On 10.12.2010 06:33, Dan Carpenter wrote:
Hi Sergej,
I'm hoping this patch will take care of the bug you reported:
https://bugzilla.kernel.org/show_bug.cgi?id=24602
Please try it out and let me know. I'll resend with a proper
signed-off-by if it fixes the problem. (I don't have the hardware to
test this myself).
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index a529619..5620e20 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -3302,6 +3302,7 @@ static int bttv_open(struct file *file)
* Let's first copy btv->init at fh, holding cap.vb_lock, and then work
* with the rest of init, holding btv->lock.
*/
+ mutex_init(&fh->cap.vb_lock);
mutex_lock(&fh->cap.vb_lock);
*fh = btv->init;
mutex_unlock(&fh->cap.vb_lock);
Hi,
it looks better. Now only 3 oopses.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.37-rc5-custom (sergej@xxxxxxxxxxxxxxxxx) (gcc version 4.5.1 20101125 (prerelease) (GCC) ) #2 SMP PREEMPT Fri Dec 10 09:59:51 MSK 2010
Command line: BOOT_IMAGE=/boot/vmlinuz26-custom root=/dev/disk/by-uuid/d950a14f-fc0c-451d-b0d4-f95c2adefee3 ro quiet radeon.modeset=1 video=DVI-I-1:1280x1024-24@60e video=9-pin.DIN-1:1024x768-24@60e 1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: P5K SE/EPU/P5K SE/EPU, BIOS 0201 02/01/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7ff80 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
Scanning 0 areas for low memory corruption
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007ff80000
0000000000 - 007fe00000 page 2M
007fe00000 - 007ff80000 page 4k
kernel direct mapping tables up to 7ff80000 @ 1fffc000-20000000
RAMDISK: 37e18000 - 37ff0000
ACPI: RSDP 00000000000fbd70 00014 (v00 ACPIAM)
ACPI: RSDT 000000007ff80000 0003C (v01 A_M_I_ OEMRSDT 02000801 MSFT 00000097)
ACPI: FACP 000000007ff80200 00084 (v02 A_M_I_ OEMFACP 02000801 MSFT 00000097)
ACPI: DSDT 000000007ff805c0 089D8 (v01 A0994 A0994000 00000000 INTL 20060113)
ACPI: FACS 000000007ff8e000 00040
ACPI: APIC 000000007ff80390 0006C (v01 A_M_I_ OEMAPIC 02000801 MSFT 00000097)
ACPI: MCFG 000000007ff80400 0003C (v01 A_M_I_ OEMMCFG 02000801 MSFT 00000097)
ACPI: OEMB 000000007ff8e040 00081 (v01 A_M_I_ AMI_OEM 02000801 MSFT 00000097)
ACPI: HPET 000000007ff88fa0 00038 (v01 A_M_I_ OEMHPET 02000801 MSFT 00000097)
ACPI: OSFR 000000007ff88fe0 000B0 (v01 A_M_I_ OEMOSFR 02000801 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0007ff80
On node 0 totalpages: 524045
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3919 pages, LIFO batch:0
DMA32 zone: 7111 pages used for memmap
DMA32 zone: 512953 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s81408 r8192 d20992 u524288
pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516872
Kernel command line: BOOT_IMAGE=/boot/vmlinuz26-custom root=/dev/disk/by-uuid/d950a14f-fc0c-451d-b0d4-f95c2adefee3 ro quiet radeon.modeset=1 video=DVI-I-1:1280x1024-24@60e video=9-pin.DIN-1:1024x768-24@60e 1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2054912k/2096640k available (3632k kernel code, 460k absent, 41268k reserved, 1642k data, 504k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:768
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 20971520 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2000.031 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.73 BogoMIPS (lpj=6666770)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20101013
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
APIC calibration not consistent with PM-Timer: 136ms instead of 100ms
APIC delta adjusted to PM-Timer: 1250041 (1708391)
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (8003.58 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007ff8e0d0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00214 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 000000007ff8e2f0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfe7ffc00-0xfe7fffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfe7ff800-0xfe7ffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:2921] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0xa000-0xa007]
pci 0000:00:1f.2: reg 14: [io 0x9c00-0x9c03]
pci 0000:00:1f.2: reg 18: [io 0x9880-0x9887]
pci 0000:00:1f.2: reg 1c: [io 0x9800-0x9803]
pci 0000:00:1f.2: reg 20: [io 0x9480-0x948f]
pci 0000:00:1f.2: reg 24: [io 0x9400-0x940f]
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io 0xb000-0xb007]
pci 0000:00:1f.5: reg 14: [io 0xac00-0xac03]
pci 0000:00:1f.5: reg 18: [io 0xa880-0xa887]
pci 0000:00:1f.5: reg 1c: [io 0xa800-0xa803]
pci 0000:00:1f.5: reg 20: [io 0xa480-0xa48f]
pci 0000:00:1f.5: reg 24: [io 0xa400-0xa40f]
pci 0000:01:00.0: [1002:95c5] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe8e0000-0xfe8effff 64bit]
pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa28] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:03:00.0: [11ab:6121] type 0 class 0x000101
pci 0000:03:00.0: reg 10: [io 0xdc00-0xdc07]
pci 0000:03:00.0: reg 14: [io 0xd880-0xd883]
pci 0000:03:00.0: reg 18: [io 0xd800-0xd807]
pci 0000:03:00.0: reg 1c: [io 0xd480-0xd483]
pci 0000:03:00.0: reg 20: [io 0xd400-0xd40f]
pci 0000:03:00.0: reg 24: [mem 0xfeaffc00-0xfeafffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [1969:1048] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [mem 0xfe9c0000-0xfe9fffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xfe9a0000-0xfe9bffff pref]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: [1102:0004] type 0 class 0x000401
pci 0000:05:00.0: reg 10: [io 0xe880-0xe89f]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.1: [1102:7003] type 0 class 0x000980
pci 0000:05:00.1: reg 10: [io 0xec00-0xec07]
pci 0000:05:00.1: supports D1 D2
pci 0000:05:00.2: [1102:4001] type 0 class 0x000c00
pci 0000:05:00.2: reg 10: [mem 0xfebff800-0xfebfffff]
pci 0000:05:00.2: reg 14: [mem 0xfebf8000-0xfebfbfff]
pci 0000:05:00.2: supports D1 D2
pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot
pci 0000:05:00.2: PME# disabled
pci 0000:05:01.0: [109e:036e] type 0 class 0x000400
pci 0000:05:01.0: reg 10: [mem 0xfdffe000-0xfdffefff pref]
pci 0000:05:01.1: [109e:0878] type 0 class 0x000480
pci 0000:05:01.1: reg 10: [mem 0xfdfff000-0xfdffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 000000007ff80000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x80000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [irq 6]
pnp 00:06: [dma 2]
pnp 00:06: [io 0x03f0-0x03f5]
pnp 00:06: [io 0x03f7]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0290-0x0297]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x004d]
pnp 00:08: [io 0x0050-0x005f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x0800-0x087f]
pnp 00:08: [io 0x0400-0x03ff disabled]
pnp 00:08: [io 0x0480-0x04bf]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed50000-0xfed8ffff]
pnp 00:08: [mem 0xffa00000-0xffafffff]
pnp 00:08: [mem 0xffb00000-0xffbfffff]
pnp 00:08: [mem 0xffe00000-0xffefffff]
pnp 00:08: [mem 0xfff00000-0xfffffffe]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0c: [irq 12]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0x7fffffff]
pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:07: [io 0x0290-0x0297] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0480-0x04bf] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:08: [mem 0xffa00000-0xffafffff] has been reserved
system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:08: [mem 0xffe00000-0xffefffff] has been reserved
system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
pci 0000:00:1c.0: BAR 14: assigned [mem 0xff600000-0xff9fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xffc00000-0xffdfffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xff400000-0xff5fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0xf000-0xffff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
pci 0000:00:1c.0: bridge window [mem 0xff600000-0xff9fffff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.4: bridge window [mem 0xffc00000-0xffdfffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.5: bridge window [mem 0xff400000-0xff5fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: enabling device (0106 -> 0107)
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xff600000-0xff9fffff]
pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 2 [mem 0xffc00000-0xffdfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xff400000-0xff5fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1888k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1291975620.299:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4017
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x220
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
udev[35]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Uniform Multi-Platform E-IDE driver
SCSI subsystem initialized
libata version 3.00 loaded.
pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:03:00.0: setting latency timer to 64
scsi0 : pata_marvell
scsi1 : pata_marvell
ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
ata2: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
ata1.00: ATA-7: SAMSUNG SP1614N, TM100-24, max UDMA/100
ata1.00: 312581808 sectors, multi 0: LBA48
ata1.01: ATAPI: _NEC DVD_RW ND-3500AG, 2.1B, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1614N TM10 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM _NEC DVD_RW ND-3500AG 2.1B PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
pata_acpi 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
pata_acpi 0000:00:1f.2: setting latency timer to 64
pata_acpi 0000:00:1f.2: PCI INT B disabled
pata_acpi 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
pata_acpi 0000:00:1f.5: setting latency timer to 64
pata_acpi 0000:00:1f.5: PCI INT B disabled
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] Attached SCSI disk
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with writeback data mode
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev[634]: starting version 164
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV620 0x1002:0x95C5).
[drm] register mmio base: 0xFE8E0000
[drm] register mmio size: 65536
ATOM BIOS: RV620
radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 1028652 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:01:00.0: irq 40 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV620 Microcode
radeon 0000:01:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
failed to evaluate ATIF got AE_BAD_PARAMETER
Radeon i2c bit bus 0x90: Test OK
Radeon i2c bit bus 0x91: Test OK
Radeon i2c bit bus 0x92: Test OK
Radeon i2c bit bus 0x93: bus seems to be busy
[drm:radeon_i2c_create] *ERROR* Failed to register bit i2c 0x93
Radeon i2c bit bus 0x14: Test OK
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DIN
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] VGA
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP1: INTERNAL_KLDSCP_LVTMA
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] forcing 9-pin.DIN-1 connector ON
[drm] forcing DVI-I-1 connector ON
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.7.0 20080528 for 0000:01:00.0 on minor 0
firewire_ohci 0000:05:00.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
firewire_ohci: Added fw-ohci device 0000:05:00.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [mem 0x00000400-0x0000040f 64bit disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
gameport gameport0: EMU10K1 is pci0000:05:00.1/gameport0, io 0xec00, speed 988kHz
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
Linux video capture interface: v2.00
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 251
IR LIRC bridge handler initialized
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
firewire_core: created device fw0: GUID 00023c0031057429, S400
EMU10K1_Audigy 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC883: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 42 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
atl1 0000:02:00.0: setting latency timer to 64
atl1 0000:02:00.0: version 2.1.3
udev[638]: renamed network interface eth0 to lan
L2TP core driver, V2.0
L2TP netlink interface
PPP generic driver version 2.4.2
NET: Registered protocol family 24
PPPoL2TP kernel driver, V2.0
L2TP IP encapsulation support (L2TPv3)
padlock: VIA PadLock Hash Engine not detected.
PPP MPPE Compression module registered
PPP BSD Compression module registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
fuse init (API version 7.15)
usbcore: registered new interface driver usblp
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
loop: module loaded
usb 1-6: new high speed USB device using ehci_hcd and address 4
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ide-cd driver 5.00
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
coretemp coretemp.0: TjMax is assumed as 100 C!
coretemp coretemp.1: TjMax is assumed as 100 C!
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
st: Version 20100829, fixed bufsize 32768, s/g segs 256
usb 2-3: new high speed USB device using ehci_hcd and address 2
gspca: v2.10.0 registered
usbcore: registered new interface driver zc3xx
scsi6 : usb-storage 2-3:1.0
rtusb init --->
=== pAd = ffffc900118f2000, size = 463344 ===
<-- RTMPAllocAdapterBlock, Status=0
------------[ cut here ]------------
WARNING: at include/linux/netdevice.h:1557 RtmpPhyNetDevInit+0xcc/0xe0 [rtnet3070ap]()
Hardware name: P5K SE/EPU
Modules linked in: rtnet3070ap(+) rt3070ap rtutil3070ap gspca_zc3xx gspca_main st iTCO_wdt iTCO_vendor_support asus_atk0110 nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack tun coretemp usbhid hid ide_cd_mod usb_storage loop rfcomm l2cap btusb bluetooth rfkill usblp fuse sr_mod uhci_hcd ehci_hcd usbcore bsd_comp sha1_generic arc4 ecb ppp_mppe ppp_synctty l2tp_ip l2tp_ppp pppox ppp_generic slhc l2tp_netlink l2tp_core atl1 mii ahci libahci snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_emu10k1 snd_util_mem snd_ac97_codec snd_rawmidi snd_hwdep snd_bt87x snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus shpchp pci_hotplug ir_lirc_codec lirc_dev videobuf_dma_sg ir_sony_decoder videobuf_core ir_jvc_decoder v4l2_common ir_rc6_decoder videodev v4l2_compat_ioctl32 ir_rc5_decoder v4l1_compat ir_nec_decoder ir_common ir_core serio_raw emu10k1_gp gameport psmouse evdev i2c_i801 firewire_ohci firewire_core crc_itu_t radeon ttm drm_kms_helper i2c_algo_bit drm i2c_core intel_agp intel_gtt cdrom thermal processor button rtc_cmos rtc_core rtc_lib reiserfs ext4 jbd2 crc16 ext3 mbcache jbd ata_generic ata_piix pata_acpi sd_mod pata_marvell libata scsi_mod ide_core
Pid: 1261, comm: modprobe Not tainted 2.6.37-rc5-custom #2
Call Trace:
[<ffffffff810561ea>] warn_slowpath_common+0x7a/0xb0
[<ffffffff81056235>] warn_slowpath_null+0x15/0x20
[<ffffffffa093ed8c>] RtmpPhyNetDevInit+0xcc/0xe0 [rtnet3070ap]
[<ffffffffa0940a86>] rt2870_probe.clone.5+0x226/0x4d0 [rtnet3070ap]
[<ffffffffa093f2b0>] ? MainVirtualIF_open+0x0/0x1f0 [rtnet3070ap]
[<ffffffffa093ec10>] ? MainVirtualIF_close+0x0/0xb0 [rtnet3070ap]
[<ffffffffa093ee10>] ? rt28xx_send_packets+0x0/0x50 [rtnet3070ap]
[<ffffffffa093e9a0>] ? rt28xx_ioctl+0x0/0x20 [rtnet3070ap]
[<ffffffffa093e850>] ? RT28xx_get_ether_stats+0x0/0x150 [rtnet3070ap]
[<ffffffffa0940d65>] rtusb_probe+0x35/0x60 [rtnet3070ap]
[<ffffffffa06f83a9>] usb_probe_interface+0x109/0x200 [usbcore]
[<ffffffff81298606>] driver_probe_device+0x96/0x1c0
[<ffffffff812987cb>] __driver_attach+0x9b/0xa0
[<ffffffff81298730>] ? __driver_attach+0x0/0xa0
[<ffffffff8129750e>] bus_for_each_dev+0x5e/0x90
[<ffffffff812982a9>] driver_attach+0x19/0x20
[<ffffffff81297e30>] bus_add_driver+0x160/0x310
[<ffffffff81298a41>] driver_register+0x71/0x140
[<ffffffff81385b2b>] ? printk+0x3c/0x41
[<ffffffffa06f70c8>] usb_register_driver+0xb8/0x170 [usbcore]
[<ffffffffa0946000>] ? init_module+0x0/0x2e [rtnet3070ap]
[<ffffffffa094602c>] init_module+0x2c/0x2e [rtnet3070ap]
[<ffffffff8100212f>] do_one_initcall+0x3f/0x180
[<ffffffff81092d4b>] sys_init_module+0xbb/0x200
[<ffffffff8100bf12>] system_call_fastpath+0x16/0x1b
---[ end trace 791308412a1c347c ]---
netif_stop_queue() cannot be called before register_netdev()
usbcore: registered new interface driver rt2870
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0973600
vboxdrv: fAsync=0 offMin=0x1a4 offMax=0x7e4
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.12_OSE (interface 0x00140001).
usb 3-2: new full speed USB device using uhci_hcd and address 2
gspca: probing 041e:401f
EXT3-fs (sda1): using internal journal
JFS: nTxBlock = 8192, nTxLock = 65536
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb2): mounted filesystem with writeback data mode
scsi 6:0:0:0: Direct-Access USB2.0 CardReader CF 0100 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access USB2.0 CardReader SM XD 0100 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access USB2.0 CardReader MS 0100 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:1: [sdd] Attached SCSI removable disk
EXT3-fs: barriers not enabled
scsi 6:0:0:3: Direct-Access USB2.0 CardReader SD 0100 PQ: 0 ANSI: 0
sd 6:0:0:2: [sde] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Attached SCSI removable disk
EXT3-fs (loop0): warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3-fs (loop0): using internal journal
EXT3-fs (loop0): mounted filesystem with writeback data mode
zc3xx: probe 2wr ov vga 0x0000
zc3xx: probe 3wr vga 1 0xc000
zc3xx: probe sensor -> 0012
zc3xx: Find Sensor TAS5130C
input: zc3xx as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/input/input5
gspca: video0 created
usb 5-1: new low speed USB device using uhci_hcd and address 2
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input6
generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.2-1/input0
usb 7-2: new full speed USB device using uhci_hcd and address 2
usb 7-2: device descriptor read/64, error -71
usb 7-2: device descriptor read/64, error -71
usb 7-2: new full speed USB device using uhci_hcd and address 3
usb 7-2: device descriptor read/64, error -71
usb 7-2: device descriptor read/64, error -71
usb 7-2: new full speed USB device using uhci_hcd and address 4
usb 7-2: device not accepting address 4, error -71
usb 7-2: new full speed USB device using uhci_hcd and address 5
usb 7-2: device not accepting address 5, error -71
hub 7-0:1.0: unable to enumerate USB device on port 2
bttv: driver version 0.9.18 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
bttv0: Bt878 (rev 17) at 0000:05:01.0, irq: 17, latency: 64, mmio: 0xfdffe000
bttv0: using: ProVideo PV951 [card=42,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bt878 #0 [sw]: Test OK
bttv0: tuner type=1
tvaudio 4-004b: pic16c54 (PV951) found @ 0x96 (bt878 #0 [sw])
All bytes are equal. It is not a TEA5767
tuner 4-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner-simple 4-0060: creating new instance
tuner-simple 4-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles))
bttv0: registered device video1
bttv0: registered device vbi0
------------[ cut here ]------------
WARNING: at kernel/mutex.c:312 __mutex_unlock_slowpath+0xf6/0x140()
Hardware name: P5K SE/EPU
Modules linked in: tuner_simple tuner_types tea5767 tda7432 bttv(+) btcx_risc tveeprom tuner tvaudio jfs vboxnetflt vboxnetadp vboxdrv usbserial rtnet3070ap rt3070ap rtutil3070ap gspca_zc3xx gspca_main st iTCO_wdt iTCO_vendor_support asus_atk0110 nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack tun coretemp usbhid hid ide_cd_mod usb_storage loop rfcomm l2cap btusb bluetooth rfkill usblp fuse sr_mod uhci_hcd ehci_hcd usbcore bsd_comp sha1_generic arc4 ecb ppp_mppe ppp_synctty l2tp_ip l2tp_ppp pppox ppp_generic slhc l2tp_netlink l2tp_core atl1 mii ahci libahci snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_emu10k1 snd_util_mem snd_ac97_codec snd_rawmidi snd_hwdep snd_bt87x snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus shpchp pci_hotplug ir_lirc_codec lirc_dev videobuf_dma_sg ir_sony_decoder videobuf_core ir_jvc_decoder v4l2_common ir_rc6_decoder videodev v4l2_compat_ioctl32 ir_rc5_decoder v4l1_compat ir_nec_decoder ir_common ir_core serio_raw emu10k1_gp gameport psmouse evdev i2c_i801
bttv0: PLL: 28636363 => 35468950 . firewire_ohci firewire_core crc_itu_t radeon ttm drm_kms_helper i2c_algo_bit drm i2c_core intel_agp intel_gtt cdrom thermal processor button rtc_cmos rtc_core rtc_lib reiserfs ext4 jbd2 crc16 ext3 mbcache jbd ata_generic ata_piix pata_acpi sd_mod pata_marvell libata scsi_mod ide_core
Pid: 1695, comm: v4l_id Tainted: G W 2.6.37-rc5-custom #2
Call Trace:
[<ffffffff810561ea>] warn_slowpath_common+0x7a/0xb0
[<ffffffff81056235>] warn_slowpath_null+0x15/0x20
[<ffffffff81387cb6>] __mutex_unlock_slowpath+0xf6/0x140
[<ffffffff81387d09>] mutex_unlock+0x9/0x10
. [<ffffffffa0b8731b>] bttv_open+0x12b/0x380 [bttv]
[<ffffffffa04366c9>] v4l2_open+0xd9/0x100 [videodev]
[<ffffffff81133267>] chrdev_open+0x127/0x270
[<ffffffff81133140>] ? chrdev_open+0x0/0x270
[<ffffffff8112d16d>] __dentry_open+0x11d/0x3c0
[<ffffffff811b2dd5>] ? devcgroup_inode_permission+0x125/0x150
[<ffffffff8112e3b1>] nameidata_to_filp+0x61/0x70
[<ffffffff8113ce00>] do_last+0x480/0x740
[<ffffffff8113d2ad>] do_filp_open+0x1ed/0x680
ok
[<ffffffff8113072d>] ? fput+0x17d/0x230
[<ffffffff81148a54>] ? alloc_fd+0xf4/0x150
[<ffffffff8112e423>] do_sys_open+0x63/0x110
[<ffffffff8112e4eb>] sys_open+0x1b/0x20
[<ffffffff8100bf12>] system_call_fastpath+0x16/0x1b
---[ end trace 791308412a1c347d ]---
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: [<ffffffff810880db>] debug_mutex_wake_waiter+0x3b/0x110
i2c i2c-4: Failed to register i2c client ir_video at 0x4b (-16)
PGD 76802067 PUD 76801067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/bus/pci/drivers/bttv/uevent
CPU 1
Modules linked in: tuner_simple tuner_types tea5767 tda7432 bttv btcx_risc tveeprom tuner tvaudio jfs vboxnetflt vboxnetadp vboxdrv usbserial rtnet3070ap rt3070ap rtutil3070ap gspca_zc3xx gspca_main st iTCO_wdt iTCO_vendor_support asus_atk0110 nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack tun coretemp usbhid hid ide_cd_mod usb_storage loop rfcomm l2cap btusb bluetooth rfkill usblp fuse sr_mod uhci_hcd ehci_hcd usbcore bsd_comp sha1_generic arc4 ecb ppp_mppe ppp_synctty l2tp_ip l2tp_ppp pppox ppp_generic slhc l2tp_netlink l2tp_core atl1 mii ahci libahci snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_emu10k1 snd_util_mem snd_ac97_codec snd_rawmidi snd_hwdep snd_bt87x snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus shpchp pci_hotplug ir_lirc_codec lirc_dev videobuf_dma_sg ir_sony_decoder videobuf_core ir_jvc_decoder v4l2_common ir_rc6_decoder videodev v4l2_compat_ioctl32 ir_rc5_decoder v4l1_compat ir_nec_decoder ir_common ir_core serio_raw emu10k1_gp gameport psmouse evdev i2c_i801 firewire_ohci firewire_core crc_itu_t radeon ttm drm_kms_helper i2c_algo_bit drm i2c_core intel_agp intel_gtt cdrom thermal processor button rtc_cmos rtc_core rtc_lib reiserfs ext4 jbd2 crc16 ext3 mbcache jbd ata_generic ata_piix pata_acpi sd_mod pata_marvell libata scsi_mod ide_core
Pid: 1695, comm: v4l_id Tainted: G W 2.6.37-rc5-custom #2 P5K SE/EPU/P5K SE/EPU
RIP: 0010:[<ffffffff810880db>] [<ffffffff810880db>] debug_mutex_wake_waiter+0x3b/0x110
RSP: 0018:ffff88007683fb78 EFLAGS: 00010003
RAX: ffff880077fe7020 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff880077fe7018
RBP: ffff88007683fb88 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff813c98c0 R11: ffff88007b3b054f R12: ffff880077fe7018
R13: 0000000000000000 R14: 0000000000000001 R15: ffff880077f767c0
FS: 00007f9cd96b0700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 000000007682f000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process v4l_id (pid: 1695, threadinfo ffff88007683e000, task ffff880079f9a2b0)
Stack:
ffff880077fe7018 0000000000000246 ffff88007683fbb8 ffffffff81387c5b
0000000000000001 ffff880077f76000 ffff880077fe7000 ffff880077fe7018
ffff88007683fbc8 ffffffff81387d09 ffff88007683fc38 ffffffffa0b8731b
Call Trace:
[<ffffffff81387c5b>] __mutex_unlock_slowpath+0x9b/0x140
[<ffffffff81387d09>] mutex_unlock+0x9/0x10
[<ffffffffa0b8731b>] bttv_open+0x12b/0x380 [bttv]
[<ffffffffa04366c9>] v4l2_open+0xd9/0x100 [videodev]
[<ffffffff81133267>] chrdev_open+0x127/0x270
[<ffffffff81133140>] ? chrdev_open+0x0/0x270
[<ffffffff8112d16d>] __dentry_open+0x11d/0x3c0
[<ffffffff811b2dd5>] ? devcgroup_inode_permission+0x125/0x150
[<ffffffff8112e3b1>] nameidata_to_filp+0x61/0x70
[<ffffffff8113ce00>] do_last+0x480/0x740
[<ffffffff8113d2ad>] do_filp_open+0x1ed/0x680
[<ffffffff8113072d>] ? fput+0x17d/0x230
[<ffffffff81148a54>] ? alloc_fd+0xf4/0x150
[<ffffffff8112e423>] do_sys_open+0x63/0x110
[<ffffffff8112e4eb>] sys_open+0x1b/0x20
[<ffffffff8100bf12>] system_call_fastpath+0x16/0x1b
Code: 1c 24 4c 89 64 24 08 48 89 f3 49 89 fc 85 c9 75 25 8b 57 04 89 d0 c1 f8 08 31 d0 84 c0 74 5c 49 8d 44 24 08 49 39 44 24 08 74 33 <48> 3b 5b 18 75 10 48 3b 1b 74 62 48 8b 1c 24 4c 8b 64 24 08 c9
RIP [<ffffffff810880db>] debug_mutex_wake_waiter+0x3b/0x110
RSP <ffff88007683fb78>
CR2: 0000000000000018
---[ end trace 791308412a1c347e ]---
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: [<ffffffff810880db>] debug_mutex_wake_waiter+0x3b/0x110
PGD 773d7067 PUD 7682c067 PMD 0
Oops: 0000 [#2] PREEMPT SMP
last sysfs file: /sys/bus/pci/drivers/bttv/uevent
CPU 1
Modules linked in: tuner_simple tuner_types tea5767 tda7432 bttv btcx_risc tveeprom tuner tvaudio jfs vboxnetflt vboxnetadp vboxdrv usbserial rtnet3070ap rt3070ap rtutil3070ap gspca_zc3xx gspca_main st iTCO_wdt iTCO_vendor_support asus_atk0110 nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack tun coretemp usbhid hid ide_cd_mod usb_storage loop rfcomm l2cap btusb bluetooth rfkill usblp fuse sr_mod uhci_hcd ehci_hcd usbcore bsd_comp sha1_generic arc4 ecb ppp_mppe ppp_synctty l2tp_ip l2tp_ppp pppox ppp_generic slhc l2tp_netlink l2tp_core atl1 mii ahci libahci snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_emu10k1 snd_util_mem snd_ac97_codec snd_rawmidi snd_hwdep snd_bt87x snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus shpchp pci_hotplug ir_lirc_codec lirc_dev videobuf_dma_sg ir_sony_decoder videobuf_core ir_jvc_decoder v4l2_common ir_rc6_decoder videodev v4l2_compat_ioctl32 ir_rc5_decoder v4l1_compat ir_nec_decoder ir_common ir_core serio_raw emu10k1_gp gameport psmouse evdev i2c_i801 firewire_ohci firewire_core crc_itu_t radeon ttm drm_kms_helper i2c_algo_bit drm i2c_core intel_agp intel_gtt cdrom thermal processor button rtc_cmos rtc_core rtc_lib reiserfs ext4 jbd2 crc16 ext3 mbcache jbd ata_generic ata_piix pata_acpi sd_mod pata_marvell libata scsi_mod ide_core
Pid: 1694, comm: v4l_id Tainted: G D W 2.6.37-rc5-custom #2 P5K SE/EPU/P5K SE/EPU
RIP: 0010:[<ffffffff810880db>] [<ffffffff810880db>] debug_mutex_wake_waiter+0x3b/0x110
RSP: 0018:ffff88007683db78 EFLAGS: 00010003
RAX: ffff880077fe6020 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff880077fe6018
RBP: ffff88007683db88 R08: 2222222222222222 R09: 2222222222222222
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880077fe6018
R13: 0000000000000000 R14: 0000000000000004 R15: ffff880077f767c0
FS: 00007f1c06dc3700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 000000007683b000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process v4l_id (pid: 1694, threadinfo ffff88007683c000, task ffff880079f9f5f0)
Stack:
ffff880077fe6018 0000000000000246 ffff88007683dbb8 ffffffff81387c5b
0000000000000004 ffff880077f76000 ffff880077fe6000 ffff880077fe6018
ffff88007683dbc8 ffffffff81387d09 ffff88007683dc38 ffffffffa0b8731b
Call Trace:
[<ffffffff81387c5b>] __mutex_unlock_slowpath+0x9b/0x140
[<ffffffff81387d09>] mutex_unlock+0x9/0x10
[<ffffffffa0b8731b>] bttv_open+0x12b/0x380 [bttv]
[<ffffffffa04366c9>] v4l2_open+0xd9/0x100 [videodev]
[<ffffffff81133267>] chrdev_open+0x127/0x270
[<ffffffff81133140>] ? chrdev_open+0x0/0x270
[<ffffffff8112d16d>] __dentry_open+0x11d/0x3c0
[<ffffffff811b2dd5>] ? devcgroup_inode_permission+0x125/0x150
[<ffffffff8112e3b1>] nameidata_to_filp+0x61/0x70
[<ffffffff8113ce00>] do_last+0x480/0x740
[<ffffffff8113d2ad>] do_filp_open+0x1ed/0x680
[<ffffffff81148a54>] ? alloc_fd+0xf4/0x150
[<ffffffff8112e423>] do_sys_open+0x63/0x110
[<ffffffff8112e4eb>] sys_open+0x1b/0x20
[<ffffffff8100bf12>] system_call_fastpath+0x16/0x1b
Code: 1c 24 4c 89 64 24 08 48 89 f3 49 89 fc 85 c9 75 25 8b 57 04 89 d0 c1 f8 08 31 d0 84 c0 74 5c 49 8d 44 24 08 49 39 44 24 08 74 33 <48> 3b 5b 18 75 10 48 3b 1b 74 62 48 8b 1c 24 4c 8b 64 24 08 c9
RIP [<ffffffff810880db>] debug_mutex_wake_waiter+0x3b/0x110
RSP <ffff88007683db78>
CR2: 0000000000000018
---[ end trace 791308412a1c347f ]---
