In commit 81495a59baeb ("media: imx335: Fix active area height discrepency")
the height for the mode struct was rectified to '1944'. However, the
name of mode struct is still reflecting to '1940'. Update it.
Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx335.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index 990d74214cc2..6c1e61b6696b 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -252,7 +252,7 @@ static const int imx335_tpg_val[] = {
};
/* Sensor mode registers */
-static const struct cci_reg_sequence mode_2592x1940_regs[] = {
+static const struct cci_reg_sequence mode_2592x1944_regs[] = {
{ IMX335_REG_MODE_SELECT, IMX335_MODE_STANDBY },
{ IMX335_REG_MASTER_MODE, 0x00 },
{ IMX335_REG_WINMODE, 0x04 },
@@ -416,8 +416,8 @@ static const struct imx335_mode supported_mode = {
.vblank_max = 133060,
.pclk = 396000000,
.reg_list = {
- .num_of_regs = ARRAY_SIZE(mode_2592x1940_regs),
- .regs = mode_2592x1940_regs,
+ .num_of_regs = ARRAY_SIZE(mode_2592x1944_regs),
+ .regs = mode_2592x1944_regs,
},
};
--
2.45.0
