Re: [PATCH v6 2/4] media: uvcvideo: Refactor the status irq API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent

On Wed, 25 Sept 2024 at 21:15, Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Ricardo,
>
> Thank you for the patch.
>
> On Fri, Jun 14, 2024 at 12:41:28PM +0000, Ricardo Ribalda wrote:
> > There are two different use-cases of uvc_status():
>
> I'd add a blank line here, and remove the leading tabs from the next two
> lines.
>
> >       - adding/removing a user when the camera is open/closed
> >       - stopping/starting when the camera is suspended/resumed
> >
> > Make the API reflect these two use-cases and move all the refcounting
> > and locking logic to the uvc_status.c file.
>
> If my understanding is correct, this doesn't introduce any functional
> change, and is not a dependency of further patches in the series. I
> don't have a strong opinion on the refactoring itself, so I'm fine with
> it, but I'd like a mention in the commit message that no functional
> change is introduced.
>
> > Reviewed-by: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx>
> > Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> > ---
> >  drivers/media/usb/uvc/uvc_driver.c | 13 ++-------
> >  drivers/media/usb/uvc/uvc_status.c | 55 ++++++++++++++++++++++++++++++++++++--
> >  drivers/media/usb/uvc/uvc_v4l2.c   | 22 +++++----------
> >  drivers/media/usb/uvc/uvcvideo.h   | 10 ++++---
> >  4 files changed, 67 insertions(+), 33 deletions(-)
> >
> > diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> > index 55132688e363..c8c0352af1e5 100644
> > --- a/drivers/media/usb/uvc/uvc_driver.c
> > +++ b/drivers/media/usb/uvc/uvc_driver.c
> > @@ -2135,7 +2135,6 @@ static int uvc_probe(struct usb_interface *intf,
> >       INIT_LIST_HEAD(&dev->streams);
> >       kref_init(&dev->ref);
> >       atomic_set(&dev->nmappings, 0);
> > -     mutex_init(&dev->lock);
> >
> >       dev->udev = usb_get_dev(udev);
> >       dev->intf = usb_get_intf(intf);
> > @@ -2301,10 +2300,7 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message)
> >       /* Controls are cached on the fly so they don't need to be saved. */
> >       if (intf->cur_altsetting->desc.bInterfaceSubClass ==
> >           UVC_SC_VIDEOCONTROL) {
> > -             mutex_lock(&dev->lock);
> > -             if (dev->users)
> > -                     uvc_status_stop(dev);
> > -             mutex_unlock(&dev->lock);
> > +             uvc_status_suspend(dev);
> >               return 0;
> >       }
> >
> > @@ -2335,12 +2331,7 @@ static int __uvc_resume(struct usb_interface *intf, int reset)
> >                               return ret;
> >               }
> >
> > -             mutex_lock(&dev->lock);
> > -             if (dev->users)
> > -                     ret = uvc_status_start(dev, GFP_NOIO);
> > -             mutex_unlock(&dev->lock);
> > -
> > -             return ret;
> > +             return uvc_status_resume(dev);
> >       }
> >
> >       list_for_each_entry(stream, &dev->streams, list) {
> > diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
> > index a78a88c710e2..375a95dd3011 100644
> > --- a/drivers/media/usb/uvc/uvc_status.c
> > +++ b/drivers/media/usb/uvc/uvc_status.c
> > @@ -257,6 +257,8 @@ int uvc_status_init(struct uvc_device *dev)
> >       unsigned int pipe;
> >       int interval;
> >
> > +     mutex_init(&dev->status_lock);
> > +
> >       if (ep == NULL)
> >               return 0;
> >
> > @@ -302,18 +304,22 @@ void uvc_status_cleanup(struct uvc_device *dev)
> >       kfree(dev->status);
> >  }
> >
> > -int uvc_status_start(struct uvc_device *dev, gfp_t flags)
> > +static int __uvc_status_start(struct uvc_device *dev, gfp_t flags)
>
> Do we need a double underscore prefix here and for the stop() function ?
>
> >  {
> > +     lockdep_assert_held(&dev->status_lock);
> > +
> >       if (dev->int_urb == NULL)
> >               return 0;
> >
> >       return usb_submit_urb(dev->int_urb, flags);
> >  }
> >
> > -void uvc_status_stop(struct uvc_device *dev)
> > +static void __uvc_status_stop(struct uvc_device *dev)
> >  {
> >       struct uvc_ctrl_work *w = &dev->async_ctrl;
> >
> > +     lockdep_assert_held(&dev->status_lock);
> > +
> >       /*
> >        * Prevent the asynchronous control handler from requeing the URB. The
> >        * barrier is needed so the flush_status change is visible to other
> > @@ -350,3 +356,48 @@ void uvc_status_stop(struct uvc_device *dev)
> >        */
> >       smp_store_release(&dev->flush_status, false);
> >  }
> > +
> > +int uvc_status_resume(struct uvc_device *dev)
> > +{
> > +     int ret = 0;
> > +
> > +     mutex_lock(&dev->status_lock);
> > +     if (dev->status_users)
> > +             ret = __uvc_status_start(dev, GFP_NOIO);
> > +     mutex_unlock(&dev->status_lock);
> > +
> > +     return ret;
>
> Now that we have scoped guards, this can be written as
>
>         guard(mutex)(&dev->status_lock);
>
>         if (!dev->status_users)
>                 return 0;
>
>         return __uvc_status_start(dev, GFP_NOIO);
>
> > +}
> > +
> > +void uvc_status_suspend(struct uvc_device *dev)
> > +{
> > +     mutex_lock(&dev->status_lock);
> > +     if (dev->status_users)
> > +             __uvc_status_stop(dev);
> > +     mutex_unlock(&dev->status_lock);
>
>         guard(mutex)(&dev->status_lock);
>
>         if (dev->status_users)
>                 __uvc_status_stop(dev);
>
> Same below.
>
> > +}
> > +
> > +int uvc_status_get(struct uvc_device *dev)
> > +{
> > +     int ret = 0;
> > +
> > +     mutex_lock(&dev->status_lock);
> > +     if (!dev->status_users)
> > +             ret = __uvc_status_start(dev, GFP_KERNEL);
> > +     if (!ret)
> > +             dev->status_users++;
> > +     mutex_unlock(&dev->status_lock);
> > +
> > +     return ret;
> > +}
> > +
> > +void uvc_status_put(struct uvc_device *dev)
> > +{
> > +     mutex_lock(&dev->status_lock);
> > +     if (dev->status_users == 1)
> > +             __uvc_status_stop(dev);
> > +     WARN_ON(!dev->status_users);
>
> Is this needed, or could we keep the original code ?
>
>         if (--dev->status_users == 0)
>                 __uvc_status_stop(dev);

I'd prefer to keep the code. When I was playing with the granular PM
it was very nice to display a WARN and make sure that status_users was
never underflowed.


>
> All those comments are quite minor, the next version will have my R-b.
>
> > +     if (dev->status_users)
> > +             dev->status_users--;
> > +     mutex_unlock(&dev->status_lock);
> > +}
> > diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
> > index f4988f03640a..97c5407f6603 100644
> > --- a/drivers/media/usb/uvc/uvc_v4l2.c
> > +++ b/drivers/media/usb/uvc/uvc_v4l2.c
> > @@ -628,20 +628,13 @@ static int uvc_v4l2_open(struct file *file)
> >               return -ENOMEM;
> >       }
> >
> > -     mutex_lock(&stream->dev->lock);
> > -     if (stream->dev->users == 0) {
> > -             ret = uvc_status_start(stream->dev, GFP_KERNEL);
> > -             if (ret < 0) {
> > -                     mutex_unlock(&stream->dev->lock);
> > -                     usb_autopm_put_interface(stream->dev->intf);
> > -                     kfree(handle);
> > -                     return ret;
> > -             }
> > +     ret = uvc_status_get(stream->dev);
> > +     if (ret) {
> > +             usb_autopm_put_interface(stream->dev->intf);
> > +             kfree(handle);
> > +             return ret;
> >       }
> >
> > -     stream->dev->users++;
> > -     mutex_unlock(&stream->dev->lock);
> > -
> >       v4l2_fh_init(&handle->vfh, &stream->vdev);
> >       v4l2_fh_add(&handle->vfh);
> >       handle->chain = stream->chain;
> > @@ -670,10 +663,7 @@ static int uvc_v4l2_release(struct file *file)
> >       kfree(handle);
> >       file->private_data = NULL;
> >
> > -     mutex_lock(&stream->dev->lock);
> > -     if (--stream->dev->users == 0)
> > -             uvc_status_stop(stream->dev);
> > -     mutex_unlock(&stream->dev->lock);
> > +     uvc_status_put(stream->dev);
> >
> >       usb_autopm_put_interface(stream->dev->intf);
> >       return 0;
> > diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> > index 6fb0a78b1b00..00b600eb058c 100644
> > --- a/drivers/media/usb/uvc/uvcvideo.h
> > +++ b/drivers/media/usb/uvc/uvcvideo.h
> > @@ -555,8 +555,6 @@ struct uvc_device {
> >
> >       const struct uvc_device_info *info;
> >
> > -     struct mutex lock;              /* Protects users */
> > -     unsigned int users;
> >       atomic_t nmappings;
> >
> >       /* Video control interface */
> > @@ -578,6 +576,8 @@ struct uvc_device {
> >       struct usb_host_endpoint *int_ep;
> >       struct urb *int_urb;
> >       struct uvc_status *status;
> > +     struct mutex status_lock; /* Protects status_users */
> > +     unsigned int status_users;
> >       bool flush_status;
> >
> >       struct input_dev *input;
> > @@ -744,8 +744,10 @@ int uvc_register_video_device(struct uvc_device *dev,
> >  int uvc_status_init(struct uvc_device *dev);
> >  void uvc_status_unregister(struct uvc_device *dev);
> >  void uvc_status_cleanup(struct uvc_device *dev);
> > -int uvc_status_start(struct uvc_device *dev, gfp_t flags);
> > -void uvc_status_stop(struct uvc_device *dev);
> > +int uvc_status_resume(struct uvc_device *dev);
> > +void uvc_status_suspend(struct uvc_device *dev);
> > +int uvc_status_get(struct uvc_device *dev);
> > +void uvc_status_put(struct uvc_device *dev);
> >
> >  /* Controls */
> >  extern const struct uvc_control_mapping uvc_ctrl_power_line_mapping_limited;
>
> --
> Regards,
>
> Laurent Pinchart



-- 
Ricardo Ribalda




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux