Factor out all the power off logic, except clk_disable_unprepare(), to a
new function __ov5645_set_power_off().
This allows ov5645_set_power_on() to excplicitly clean-out the clock
during the error-path.
The following smatch warning is fixed:
drivers/media/i2c/ov5645.c:690 ov5645_set_power_on() warn: 'ov5645->xclk' from clk_prepare_enable() not released on lines: 690.
Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
---
drivers/media/i2c/ov5645.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index 6c2d221f6973..0c32bd2940ec 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -635,7 +635,7 @@ static int ov5645_set_register_array(struct ov5645 *ov5645,
return 0;
}
-static int ov5645_set_power_off(struct device *dev)
+static void __ov5645_set_power_off(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct ov5645 *ov5645 = to_ov5645(sd);
@@ -643,8 +643,16 @@ static int ov5645_set_power_off(struct device *dev)
ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58);
gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
- clk_disable_unprepare(ov5645->xclk);
regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
+}
+
+static int ov5645_set_power_off(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ov5645 *ov5645 = to_ov5645(sd);
+
+ __ov5645_set_power_off(dev);
+ clk_disable_unprepare(ov5645->xclk);
return 0;
}
@@ -686,7 +694,8 @@ static int ov5645_set_power_on(struct device *dev)
return 0;
exit:
- ov5645_set_power_off(dev);
+ __ov5645_set_power_off(dev);
+ clk_disable_unprepare(ov5645->xclk);
return ret;
}
--
2.46.0.76.ge559c4bf1a-goog
