Hi, may I please have your help with the following: I have adapted the MT9T001 driver from Laurent's tree at http://git.linuxtv.org/pinchartl/media.git?a=shortlog;h=refs/heads/media-mt9t001 to the current state of the media-framework in this kernel tree (devel branch): http://meego.gitorious.org/maemo-multimedia/omap3isp-rx51 to run this on a gumstix overo (OMAP3) board. (Duplicating Bastian's recent work, I know, but he's on hoilday...). The mt9t001 driver module loads and probes ok, however, the creation of a v4l2 subdev for the sensor fails (i2c says -EBUSY, see below). It seems to choke on the fact that the sensor's I2C address of 0x5D is already in use after loading the mt9t001 module, which I think is fine: root@overo:~# modprobe iommu2 omap-iommu omap-iommu.0: isp registered root@overo:~# modprobe omap3-isp Linux media interface: v0.10 Linux video capture interface: v2.00 omap3isp omap3isp: Revision 2.0 found omap-iommu omap-iommu.0: isp: version 1.1 isp_register_subdev_group: i2c_adapter_id 3, type mt9t001, i2c_addr 93 mt9t001 3-005d: mt9t001_probe() mt9t001 3-005d: mt9t001_video_probe() mt9t001 3-005d: MT9T001 detected v4l2_i2c_new_subdev_board: info->addr=0x5d, probe_addrs=(null) i2c i2c-3: Failed to register i2c client mt9t001 at 0x5d (-16) isp_register_subdev_group: Unable to register subdev mt9t001 This creates these subdevs: root@overo:~# cat /sys/class/video4linux/v4l-subdev*/name OMAP3 ISP CCP2 OMAP3 ISP CSI2a OMAP3 ISP CCDC OMAP3 ISP preview OMAP3 ISP resizer OMAP3 ISP AEWB OMAP3 ISP AF OMAP3 ISP histogram which has the sensor missing, I believe. I am using platform_device_register() in my arch/arm/mach-omap2/board-overo.c file to register my iof_isp_platform_data as follows: static struct i2c_board_info overo_i2c_boardinfo_3[] = { { I2C_BOARD_INFO("mt9t001", 0x5d), }, }; static struct v4l2_subdev_i2c_board_info iof_camera_mt9t001[] = { { .board_info = &overo_i2c_boardinfo_3[0], .i2c_adapter_id = 3, }, { NULL, 0, }, }; static struct isp_v4l2_subdevs_group iof_camera_subdevs[] = { { .subdevs = iof_camera_mt9t001, .interface = ISP_INTERFACE_PARALLEL, .bus = { .parallel = { .data_lane_shift = 0, .clk_pol = 1, .bridge = ISPCTRL_PAR_BRIDGE_DISABLE, } }, }, { NULL, 0, }, }; static struct isp_platform_data iof_isp_platform_data = { .subdevs = iof_camera_subdevs, }; I have followed the recent conversation between Bastian, Laurent and others on the similar subject of a mt9p031 driver used with omap3-isp. Any pointers on what to check are greatly appreciated. Thank you, Stefan. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html