Hi Ricardo, Thank you for the patch. On Fri, Jun 14, 2024 at 12:41:28PM +0000, Ricardo Ribalda wrote: > There are two different use-cases of uvc_status(): I'd add a blank line here, and remove the leading tabs from the next two lines. > - adding/removing a user when the camera is open/closed > - stopping/starting when the camera is suspended/resumed > > Make the API reflect these two use-cases and move all the refcounting > and locking logic to the uvc_status.c file. If my understanding is correct, this doesn't introduce any functional change, and is not a dependency of further patches in the series. I don't have a strong opinion on the refactoring itself, so I'm fine with it, but I'd like a mention in the commit message that no functional change is introduced. > Reviewed-by: Sergey Senozhatsky <senozhatsky@xxxxxxxxxxxx> > Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx> > --- > drivers/media/usb/uvc/uvc_driver.c | 13 ++------- > drivers/media/usb/uvc/uvc_status.c | 55 ++++++++++++++++++++++++++++++++++++-- > drivers/media/usb/uvc/uvc_v4l2.c | 22 +++++---------- > drivers/media/usb/uvc/uvcvideo.h | 10 ++++--- > 4 files changed, 67 insertions(+), 33 deletions(-) > > diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c > index 55132688e363..c8c0352af1e5 100644 > --- a/drivers/media/usb/uvc/uvc_driver.c > +++ b/drivers/media/usb/uvc/uvc_driver.c > @@ -2135,7 +2135,6 @@ static int uvc_probe(struct usb_interface *intf, > INIT_LIST_HEAD(&dev->streams); > kref_init(&dev->ref); > atomic_set(&dev->nmappings, 0); > - mutex_init(&dev->lock); > > dev->udev = usb_get_dev(udev); > dev->intf = usb_get_intf(intf); > @@ -2301,10 +2300,7 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message) > /* Controls are cached on the fly so they don't need to be saved. */ > if (intf->cur_altsetting->desc.bInterfaceSubClass == > UVC_SC_VIDEOCONTROL) { > - mutex_lock(&dev->lock); > - if (dev->users) > - uvc_status_stop(dev); > - mutex_unlock(&dev->lock); > + uvc_status_suspend(dev); > return 0; > } > > @@ -2335,12 +2331,7 @@ static int __uvc_resume(struct usb_interface *intf, int reset) > return ret; > } > > - mutex_lock(&dev->lock); > - if (dev->users) > - ret = uvc_status_start(dev, GFP_NOIO); > - mutex_unlock(&dev->lock); > - > - return ret; > + return uvc_status_resume(dev); > } > > list_for_each_entry(stream, &dev->streams, list) { > diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c > index a78a88c710e2..375a95dd3011 100644 > --- a/drivers/media/usb/uvc/uvc_status.c > +++ b/drivers/media/usb/uvc/uvc_status.c > @@ -257,6 +257,8 @@ int uvc_status_init(struct uvc_device *dev) > unsigned int pipe; > int interval; > > + mutex_init(&dev->status_lock); > + > if (ep == NULL) > return 0; > > @@ -302,18 +304,22 @@ void uvc_status_cleanup(struct uvc_device *dev) > kfree(dev->status); > } > > -int uvc_status_start(struct uvc_device *dev, gfp_t flags) > +static int __uvc_status_start(struct uvc_device *dev, gfp_t flags) Do we need a double underscore prefix here and for the stop() function ? > { > + lockdep_assert_held(&dev->status_lock); > + > if (dev->int_urb == NULL) > return 0; > > return usb_submit_urb(dev->int_urb, flags); > } > > -void uvc_status_stop(struct uvc_device *dev) > +static void __uvc_status_stop(struct uvc_device *dev) > { > struct uvc_ctrl_work *w = &dev->async_ctrl; > > + lockdep_assert_held(&dev->status_lock); > + > /* > * Prevent the asynchronous control handler from requeing the URB. The > * barrier is needed so the flush_status change is visible to other > @@ -350,3 +356,48 @@ void uvc_status_stop(struct uvc_device *dev) > */ > smp_store_release(&dev->flush_status, false); > } > + > +int uvc_status_resume(struct uvc_device *dev) > +{ > + int ret = 0; > + > + mutex_lock(&dev->status_lock); > + if (dev->status_users) > + ret = __uvc_status_start(dev, GFP_NOIO); > + mutex_unlock(&dev->status_lock); > + > + return ret; Now that we have scoped guards, this can be written as guard(mutex)(&dev->status_lock); if (!dev->status_users) return 0; return __uvc_status_start(dev, GFP_NOIO); > +} > + > +void uvc_status_suspend(struct uvc_device *dev) > +{ > + mutex_lock(&dev->status_lock); > + if (dev->status_users) > + __uvc_status_stop(dev); > + mutex_unlock(&dev->status_lock); guard(mutex)(&dev->status_lock); if (dev->status_users) __uvc_status_stop(dev); Same below. > +} > + > +int uvc_status_get(struct uvc_device *dev) > +{ > + int ret = 0; > + > + mutex_lock(&dev->status_lock); > + if (!dev->status_users) > + ret = __uvc_status_start(dev, GFP_KERNEL); > + if (!ret) > + dev->status_users++; > + mutex_unlock(&dev->status_lock); > + > + return ret; > +} > + > +void uvc_status_put(struct uvc_device *dev) > +{ > + mutex_lock(&dev->status_lock); > + if (dev->status_users == 1) > + __uvc_status_stop(dev); > + WARN_ON(!dev->status_users); Is this needed, or could we keep the original code ? if (--dev->status_users == 0) __uvc_status_stop(dev); All those comments are quite minor, the next version will have my R-b. > + if (dev->status_users) > + dev->status_users--; > + mutex_unlock(&dev->status_lock); > +} > diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c > index f4988f03640a..97c5407f6603 100644 > --- a/drivers/media/usb/uvc/uvc_v4l2.c > +++ b/drivers/media/usb/uvc/uvc_v4l2.c > @@ -628,20 +628,13 @@ static int uvc_v4l2_open(struct file *file) > return -ENOMEM; > } > > - mutex_lock(&stream->dev->lock); > - if (stream->dev->users == 0) { > - ret = uvc_status_start(stream->dev, GFP_KERNEL); > - if (ret < 0) { > - mutex_unlock(&stream->dev->lock); > - usb_autopm_put_interface(stream->dev->intf); > - kfree(handle); > - return ret; > - } > + ret = uvc_status_get(stream->dev); > + if (ret) { > + usb_autopm_put_interface(stream->dev->intf); > + kfree(handle); > + return ret; > } > > - stream->dev->users++; > - mutex_unlock(&stream->dev->lock); > - > v4l2_fh_init(&handle->vfh, &stream->vdev); > v4l2_fh_add(&handle->vfh); > handle->chain = stream->chain; > @@ -670,10 +663,7 @@ static int uvc_v4l2_release(struct file *file) > kfree(handle); > file->private_data = NULL; > > - mutex_lock(&stream->dev->lock); > - if (--stream->dev->users == 0) > - uvc_status_stop(stream->dev); > - mutex_unlock(&stream->dev->lock); > + uvc_status_put(stream->dev); > > usb_autopm_put_interface(stream->dev->intf); > return 0; > diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h > index 6fb0a78b1b00..00b600eb058c 100644 > --- a/drivers/media/usb/uvc/uvcvideo.h > +++ b/drivers/media/usb/uvc/uvcvideo.h > @@ -555,8 +555,6 @@ struct uvc_device { > > const struct uvc_device_info *info; > > - struct mutex lock; /* Protects users */ > - unsigned int users; > atomic_t nmappings; > > /* Video control interface */ > @@ -578,6 +576,8 @@ struct uvc_device { > struct usb_host_endpoint *int_ep; > struct urb *int_urb; > struct uvc_status *status; > + struct mutex status_lock; /* Protects status_users */ > + unsigned int status_users; > bool flush_status; > > struct input_dev *input; > @@ -744,8 +744,10 @@ int uvc_register_video_device(struct uvc_device *dev, > int uvc_status_init(struct uvc_device *dev); > void uvc_status_unregister(struct uvc_device *dev); > void uvc_status_cleanup(struct uvc_device *dev); > -int uvc_status_start(struct uvc_device *dev, gfp_t flags); > -void uvc_status_stop(struct uvc_device *dev); > +int uvc_status_resume(struct uvc_device *dev); > +void uvc_status_suspend(struct uvc_device *dev); > +int uvc_status_get(struct uvc_device *dev); > +void uvc_status_put(struct uvc_device *dev); > > /* Controls */ > extern const struct uvc_control_mapping uvc_ctrl_power_line_mapping_limited; -- Regards, Laurent Pinchart