Re: [PATCH] arm64: dts: qcom: sa8775p-ride: add WiFi/BT nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 09, 2024 at 03:27:48PM GMT, Kalle Valo wrote:
> Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> writes:
> 
> > On Mon, 9 Sept 2024 at 14:31, Kalle Valo <kvalo@xxxxxxxxxx> wrote:
> >
> >>
> >> Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> writes:
> >>
> >> > On Fri, Sep 06, 2024 at 08:19:28AM GMT, Miaoqing Pan wrote:
> >> >
> >> >>
> >> >>
> >> >> On 9/5/2024 8:49 PM, Dmitry Baryshkov wrote:
> >> >> > On Thu, Sep 05, 2024 at 02:48:17PM GMT, Miaoqing Pan wrote:
> >> >> > > Add a node for the PMU module of the WCN6855 present on the sa8775p-ride
> >> >> > > board. Assign its LDO power outputs to the existing WiFi/Bluetooth module.
> >> >> > >
> >> >> > > Signed-off-by: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
> >> >> > > ---
> >> >> > >   arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 119 +++++++++++++++++++++
> >> >> > >   arch/arm64/boot/dts/qcom/sa8775p.dtsi      |   2 +-
> >> >> > >   2 files changed, 120 insertions(+), 1 deletion(-)
> >> >> > >
> >> >> > > @@ -837,3 +939,20 @@ &usb_2_hsphy {
> >> >> > >   &xo_board_clk {
> >> >> > >          clock-frequency = <38400000>;
> >> >> > >   };
> >> >> > > +
> >> >> > > +&pcieport0 {
> >> >> > > +        wifi@0 {
> >> >> > > +                compatible = "pci17cb,1101";
> >> >> > > +                reg = <0x10000 0x0 0x0 0x0 0x0>;
> >> >> > > +
> >> >> > > +                vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> >> >> > > +                vddaon-supply = <&vreg_pmu_aon_0p59>;
> >> >> > > +                vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> >> >> > > +                vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> >> >> > > +                vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> >> >> > > +                vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> >> >> > > +                vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
> >> >> > > +                vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> >> >> > > +                vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> >> >> >
> >> >> > Please add
> >> >> >
> >> >> > qcom,ath11k-calibration-variant = "name";
> >> >>
> >> >> No need, here the WiFi node is for 'drivers/pci/pwrctl', not ath11k driver.
> >> >
> >> > NAK, nodes describe hardware, not drivers. And we have had enough issues
> >> > with the WCN wifi having collisions on the board-id / chip-id / etc.
> >> >
> >> > Maybe we should make calibration-data required for the DT-based systems?
> >> > Kalle, WDYT?
> >>
> >> I don't know exactly what hardware you are referring so this is just a
> >> quick and vague answer, take all this as grain of salt.
> >>
> >> I don't have any numbers but I'm assuming most of the
> >> ath10k/ath11k/ath12k devices have the calibration data stored in OTP
> >> inside the chip. There are also devices which store the calibration
> >> outside the chip, for example in DT, but my understanding is that they
> >> are a minority.
> >
> > Please excuse me, the comment was about the
> > qcom,athNk-calibration-variant
> 
> Ah :) In case you were wondering, I was talking above about
> qcom,ath10k-calibration-data property which is the full calibration
> data, board files are not used at all in that case. So please ignore all
> that I said.
> 
> > the property used to identify the BDF within board-2.bin. Currently
> > it is optional, which leads to developers omitting it. I think it's
> > worth making it a required property for new DT devices, making sure
> > that we don't have an issue with the plenty of boards programmed to
> > use 0xff as the board_id. Or just using the same ID, but different BDF
> > files.
> 
> This is also a quick answer, the merge window is getting close and we
> are finalising the ath12k MLO support so not much free time right now.
> 
> Some chipsets do provide unique information for the ath10k/ath11k/ath12k
> driver to choose the correct board file, but I guess they are mostly
> mobile chipsets. Though not even all mobile chipsets provide that, as
> you are painfully aware. For AP chipsets it seems to be a rule that they
> don't provide unique information to choose the board file and a variant
> field is always needed. So I think there is a point in your proposal.

Ack, thanks :-)

> 
> Backward compatibility is important but I think we already handle that,
> at least in ath11k, as it's first try with variant field and then
> without variant. But this needs more investigation on both ath11k and
> ath12k. I hope for ath10k we would not need to touch the driver anymore.
> 
> Can we revisit this in few weeks, after MLO is in better shape, and
> maybe you could start a new thread?

Sure. Let's agree that I'll send a patch after -rc1, if I don't forget
about it.

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux