Re: [PATCH v5 10/16] media: platform: Add mali-c55 3a stats devnode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent

On 29/06/2024 16:04, Laurent Pinchart wrote:
Hi Dan,

On Thu, Jun 20, 2024 at 04:10:01PM +0100, Daniel Scally wrote:
On 16/06/2024 22:19, Laurent Pinchart wrote:
On Wed, May 29, 2024 at 04:28:52PM +0100, Daniel Scally wrote:
Add a new code file to govern the 3a statistics capture node.

Acked-by: Nayden Kanchev  <nayden.kanchev@xxxxxxx>
Co-developed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
Signed-off-by: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
---
Changes in v5:

	- New patch

   drivers/media/platform/arm/mali-c55/Makefile  |   3 +-
   .../platform/arm/mali-c55/mali-c55-common.h   |  28 ++
   .../platform/arm/mali-c55/mali-c55-core.c     |  15 +
   .../platform/arm/mali-c55/mali-c55-isp.c      |   1 +
   .../arm/mali-c55/mali-c55-registers.h         |   3 +
   .../platform/arm/mali-c55/mali-c55-stats.c    | 350 ++++++++++++++++++
   6 files changed, 399 insertions(+), 1 deletion(-)
   create mode 100644 drivers/media/platform/arm/mali-c55/mali-c55-stats.c

diff --git a/drivers/media/platform/arm/mali-c55/Makefile b/drivers/media/platform/arm/mali-c55/Makefile
index 77dcb2fbf0f4..cd5a64bf0c62 100644
--- a/drivers/media/platform/arm/mali-c55/Makefile
+++ b/drivers/media/platform/arm/mali-c55/Makefile
@@ -4,6 +4,7 @@ mali-c55-y := mali-c55-capture.o \
   	      mali-c55-core.o \
   	      mali-c55-isp.o \
   	      mali-c55-tpg.o \
-	      mali-c55-resizer.o
+	      mali-c55-resizer.o \
+	      mali-c55-stats.o
obj-$(CONFIG_VIDEO_MALI_C55) += mali-c55.o
diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-common.h b/drivers/media/platform/arm/mali-c55/mali-c55-common.h
index 2d0c4d152beb..44119e04009b 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-common.h
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-common.h
@@ -79,6 +79,7 @@ enum mali_c55_isp_pads {
   	MALI_C55_ISP_PAD_SINK_VIDEO,
   	MALI_C55_ISP_PAD_SOURCE,
   	MALI_C55_ISP_PAD_SOURCE_BYPASS,
+	MALI_C55_ISP_PAD_SOURCE_3A,
Functions and structures are named with a "stats" suffix, let's call
this MALI_C55_ISP_PAD_SOURCE_STATS.

   	MALI_C55_ISP_NUM_PADS,
   };
@@ -194,6 +195,28 @@ struct mali_c55_cap_dev {
   	bool streaming;
   };
+struct mali_c55_stats_buf {
+	struct vb2_v4l2_buffer vb;
+	spinlock_t lock;
All locks require a comment to document what they protect. Same below.

+	unsigned int segments_remaining;
+	struct list_head queue;
+	bool failed;
+};
+
+struct mali_c55_stats {
+	struct mali_c55 *mali_c55;
+	struct video_device vdev;
+	struct dma_chan *channel;
+	struct vb2_queue queue;
+	struct media_pad pad;
+	struct mutex lock;
+
+	struct {
+		spinlock_t lock;
+		struct list_head queue;
+	} buffers;
+};
+
   enum mali_c55_config_spaces {
   	MALI_C55_CONFIG_PING,
   	MALI_C55_CONFIG_PONG,
@@ -224,6 +247,7 @@ struct mali_c55 {
   	struct mali_c55_isp isp;
   	struct mali_c55_resizer resizers[MALI_C55_NUM_RZRS];
   	struct mali_c55_cap_dev cap_devs[MALI_C55_NUM_CAP_DEVS];
+	struct mali_c55_stats stats;
struct list_head contexts;
   	enum mali_c55_config_spaces next_config;
@@ -245,6 +269,8 @@ int mali_c55_register_resizers(struct mali_c55 *mali_c55);
   void mali_c55_unregister_resizers(struct mali_c55 *mali_c55);
   int mali_c55_register_capture_devs(struct mali_c55 *mali_c55);
   void mali_c55_unregister_capture_devs(struct mali_c55 *mali_c55);
+int mali_c55_register_stats(struct mali_c55 *mali_c55);
+void mali_c55_unregister_stats(struct mali_c55 *mali_c55);
   struct mali_c55_ctx *mali_c55_get_active_context(struct mali_c55 *mali_c55);
   void mali_c55_set_plane_done(struct mali_c55_cap_dev *cap_dev,
   			     enum mali_c55_planes plane);
@@ -262,5 +288,7 @@ mali_c55_isp_fmt_next(const struct mali_c55_isp_fmt *fmt);
   bool mali_c55_isp_is_format_supported(unsigned int mbus_code);
   #define for_each_mali_isp_fmt(fmt)\
   	for ((fmt) = NULL; ((fmt) = mali_c55_isp_fmt_next((fmt)));)
+void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55,
+				enum mali_c55_config_spaces cfg_space);
#endif /* _MALI_C55_COMMON_H */
diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
index 50caf5ee7474..9ea70010876c 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
@@ -337,6 +337,16 @@ static int mali_c55_create_links(struct mali_c55 *mali_c55)
   		}
   	}
+ ret = media_create_pad_link(&mali_c55->isp.sd.entity,
+			MALI_C55_ISP_PAD_SOURCE_3A,
+			&mali_c55->stats.vdev.entity, 0,
+			MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE);
+	if (ret) {
+		dev_err(mali_c55->dev,
+			"failed to link ISP and 3a stats node\n");
s/3a stats/stats/

+		goto err_remove_links;
+	}
+
   	return 0;
err_remove_links:
@@ -350,6 +360,7 @@ static void mali_c55_unregister_entities(struct mali_c55 *mali_c55)
   	mali_c55_unregister_isp(mali_c55);
   	mali_c55_unregister_resizers(mali_c55);
   	mali_c55_unregister_capture_devs(mali_c55);
+	mali_c55_unregister_stats(mali_c55);
   }
static int mali_c55_register_entities(struct mali_c55 *mali_c55)
@@ -372,6 +383,10 @@ static int mali_c55_register_entities(struct mali_c55 *mali_c55)
   	if (ret)
   		goto err_unregister_entities;
+ ret = mali_c55_register_stats(mali_c55);
+	if (ret)
+		goto err_unregister_entities;
+
   	ret = mali_c55_create_links(mali_c55);
   	if (ret)
   		goto err_unregister_entities;
diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c
index ea8b7b866e7a..94876fba3353 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-isp.c
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-isp.c
@@ -564,6 +564,7 @@ int mali_c55_register_isp(struct mali_c55 *mali_c55)
   	isp->pads[MALI_C55_ISP_PAD_SINK_VIDEO].flags = MEDIA_PAD_FL_SINK;
   	isp->pads[MALI_C55_ISP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
   	isp->pads[MALI_C55_ISP_PAD_SOURCE_BYPASS].flags = MEDIA_PAD_FL_SOURCE;
+	isp->pads[MALI_C55_ISP_PAD_SOURCE_3A].flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&sd->entity, MALI_C55_ISP_NUM_PADS,
   				     isp->pads);
diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h
index cb27abde2aa5..eb3719245ec3 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h
@@ -68,6 +68,9 @@
   #define MALI_C55_VC_START(v)				((v) & 0xffff)
   #define MALI_C55_VC_SIZE(v)				(((v) & 0xffff) << 16)
+#define MALI_C55_REG_1024BIN_HIST 0x054a8
+#define MALI_C55_1024BIN_HIST_SIZE			4096
+
   /* Ping/Pong Configuration Space */
   #define MALI_C55_REG_BASE_ADDR				0x18e88
   #define MALI_C55_REG_BYPASS_0				0x18eac
diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-stats.c b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c
new file mode 100644
index 000000000000..aa40480ed814
--- /dev/null
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-stats.c
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Mali-C55 ISP Driver - 3A Statistics capture device
+ *
+ * Copyright (C) 2023 Ideas on Board Oy
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/media/arm/mali-c55-config.h>
+#include <linux/spinlock.h>
You're missing some headers here, for

container_of()
dev_err()
list_*()
mutex_init()
strscpy()
strscpy()

+
+#include <media/media-entity.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "mali-c55-common.h"
+#include "mali-c55-registers.h"
+
+static unsigned int metering_space_addrs[] = {
const

+	[MALI_C55_CONFIG_PING] = 0x095AC,
+	[MALI_C55_CONFIG_PONG] = 0x2156C,
Lower-case hex constants.

+};
+
+static int mali_c55_stats_enum_fmt_meta_cap(struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f)
+{
+	if (f->index || f->type != V4L2_BUF_TYPE_META_CAPTURE)
+		return -EINVAL;
+
+	f->pixelformat = V4L2_META_FMT_MALI_C55_3A_STATS;
The format could be called V4L2_META_FMT_MALI_C55_STATS. While most
statistics are related to one of the 3A algorithms, I think it would be
better to name this generically. It's name bikeshedding only of course.

+
+	return 0;
+}
+
+static int mali_c55_stats_g_fmt_meta_cap(struct file *file, void *fh,
+					 struct v4l2_format *f)
+{
+	static const struct v4l2_meta_format mfmt = {
+		.dataformat = V4L2_META_FMT_MALI_C55_3A_STATS,
+		.buffersize = sizeof(struct mali_c55_stats_buffer)
+	};
+
+	if (f->type != V4L2_BUF_TYPE_META_CAPTURE)
+		return -EINVAL;
+
+	f->fmt.meta = mfmt;
+
+	return 0;
+}
+
+static int mali_c55_stats_querycap(struct file *file,
+				   void *priv, struct v4l2_capability *cap)
+{
+	strscpy(cap->driver, MALI_C55_DRIVER_NAME, sizeof(cap->driver));
+	strscpy(cap->card, "ARM Mali-C55 ISP", sizeof(cap->card));
+
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops mali_c55_stats_v4l2_ioctl_ops = {
+	.vidioc_reqbufs = vb2_ioctl_reqbufs,
+	.vidioc_querybuf = vb2_ioctl_querybuf,
+	.vidioc_create_bufs = vb2_ioctl_create_bufs,
+	.vidioc_qbuf = vb2_ioctl_qbuf,
+	.vidioc_expbuf = vb2_ioctl_expbuf,
+	.vidioc_dqbuf = vb2_ioctl_dqbuf,
+	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+	.vidioc_streamon = vb2_ioctl_streamon,
+	.vidioc_streamoff = vb2_ioctl_streamoff,
+	.vidioc_enum_fmt_meta_cap = mali_c55_stats_enum_fmt_meta_cap,
+	.vidioc_g_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap,
+	.vidioc_s_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap,
+	.vidioc_try_fmt_meta_cap = mali_c55_stats_g_fmt_meta_cap,
+	.vidioc_querycap = mali_c55_stats_querycap,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static const struct v4l2_file_operations mali_c55_stats_v4l2_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = video_ioctl2,
+	.open = v4l2_fh_open,
+	.release = vb2_fop_release,
+	.poll = vb2_fop_poll,
+	.mmap = vb2_fop_mmap,
+};
+
+static int
+mali_c55_stats_queue_setup(struct vb2_queue *q, unsigned int *num_buffers,
+			   unsigned int *num_planes, unsigned int sizes[],
+			   struct device *alloc_devs[])
+{
+	struct mali_c55_stats *stats = vb2_get_drv_priv(q);
+
+	if (*num_planes && *num_planes > 1)
+		return -EINVAL;
+
+	if (sizes[0] && sizes[0] != sizeof(struct mali_c55_stats_buffer))
+		return -EINVAL;
+
+	*num_planes = 1;
+	sizes[0] = sizeof(struct mali_c55_stats_buffer);
+
+	if (stats->channel)
+		alloc_devs[0] = stats->channel->device->dev;
+
+	return 0;
+}
+
+static void mali_c55_stats_buf_queue(struct vb2_buffer *vb)
+{
+	struct mali_c55_stats *stats = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct mali_c55_stats_buf *buf = container_of(vbuf,
+						struct mali_c55_stats_buf, vb);
+
+	vb2_set_plane_payload(vb, 0, sizeof(struct mali_c55_stats_buffer));
+	buf->segments_remaining = 2;
+	buf->failed = false;
+
+	spin_lock(&stats->buffers.lock);
Isn't the DMA completion handler run from IRQ context ? If so you'll
need to use spin_lock_irq() here and in the other function that are
not called with interrupts disabled.
They're run in the bottom half of the interrupt handler; I'm under the
impression that that means the interrupts aren't disabled, and it's
safe to do...is that mistaken?
I'm talking about the DMA completion handler, called by the DMA engine
subsystem, not the IRQs of the C55 itself.


Ah! I follow you now sorry. Hm, that's an interesting thought...I think for the PL330 the answer is no; the interrupt handler wakes a thread that runs the callbacks for any DMA transfers that are completed...I don't know that that's a design rule we can rely on though so possibly it's better to be safe. Is there a disadvantage to using spin_lock_irq() outside of IRQ context?


+	list_add_tail(&buf->queue, &stats->buffers.queue);
+	spin_unlock(&stats->buffers.lock);
+}
+
+static void mali_c55_stats_stop_streaming(struct vb2_queue *q)
+{
+	struct mali_c55_stats *stats = vb2_get_drv_priv(q);
+	struct mali_c55_stats_buf *buf, *tmp;
+
+	spin_lock(&stats->buffers.lock);
+
+	list_for_each_entry_safe(buf, tmp, &stats->buffers.queue, queue) {
+		list_del(&buf->queue);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+
+	spin_unlock(&stats->buffers.lock);
+}
+
+static const struct vb2_ops mali_c55_stats_vb2_ops = {
+	.queue_setup = mali_c55_stats_queue_setup,
+	.buf_queue = mali_c55_stats_buf_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.stop_streaming = mali_c55_stats_stop_streaming,
+};
+
+static void
+mali_c55_stats_metering_complete(void *param,
+				 const struct dmaengine_result *result)
+{
+	struct mali_c55_stats_buf *buf = param;
+
+	spin_lock(&buf->lock);
I wonder if this is needed. Can the DMA engine call the completion
handlers of two sequential DMA transfers in parallel ?
The DMA engine that's on the system we have can't...I wasn't sure
whether that was generically true.
I think it is, but please double-check.

+
+	if (buf->failed)
+		goto out_unlock;
+
+	buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns();
+
+	if (result->result != DMA_TRANS_NOERROR) {
+		buf->failed = true;
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
This will possibly return the buffer to userspace after the first DMA
transfer. Userspace could then requeue the buffer to the kernel before
the completion of the second DMA transfer. That will cause trouble. I
think you should instead do something like

	spin_lock(&buf->lock);

	if (result->result != DMA_TRANS_NOERROR)
		buf->failed = true;

	if (!--buf->segments_remaining) {
		buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns();
		vb2_buffer_done(&buf->vb.vb2_buf, buf->failed ?
				VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
	}

	spin_unlock(&buf->lock);

The

	buf->vb.vb2_buf.timestamp = ktime_get_boottime_ns();

line could also be moved to mali_c55_stats_fill_buffer(), which would
make sure the timestamp is filled in case of DMA submission failures.
Okedokey

+		goto out_unlock;
+	}
+
+	if (!--buf->segments_remaining)
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+
+out_unlock:
+	spin_unlock(&buf->lock);
+}
+
+static int mali_c55_stats_dma_xfer(struct mali_c55_stats *stats, dma_addr_t src,
+				   dma_addr_t dst,
+				   struct mali_c55_stats_buf *buf,
+				   size_t length,
+				   void (*callback)(void *, const struct dmaengine_result *result))
The same callback is used for both invocations of this function, you can
drop the parameter and hardcode it below.
Yeah, not even sure now why I had a parameter.

+{
+	struct dma_async_tx_descriptor *tx;
+	dma_cookie_t cookie;
+
+	tx = dmaengine_prep_dma_memcpy(stats->channel, dst, src, length, 0);
+	if (!tx) {
+		dev_err(stats->mali_c55->dev, "failed to prep stats DMA\n");
+		return -EIO;
+	}
+
+	tx->callback_result = callback;
+	tx->callback_param = buf;
+
+	cookie = dmaengine_submit(tx);
+	if (dma_submit_error(cookie)) {
+		dev_err(stats->mali_c55->dev, "failed to submit stats DMA\n");
+		return -EIO;
+	}
+
+	dma_async_issue_pending(stats->channel);
+	return 0;
+}
+
+void mali_c55_stats_fill_buffer(struct mali_c55 *mali_c55,
+				enum mali_c55_config_spaces cfg_space)
+{
+	struct mali_c55_ctx *ctx = mali_c55_get_active_context(mali_c55);
+	struct mali_c55_stats *stats = &mali_c55->stats;
+	struct mali_c55_stats_buf *buf = NULL;
+	dma_addr_t src, dst;
+	int ret;
+
+	spin_lock(&stats->buffers.lock);
+	if (!list_empty(&stats->buffers.queue)) {
+		buf = list_first_entry(&stats->buffers.queue,
+				       struct mali_c55_stats_buf, queue);
+		list_del(&buf->queue);
+	}
+	spin_unlock(&stats->buffers.lock);
+
+	if (!buf)
+		return;
+
+	buf->vb.sequence = mali_c55->isp.frame_sequence;
+
+	/*
+	 * There are infact two noncontiguous sections of the ISP's
s/infact/in fact/

+	 * memory space that hold statistics for 3a algorithms to use. A
s/use. A/use: a/

+	 * section in each config space and a global section holding
+	 * histograms which is double buffered and so holds data for the
+	 * last frame. We need to read both.
+	 */
+	src = ctx->base + MALI_C55_REG_1024BIN_HIST;
+	dst = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
+
+	ret = mali_c55_stats_dma_xfer(stats, src, dst, buf,
+				      MALI_C55_1024BIN_HIST_SIZE,
+				      mali_c55_stats_metering_complete);
+	if (ret)
+		goto err_fail_buffer;
+
+	src = ctx->base + metering_space_addrs[cfg_space];
+	dst += MALI_C55_1024BIN_HIST_SIZE;
+
+	ret = mali_c55_stats_dma_xfer(
+		stats, src, dst, buf,
+		sizeof(struct mali_c55_stats_buffer) - MALI_C55_1024BIN_HIST_SIZE,
+		mali_c55_stats_metering_complete);
+	if (ret) {
+		dmaengine_terminate_sync(stats->channel);
+		goto err_fail_buffer;
+	}
I think you will need to terminate DMA transfers at stream off time.

+
+	return;
+
+err_fail_buffer:
+	vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+}
+
+void mali_c55_unregister_stats(struct mali_c55 *mali_c55)
+{
+	struct mali_c55_stats *stats = &mali_c55->stats;
+
+	if (!video_is_registered(&stats->vdev))
+		return;
+
+	vb2_video_unregister_device(&stats->vdev);
+	media_entity_cleanup(&stats->vdev.entity);
+	dma_release_channel(stats->channel);
+	mutex_destroy(&stats->lock);
+}
+
+int mali_c55_register_stats(struct mali_c55 *mali_c55)
+{
+	struct mali_c55_stats *stats = &mali_c55->stats;
+	struct video_device *vdev = &stats->vdev;
+	struct vb2_queue *vb2q = &stats->queue;
+	dma_cap_mask_t mask;
+	int ret;
+
+	mutex_init(&stats->lock);
+	INIT_LIST_HEAD(&stats->buffers.queue);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_MEMCPY, mask);
+
+	stats->channel = dma_request_channel(mask, 0, NULL);
Do we need a CPU fallback in case no DMA is available ?
Yes, actually.

I'm still very curious to know how long it takes to perform the DMA
transfer, compared to copying the data with the CPU, and especially
compared to the frame duration.
On my list of things to test and report :)
Looking forward to it :-)

+	if (!stats->channel) {
+		ret = -ENODEV;
+		goto err_destroy_mutex;
+	}
+
+	stats->pad.flags = MEDIA_PAD_FL_SINK;
+	ret = media_entity_pads_init(&stats->vdev.entity, 1, &stats->pad);
+	if (ret)
+		goto err_release_dma_channel;
+
+	vb2q->type = V4L2_BUF_TYPE_META_CAPTURE;
+	vb2q->io_modes = VB2_MMAP | VB2_DMABUF;
+	vb2q->drv_priv = stats;
+	vb2q->mem_ops = &vb2_dma_contig_memops;
+	vb2q->ops = &mali_c55_stats_vb2_ops;
+	vb2q->buf_struct_size = sizeof(struct mali_c55_stats_buf);
+	vb2q->min_queued_buffers = 1;
+	vb2q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	vb2q->lock = &stats->lock;
+	vb2q->dev = mali_c55->dev;
That's not the right device. The device that performs the DMA operation
is the DMA engine, and that's what you need to pass to vb2. Otherwise
the DMA address returned by vb2_dma_contig_plane_dma_addr() will be
mapped to the ISP device, not the DMA engine. In practice, if neither
are behind an IOMMU, things will likely work, but when that's not the
case, run into problems.

+
+	ret = vb2_queue_init(vb2q);
+	if (ret) {
+		dev_err(mali_c55->dev, "stats vb2 queue init failed\n");
+		goto err_cleanup_entity;
+	}
+
+	strscpy(stats->vdev.name, "mali-c55 3a stats", sizeof(stats->vdev.name));
s/3a //

+	vdev->release = video_device_release_empty;
That's never right. You should refcount the data structures to ensure
proper lifetime management.

+	vdev->fops = &mali_c55_stats_v4l2_fops;
+	vdev->ioctl_ops = &mali_c55_stats_v4l2_ioctl_ops;
+	vdev->lock = &stats->lock;
+	vdev->v4l2_dev = &mali_c55->v4l2_dev;
+	vdev->queue = &stats->queue;
+	vdev->device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING;
+	vdev->vfl_dir = VFL_DIR_RX;
+	video_set_drvdata(vdev, stats);
+
+	ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
+	if (ret) {
+		dev_err(mali_c55->dev,
+			"failed to register stats video device\n");
+		goto err_release_vb2q;
+	}
+
+	stats->mali_c55 = mali_c55;
+
+	return 0;
+
+err_release_vb2q:
+	vb2_queue_release(vb2q);
+err_cleanup_entity:
+	media_entity_cleanup(&stats->vdev.entity);
+err_release_dma_channel:
+	dma_release_channel(stats->channel);
+err_destroy_mutex:
+	mutex_destroy(&stats->lock);
+
+	return ret;
+}




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux