UB9702 does not have SP and EQ registers, but the driver uses them in
log_status(). Fix this by separating the SP and EQ related log_status()
work into a separate function (for clarity) and calling that function
only for UB960.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
---
drivers/media/i2c/ds90ub960.c | 90 ++++++++++++++++++++++++-------------------
1 file changed, 50 insertions(+), 40 deletions(-)
diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index 6266a4558eb8..2273e79430c0 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -2951,6 +2951,54 @@ static const struct v4l2_subdev_pad_ops ub960_pad_ops = {
.set_fmt = ub960_set_fmt,
};
+static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv,
+ unsigned int nport)
+{
+ struct device *dev = &priv->client->dev;
+ u8 eq_level;
+ s8 strobe_pos;
+ u8 v = 0;
+
+ /* Strobe */
+
+ ub960_read(priv, UB960_XR_AEQ_CTL1, &v);
+
+ dev_info(dev, "\t%s strobe\n",
+ (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) ? "Adaptive" :
+ "Manual");
+
+ if (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) {
+ ub960_read(priv, UB960_XR_SFILTER_CFG, &v);
+
+ dev_info(dev, "\tStrobe range [%d, %d]\n",
+ ((v >> UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) & 0xf) - 7,
+ ((v >> UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT) & 0xf) - 7);
+ }
+
+ ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
+
+ dev_info(dev, "\tStrobe pos %d\n", strobe_pos);
+
+ /* EQ */
+
+ ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v);
+
+ dev_info(dev, "\t%s EQ\n",
+ (v & UB960_RR_AEQ_BYPASS_ENABLE) ? "Manual" :
+ "Adaptive");
+
+ if (!(v & UB960_RR_AEQ_BYPASS_ENABLE)) {
+ ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX, &v);
+
+ dev_info(dev, "\tEQ range [%u, %u]\n",
+ (v >> UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) & 0xf,
+ (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf);
+ }
+
+ if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0)
+ dev_info(dev, "\tEQ level %u\n", eq_level);
+}
+
static int ub960_log_status(struct v4l2_subdev *sd)
{
struct ub960_data *priv = sd_to_ub960(sd);
@@ -2998,8 +3046,6 @@ static int ub960_log_status(struct v4l2_subdev *sd)
for (nport = 0; nport < priv->hw_data->num_rxports; nport++) {
struct ub960_rxport *rxport = priv->rxports[nport];
- u8 eq_level;
- s8 strobe_pos;
unsigned int i;
dev_info(dev, "RX %u\n", nport);
@@ -3035,44 +3081,8 @@ static int ub960_log_status(struct v4l2_subdev *sd)
ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v);
dev_info(dev, "\tcsi_err_counter %u\n", v);
- /* Strobe */
-
- ub960_read(priv, UB960_XR_AEQ_CTL1, &v);
-
- dev_info(dev, "\t%s strobe\n",
- (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) ? "Adaptive" :
- "Manual");
-
- if (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) {
- ub960_read(priv, UB960_XR_SFILTER_CFG, &v);
-
- dev_info(dev, "\tStrobe range [%d, %d]\n",
- ((v >> UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) & 0xf) - 7,
- ((v >> UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT) & 0xf) - 7);
- }
-
- ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
-
- dev_info(dev, "\tStrobe pos %d\n", strobe_pos);
-
- /* EQ */
-
- ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v);
-
- dev_info(dev, "\t%s EQ\n",
- (v & UB960_RR_AEQ_BYPASS_ENABLE) ? "Manual" :
- "Adaptive");
-
- if (!(v & UB960_RR_AEQ_BYPASS_ENABLE)) {
- ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX, &v);
-
- dev_info(dev, "\tEQ range [%u, %u]\n",
- (v >> UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) & 0xf,
- (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf);
- }
-
- if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0)
- dev_info(dev, "\tEQ level %u\n", eq_level);
+ if (!priv->hw_data->is_ub9702)
+ ub960_log_status_ub960_sp_eq(priv, nport);
/* GPIOs */
for (i = 0; i < UB960_NUM_BC_GPIOS; i++) {
--
2.43.0
