On Thu, Sep 05, 2024 at 02:48:17PM GMT, Miaoqing Pan wrote:
> Add a node for the PMU module of the WCN6855 present on the sa8775p-ride
> board. Assign its LDO power outputs to the existing WiFi/Bluetooth module.
>
> Signed-off-by: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 119 +++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 2 +-
> 2 files changed, 120 insertions(+), 1 deletion(-)
>
> @@ -837,3 +939,20 @@ &usb_2_hsphy {
> &xo_board_clk {
> clock-frequency = <38400000>;
> };
> +
> +&pcieport0 {
> + wifi@0 {
> + compatible = "pci17cb,1101";
> + reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> + vddaon-supply = <&vreg_pmu_aon_0p59>;
> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
> + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
Please add
qcom,ath11k-calibration-variant = "name";
> + };
> +};
--
With best wishes
Dmitry
