Re: [PATCH 2/4] media: dt-bindings: Add OmniVision OV08X40

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bryan,

Thanks for the set.

On Thu, Sep 26, 2024 at 04:46:38PM +0100, Bryan O'Donoghue wrote:
> Add bindings for the already upstream OV08X40 to enable usage of this
> sensor on dts based systems.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
>  .../bindings/media/i2c/ovti,ov08x40.yaml           | 130 +++++++++++++++++++++
>  1 file changed, 130 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..250785f062d0146e8615d8f3e7700aebbd40b1dc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml
> @@ -0,0 +1,130 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (c) 2024 Linaro Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov08x40.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV08X40 CMOS Sensor
> +
> +maintainers:
> +  - Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> +
> +description: |-
> +  The Omnivision OV08X40 is a 9.2 megapixel, CMOS image sensor which supports.
> +  - Automatic black level calibration (ABLC)
> +  - Programmable controls for frame rate, mirror and flip, binning, cropping
> +    and windowing
> +  - Output formats 10-bit 4C RGB RAW, 10-bit Bayer RAW
> +  - 4-lane MIPI D-PHY TX @ 1 Gbps per lane
> +  - 2-lane MPIP D-PHY TX @ 2 Gbps per lane
> +  - Dynamic defect pixel cancellation
> +  - Standard SCCB command interface
> +
> +properties:
> +  compatible:
> +    const: ovti,ov08x40
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    description:
> +      Input clock for the sensor.
> +    items:
> +      - const: xvclk

This seems redundant.

> +
> +  clock-frequency:
> +    description:
> +      Frequency of the xvclk clock in Hertz.

Could you instead use the frequency already set, using assigned-clock* in
the example?

> +
> +  avdd-supply:
> +    description: Analogue circuit voltage supply.
> +
> +  dovdd-supply:
> +    description: I/O circuit voltage supply.
> +
> +  dvdd-supply:
> +    description: Digital circuit voltage supply.
> +
> +  reset-gpios:
> +    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            oneOf:
> +              - items:
> +                  - const: 1
> +                  - const: 2
> +              - items:
> +                  - const: 1
> +                  - const: 2
> +                  - const: 3
> +                  - const: 4
> +
> +          link-frequencies: true
> +
> +        required:
> +          - data-lanes
> +          - link-frequencies
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - clock-frequency
> +  - dovdd-supply
> +  - avdd-supply
> +  - dvdd-supply
> +  - reset-gpios
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ov08x40: camera@36 {
> +            compatible = "ovti,ov08x40";
> +            reg = <0x36>;
> +
> +            reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&cam_rgb_defaultt>;
> +
> +            clocks = <&ov08x40_clk>;
> +            clock-names = "xvclk";
> +            clock-frequency = <19200000>;
> +
> +            avdd-supply = <&vreg_l7b_2p8>;
> +            dvdd-supply = <&vreg_l7b_1p8>;
> +            dovdd-supply = <&vreg_l3m_1p8>;
> +
> +            port {
> +                ov08x40_ep: endpoint {
> +                    remote-endpoint = <&csiphy4_ep>;
> +                    data-lanes = <1 2 3 4>;
> +                    link-frequencies = /bits/ 64 <400000000>;
> +                };
> +            };
> +        };
> +    };
> +...
> 

-- 
Kind regards,

Sakari Ailus




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux