Quoting Sakari Ailus (2024-07-29 09:54:01)
> Hi Umang,
>
> On Mon, Jul 29, 2024 at 02:19:32PM +0530, Umang Jain wrote:
> > Hi Sakari
> >
> > On 29/07/24 1:11 pm, Sakari Ailus wrote:
> > > Hi Umang,
> > >
> > > Thanks for the patch.
> > >
> > > On Mon, Jul 29, 2024 at 11:35:35AM +0530, Umang Jain wrote:
> > > > The imx335 reset-gpio is initialised with GPIO_OUT_LOW during probe.
> > > Should it be initialised to high instead, to enable reset?
> >
> > This initialization matches the physical line status, which is low in this
> > case.
>
> Documentation/driver-api/gpio/consumer.rst:
>
> * GPIOD_OUT_LOW to initialize the GPIO as output with a value of 0.
>
> ...
>
> Note that the initial value is *logical* and the physical line
> level depends on whether the line is configured active high or
> active low (see :ref:`active_low_semantics`).
>
Yes, I think this patch should also update/fix the call in
imx335_parse_hw_config()
/* Request optional reset pin */
imx335->reset_gpio = devm_gpiod_get_optional(imx335->dev, "reset",
- GPIOD_OUT_LOW);
+ GPIOD_OUT_HIGH);
To make sure it starts off in reset until it's set accordingly in
imx335_power_{on,off}()
--
Kieran
> --
> Sakari Ailus
