ if (!endpoint)
+ return dev_err_probe(dev, -EPROBE_DEFER,
+ "endpoint node not found\n");
+
+ ret = v4l2_fwnode_endpoint_parse(endpoint, &bus_cfg);
+ fwnode_handle_put(endpoint);
+ if (ret) {
+ dev_err(dev, "failed to parse endpoint node: %d\n", ret);
+ goto out_err;
+ }
+
+ /*
+ * Check the number of MIPI CSI2 data lanes,
+ * lt6911uxe only support 4 lanes.
+ */
+ if (bus_cfg.bus.mipi_csi2.num_data_lanes != LT6911UXE_DEFAULT_LANES) {
+ dev_err(dev, "only 4 data lanes are currently supported\n");
+ goto out_err;
+ }
+
+ return 0;
+
+out_err:
+ v4l2_fwnode_endpoint_free(&bus_cfg);
+ return ret;
+}
+
+static int lt6911uxe_identify_module(struct lt6911uxe *lt6911uxe,
+ struct device *dev)
+{
+ u64 val;
+ int ret = 0;
+
+ /* Chip ID should be confirmed when the I2C slave is active */
+ cci_write(lt6911uxe->regmap, REG_ENABLE_I2C, 0x1, &ret);
+ cci_read(lt6911uxe->regmap, REG_CHIP_ID, &val, &ret);
+ cci_write(lt6911uxe->regmap, REG_ENABLE_I2C, 0x0, &ret);
+ if (ret)
+ return dev_err_probe(dev, ret, "fail to read chip id\n");
+
+ if (val != LT6911UXE_CHIP_ID) {
+ return dev_err_probe(dev, -ENXIO, "chip id mismatch: %x!=%x\n",
+ LT6911UXE_CHIP_ID, (u16)val);
+ }
+
+ return 0;
+}
+
+static irqreturn_t lt6911uxe_threaded_irq_fn(int irq, void *dev_id)
+{
+ struct v4l2_subdev *sd = dev_id;
+ struct lt6911uxe *lt6911uxe = to_lt6911uxe(sd);
+ struct v4l2_subdev_state *state;
+
+ state = v4l2_subdev_lock_and_get_active_state(sd);
+ lt6911uxe_status_update(lt6911uxe);
+ v4l2_subdev_unlock_state(state);
+
+ return IRQ_HANDLED;
+}
+
+static void lt6911uxe_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct lt6911uxe *lt6911uxe = to_lt6911uxe(sd);
+
+ free_irq(gpiod_to_irq(lt6911uxe->irq_gpio), lt6911uxe);
+ v4l2_async_unregister_subdev(sd);
+ v4l2_subdev_cleanup(sd);
+ media_entity_cleanup(&sd->entity);
+ v4l2_ctrl_handler_free(<6911uxe->ctrl_handler);
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+}
+
+static int lt6911uxe_probe(struct i2c_client *client)
+{
+ struct lt6911uxe *lt6911uxe;
+ struct device *dev = &client->dev;
+ u64 irq_pin_flags;
+ int ret;
+
+ lt6911uxe = devm_kzalloc(dev, sizeof(*lt6911uxe), GFP_KERNEL);
+ if (!lt6911uxe)
+ return -ENOMEM;
+
+ /* define default mode: 4k@60fps, changed when interrupt occurs. */
+ lt6911uxe->cur_mode = default_mode;
+
+ lt6911uxe->regmap = devm_regmap_init_i2c(client,
+ <9611uxe_regmap_config);
+ if (IS_ERR(lt6911uxe->regmap))
+ return dev_err_probe(dev, PTR_ERR(lt6911uxe->regmap),
+ "failed to init CCI\n");
+
+ v4l2_i2c_subdev_init(<6911uxe->sd, client, <6911uxe_subdev_ops);
+
+ lt6911uxe->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_IN);
+ if (IS_ERR(lt6911uxe->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(lt6911uxe->reset_gpio),
+ "failed to get reset gpio\n");
+
+ lt6911uxe->irq_gpio = devm_gpiod_get(dev, "readystat", GPIOD_IN);
+ if (IS_ERR(lt6911uxe->irq_gpio))
+ return dev_err_probe(dev, PTR_ERR(lt6911uxe->irq_gpio),
+ "failed to get ready_stat gpio\n");
+
+ ret = lt6911uxe_fwnode_parse(lt6911uxe, dev);
+ if (ret)
+ return ret;
+
+ usleep_range(10000, 10500);
+
+ ret = lt6911uxe_identify_module(lt6911uxe, dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to find chip\n");
+
+ ret = lt6911uxe_init_controls(lt6911uxe);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to init control\n");
+
+ lt6911uxe->sd.dev = dev;
+ lt6911uxe->sd.internal_ops = <6911uxe_internal_ops;
+ lt6911uxe->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+ V4L2_SUBDEV_FL_HAS_EVENTS;
+ lt6911uxe->sd.entity.ops = <6911uxe_subdev_entity_ops;
+ lt6911uxe->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+ lt6911uxe->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(<6911uxe->sd.entity, 1, <6911uxe->pad);
+ if (ret) {
+ dev_err(dev, "failed to init entity pads: %d\n", ret);
+ goto v4l2_ctrl_handler_free;
+ }
+
+ /*
+ * Device is already turned on by i2c-core with ACPI domain PM.
+ * Enable runtime PM and turn off the device.
+ */
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_idle(dev);
+
+ ret = v4l2_subdev_init_finalize(<6911uxe->sd);
+ if (ret) {
+ dev_err(dev, "failed to init v4l2 subdev: %d\n", ret);
+ goto media_entity_cleanup;
+ }
+
+ /* Setting irq */
+ irq_pin_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT;
+
+ ret = request_threaded_irq(gpiod_to_irq(lt6911uxe->irq_gpio), NULL,
+ lt6911uxe_threaded_irq_fn,
+ irq_pin_flags, NULL, lt6911uxe);
+ if (ret) {
+ dev_err(dev, "failed to request IRQ: %d\n", ret);
+ goto subdev_cleanup;
+ }
+
+ ret = v4l2_async_register_subdev_sensor(<6911uxe->sd);
+ if (ret) {
+ dev_err(dev, "failed to register V4L2 subdev: %d\n", ret);
+ goto free_irq;
+ }
+
+ return 0;
+
+free_irq:
+ free_irq(gpiod_to_irq(lt6911uxe->irq_gpio), lt6911uxe);
+
+subdev_cleanup:
+ v4l2_subdev_cleanup(<6911uxe->sd);
+
+media_entity_cleanup:
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ media_entity_cleanup(<6911uxe->sd.entity);
+
+v4l2_ctrl_handler_free:
+ v4l2_ctrl_handler_free(lt6911uxe->sd.ctrl_handler);
+ return ret;
+}
+
+static const struct acpi_device_id lt6911uxe_acpi_ids[] = {
+ { "INTC10C5" },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, lt6911uxe_acpi_ids);
+
+static struct i2c_driver lt6911uxe_i2c_driver = {
+ .driver = {
+ .name = "lt6911uxe",
+ .acpi_match_table = ACPI_PTR(lt6911uxe_acpi_ids),
+ },
+ .probe = lt6911uxe_probe,
+ .remove = lt6911uxe_remove,
+};
+
+module_i2c_driver(lt6911uxe_i2c_driver);
+
+MODULE_AUTHOR("Yan Dongcheng <dongcheng.yan@xxxxxxxxx>");
+MODULE_DESCRIPTION("Lontium lt6911uxe HDMI to MIPI Bridge Driver");
+MODULE_LICENSE("GPL");
base-commit: 2f87d0916ce0d2925cedbc9e8f5d6291ba2ac7b2
