Use HZ_PER_MHZ instead of 1000000U.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/ds90ub960.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index 24198b803eff..6266a4558eb8 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -43,6 +43,7 @@
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
+#include <linux/units.h>
#include <linux/workqueue.h>
#include <media/i2c/ds90ub9xx.h>
@@ -1579,7 +1580,7 @@ static int ub960_rxport_wait_locks(struct ub960_data *priv,
if (priv->hw_data->is_ub9702) {
dev_dbg(dev, "\trx%u: locked, freq %llu Hz\n",
- nport, (v * 1000000ULL) >> 8);
+ nport, ((u64)v * HZ_PER_MHZ) >> 8);
} else {
ret = ub960_rxport_get_strobe_pos(priv, nport,
&strobe_pos);
@@ -1593,7 +1594,7 @@ static int ub960_rxport_wait_locks(struct ub960_data *priv,
dev_dbg(dev,
"\trx%u: locked, SP: %d, EQ: %u, freq %llu Hz\n",
nport, strobe_pos, eq_level,
- (v * 1000000ULL) >> 8);
+ ((u64)v * HZ_PER_MHZ) >> 8);
}
}
@@ -3020,7 +3021,7 @@ static int ub960_log_status(struct v4l2_subdev *sd)
dev_info(dev, "\trx_port_sts2 %#02x\n", v);
ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, &v16);
- dev_info(dev, "\tlink freq %llu Hz\n", (v16 * 1000000ULL) >> 8);
+ dev_info(dev, "\tlink freq %llu Hz\n", ((u64)v16 * HZ_PER_MHZ) >> 8);
ub960_rxport_read16(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v16);
dev_info(dev, "\tparity errors %u\n", v16);
@@ -3856,7 +3857,7 @@ static int ub960_enable_core_hw(struct ub960_data *priv)
dev_dbg(dev, "refclk valid %u freq %u MHz (clk fw freq %lu MHz)\n",
!!(dev_sts & BIT(4)), refclk_freq,
- clk_get_rate(priv->refclk) / 1000000);
+ clk_get_rate(priv->refclk) / HZ_PER_MHZ);
/* Disable all RX ports by default */
ret = ub960_write(priv, UB960_SR_RX_PORT_CTL, 0);
--
2.43.0
