Re: [PATCH v2 2/2] media: imx: vdic: Introduce mem2mem VDI deinterlacer driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/30/24 6:05 PM, Nicolas Dufresne wrote:

Hi,

sorry for the abysmal delay.

Le mercredi 24 juillet 2024 à 02:19 +0200, Marek Vasut a écrit :
Introduce dedicated memory-to-memory IPUv3 VDI deinterlacer driver.
Currently the IPUv3 can operate VDI in DIRECT mode, from sensor to
memory. This only works for single stream, that is, one input from
one camera is deinterlaced on the fly with a helper buffer in DRAM
and the result is written into memory.

The i.MX6Q/QP does support up to four analog cameras via two IPUv3
instances, each containing one VDI deinterlacer block. In order to
deinterlace all four streams from all four analog cameras live, it
is necessary to operate VDI in INDIRECT mode, where the interlaced
streams are written to buffers in memory, and then deinterlaced in
memory using VDI in INDIRECT memory-to-memory mode.

Just a quick design question. Is it possible to chain the deinterlacer and the
csc-scaler ?

I think you could do that.

If so, it would be much more efficient if all this could be
combined into the existing m2m driver, since you could save a memory rountrip
when needing to deinterlace, change the colorspace and possibly scale too.

The existing PRP/IC driver is similar to what this driver does, yes, but
it uses a different DMA path , I believe it is IDMAC->PRP->IC->IDMAC .
This driver uses IDMAC->VDI->IC->IDMAC . I am not convinced mixing the
two paths into a single driver would be beneficial, but I am reasonably
sure it would be very convoluted. Instead, this driver could be extended
to do deinterlacing and scaling using the IC if that was needed. I think
that would be the cleaner approach.

Not that I only meant to ask if there was a path to combine
CSC/Scaling/Deinterlacing without a memory rountrip. If a rountrip is needed
anyway, I would rather make separate video nodes, and leave it to userspace to
deal with. Though, if we can avoid it, a combined driver should be highly
beneficial.
The VDI mem2mem driver already uses the IC as an output path from the deinterlacer, IC is capable of scaling and it could be configured to do scaling. The IC configuration in the VDI mem2mem driver is some 10 lines of code (select input and output colorspace, and input and output image resolution), the rest of the VDI mem2mem driver is interaction with the VDI itself.

Since the IC configuration (i.e. color space conversion and scaling) is already well factored out, I think mixing the VDI and CSC drivers wouldn't bring any real benefit, it would only make the code more complicated.

[...]




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux