Factor out all the power off logic, except the clk_disable_unprepare(),
to a new function __ar0521_power_off().
This allows ar0521_power_on() to explicitly clean-out the clock during
the error-path.
The following smatch warning is fixed:
drivers/media/i2c/ar0521.c:912 ar0521_power_on() warn: 'sensor->extclk' from clk_prepare_enable() not released on lines: 912.
Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
---
drivers/media/i2c/ar0521.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c
index 09331cf95c62..2c528db31ba6 100644
--- a/drivers/media/i2c/ar0521.c
+++ b/drivers/media/i2c/ar0521.c
@@ -835,7 +835,7 @@ static const struct initial_reg {
be(0x0707)), /* 3F44: couple k factor 2 */
};
-static int ar0521_power_off(struct device *dev)
+static void __ar0521_power_off(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct ar0521_dev *sensor = to_ar0521_dev(sd);
@@ -850,6 +850,16 @@ static int ar0521_power_off(struct device *dev)
if (sensor->supplies[i])
regulator_disable(sensor->supplies[i]);
}
+}
+
+static int ar0521_power_off(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ar0521_dev *sensor = to_ar0521_dev(sd);
+
+ clk_disable_unprepare(sensor->extclk);
+ __ar0521_power_off(dev);
+
return 0;
}
@@ -908,7 +918,8 @@ static int ar0521_power_on(struct device *dev)
return 0;
off:
- ar0521_power_off(dev);
+ clk_disable_unprepare(sensor->extclk);
+ __ar0521_power_off(dev);
return ret;
}
--
2.46.0.76.ge559c4bf1a-goog
