[PATCH 2/4] media: dt-bindings: Add OmniVision OV08X40

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add bindings for the already upstream OV08X40 to enable usage of this
sensor on dts based systems.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
 .../bindings/media/i2c/ovti,ov08x40.yaml           | 130 +++++++++++++++++++++
 1 file changed, 130 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..250785f062d0146e8615d8f3e7700aebbd40b1dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2024 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov08x40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV08X40 CMOS Sensor
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
+
+description: |-
+  The Omnivision OV08X40 is a 9.2 megapixel, CMOS image sensor which supports.
+  - Automatic black level calibration (ABLC)
+  - Programmable controls for frame rate, mirror and flip, binning, cropping
+    and windowing
+  - Output formats 10-bit 4C RGB RAW, 10-bit Bayer RAW
+  - 4-lane MIPI D-PHY TX @ 1 Gbps per lane
+  - 2-lane MPIP D-PHY TX @ 2 Gbps per lane
+  - Dynamic defect pixel cancellation
+  - Standard SCCB command interface
+
+properties:
+  compatible:
+    const: ovti,ov08x40
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Input clock for the sensor.
+    items:
+      - const: xvclk
+
+  clock-frequency:
+    description:
+      Frequency of the xvclk clock in Hertz.
+
+  avdd-supply:
+    description: Analogue circuit voltage supply.
+
+  dovdd-supply:
+    description: I/O circuit voltage supply.
+
+  dvdd-supply:
+    description: Digital circuit voltage supply.
+
+  reset-gpios:
+    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov08x40: camera@36 {
+            compatible = "ovti,ov08x40";
+            reg = <0x36>;
+
+            reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam_rgb_defaultt>;
+
+            clocks = <&ov08x40_clk>;
+            clock-names = "xvclk";
+            clock-frequency = <19200000>;
+
+            avdd-supply = <&vreg_l7b_2p8>;
+            dvdd-supply = <&vreg_l7b_1p8>;
+            dovdd-supply = <&vreg_l3m_1p8>;
+
+            port {
+                ov08x40_ep: endpoint {
+                    remote-endpoint = <&csiphy4_ep>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <400000000>;
+                };
+            };
+        };
+    };
+...

-- 
2.46.2





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux