UB9702 doesn't have the registers for SP and EQ. Adjust the code in
ub960_rxport_wait_locks() to not use those registers for UB9702. As
these values are only used for a debug print here, there's no functional
change.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
---
drivers/media/i2c/ds90ub960.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index b1e848678218..24198b803eff 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -1577,16 +1577,24 @@ static int ub960_rxport_wait_locks(struct ub960_data *priv,
ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, &v);
- ret = ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
- if (ret)
- return ret;
+ if (priv->hw_data->is_ub9702) {
+ dev_dbg(dev, "\trx%u: locked, freq %llu Hz\n",
+ nport, (v * 1000000ULL) >> 8);
+ } else {
+ ret = ub960_rxport_get_strobe_pos(priv, nport,
+ &strobe_pos);
+ if (ret)
+ return ret;
- ret = ub960_rxport_get_eq_level(priv, nport, &eq_level);
- if (ret)
- return ret;
+ ret = ub960_rxport_get_eq_level(priv, nport, &eq_level);
+ if (ret)
+ return ret;
- dev_dbg(dev, "\trx%u: locked, SP: %d, EQ: %u, freq %llu Hz\n",
- nport, strobe_pos, eq_level, (v * 1000000ULL) >> 8);
+ dev_dbg(dev,
+ "\trx%u: locked, SP: %d, EQ: %u, freq %llu Hz\n",
+ nport, strobe_pos, eq_level,
+ (v * 1000000ULL) >> 8);
+ }
}
return 0;
--
2.43.0
