Hi Laurent
On Mon, 1 Jul 2024 at 14:57, Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hello Dongcheng,
>
> On Mon, Jul 01, 2024 at 07:53:28AM +0000, Yan, Dongcheng wrote:
> > Hi Larent,
> >
> > Sorry for that I didn't check my sent items in time, a bug of outlook
> > causes all commets after first quote to be lost. I have edited again
> > and sorry for the delay.
>
> No worries. I'm sorry that you have to use outlook :-)
>
> > Thanks for your review and meaningful suggestions. I have contacted
> > the vendor and optimized the code related to the register settings.
> > The response is as follows:
> >
> > On Friday, June 14, 2024 10:25 PM, Laurent Pinchart wrote:
> > >
> > > Hi Dongcheng,
> > >
> > > Thank you for the patch.
> > >
> > > On Fri, Jun 14, 2024 at 04:09:41PM +0800, Dongcheng Yan wrote:
> > > > The driver is implemented with V4L2 framework, and supports following
> > > > features:
> > > >
> > > > - manual exposure and analog/digital gain control
> > > > - vblank/hblank control
> > > > - vflip/hflip control
> > > > - runtime PM support
> > > > - 1280x960 at 30FPS
> > > >
> > > > Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
> > > > Signed-off-by: Dongcheng Yan <dongcheng.yan@xxxxxxxxx>
> > > > ---
> > > > v2 --> v3:
> > > > - remove unused reg setting
> > > > - add vflip/hflip control
> > > > - add external clock check & lanes check
> > > >
> > > > ---
> > > > drivers/media/i2c/Kconfig | 11 +
> > > > drivers/media/i2c/Makefile | 1 +
> > > > drivers/media/i2c/ar0234.c | 1077 ++++++++++++++++++++++++++++++++++++
> > > > 3 files changed, 1089 insertions(+)
> > > > create mode 100644 drivers/media/i2c/ar0234.c
> > > >
> > > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > > > index c6d3ee472d81..7108d194c975 100644
> > > > --- a/drivers/media/i2c/Kconfig
> > > > +++ b/drivers/media/i2c/Kconfig
> > > > @@ -51,6 +51,17 @@ config VIDEO_ALVIUM_CSI2
> > > > To compile this driver as a module, choose M here: the
> > > > module will be called alvium-csi2.
> > > >
> > > > +config VIDEO_AR0234
> > > > + tristate "ON Semiconductor AR0234 sensor support"
> > > > + depends on ACPI || COMPILE_TEST
> > > > + select V4L2_CCI_I2C
> > > > + help
> > > > + This is a Video4Linux2 sensor driver for the ON Semiconductor
> > > > + AR0234 camera.
> > > > +
> > > > + To compile this driver as a module, choose M here: the
> > > > + module will be called ar0234.
> > > > +
> > > > config VIDEO_AR0521
> > > > tristate "ON Semiconductor AR0521 sensor support"
> > > > help
> > > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > > > index dfbe6448b549..57b4f62106d9 100644
> > > > --- a/drivers/media/i2c/Makefile
> > > > +++ b/drivers/media/i2c/Makefile
> > > > @@ -19,6 +19,7 @@ obj-$(CONFIG_VIDEO_AK7375) += ak7375.o
> > > > obj-$(CONFIG_VIDEO_AK881X) += ak881x.o
> > > > obj-$(CONFIG_VIDEO_ALVIUM_CSI2) += alvium-csi2.o
> > > > obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o
> > > > +obj-$(CONFIG_VIDEO_AR0234) += ar0234.o
> > > > obj-$(CONFIG_VIDEO_AR0521) += ar0521.o
> > > > obj-$(CONFIG_VIDEO_BT819) += bt819.o
> > > > obj-$(CONFIG_VIDEO_BT856) += bt856.o
> > > > diff --git a/drivers/media/i2c/ar0234.c b/drivers/media/i2c/ar0234.c
> > > > new file mode 100644 index 000000000000..80fe5ffd1c64
> > > > --- /dev/null
> > > > +++ b/drivers/media/i2c/ar0234.c
> > > > @@ -0,0 +1,1077 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +// Copyright (c) 2019 - 2024 Intel Corporation.
> > > > +
> > > > +#include <linux/acpi.h>
> > > > +#include <linux/clk.h>
> > > > +#include <linux/delay.h>
> > > > +#include <linux/i2c.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/pm_runtime.h>
> > > > +#include <asm/unaligned.h>
> > > > +
> > > > +#include <media/v4l2-cci.h>
> > > > +#include <media/v4l2-ctrls.h>
> > > > +#include <media/v4l2-event.h>
> > > > +#include <media/v4l2-device.h>
> > > > +#include <media/v4l2-fwnode.h>
> > > > +
> > > > +/* Chip ID */
> > > > +#define AR0234_REG_CHIP_ID CCI_REG16(0x3000)
> > > > +#define AR0234_CHIP_ID 0x0a56
> > > > +
> > > > +#define AR0234_REG_MODE_SELECT CCI_REG16(0x301a)
> > > > +#define AR0234_REG_VTS CCI_REG16(0x300a)
> > > > +#define AR0234_REG_EXPOSURE CCI_REG16(0x3012)
> > > > +#define AR0234_REG_ANALOG_GAIN CCI_REG16(0x3060)
> > > > +#define AR0234_REG_GLOBAL_GAIN CCI_REG16(0x305e)
> > > > +#define AR0234_REG_ORIENTATION CCI_REG16(0x3040)
> > > > +#define AR0234_REG_TEST_PATTERN CCI_REG16(0x0600)
> > > > +
> > > > +#define AR0234_EXPOSURE_MIN 0
> > > > +#define AR0234_EXPOSURE_MAX_MARGIN 80
> > > > +#define AR0234_EXPOSURE_STEP 1
> > > > +
> > > > +#define AR0234_ANALOG_GAIN_MIN 0
> > > > +#define AR0234_ANALOG_GAIN_MAX 0x7f
> > > > +#define AR0234_ANALOG_GAIN_STEP 1
> > > > +#define AR0234_ANALOG_GAIN_DEFAULT 0xe
> > > > +
> > > > +#define AR0234_GLOBAL_GAIN_MIN 0
> > > > +#define AR0234_GLOBAL_GAIN_MAX 0x7ff
> > > > +#define AR0234_GLOBAL_GAIN_STEP 1
> > > > +#define AR0234_GLOBAL_GAIN_DEFAULT 0x80
> > > > +
> > > > +#define AR0234_NATIVE_WIDTH 1920
> > > > +#define AR0234_NATIVE_HEIGHT 1080
> > > > +#define AR0234_COMMON_WIDTH 1280
> > > > +#define AR0234_COMMON_HEIGHT 960
> > > > +#define AR0234_PIXEL_ARRAY_LEFT 320
> > > > +#define AR0234_PIXEL_ARRAY_TOP 60
> > > > +#define AR0234_ORIENTATION_HFLIP BIT(14)
> > > > +#define AR0234_ORIENTATION_VFLIP BIT(15)
> > > > +
> > > > +#define AR0234_VTS_DEFAULT 0x04c4
> > > > +#define AR0234_VTS_MAX 0xffff
> > > > +#define AR0234_HTS_DEFAULT 0x04c4
> > > > +#define AR0234_PPL_DEFAULT 3498
> > > > +
> > > > +#define AR0234_MODE_RESET 0x00d9
> > > > +#define AR0234_MODE_STANDBY 0x2058
> > > > +#define AR0234_MODE_STREAMING 0x205c
> > > > +
> > > > +#define AR0234_PIXEL_RATE 128000000ULL
> > > > +#define AR0234_XCLK_FREQ 19200000ULL
> > > > +
> > > > +#define AR0234_TEST_PATTERN_DISABLE 0
> > > > +#define AR0234_TEST_PATTERN_SOLID_COLOR 1
> > > > +#define AR0234_TEST_PATTERN_COLOR_BARS 2
> > > > +#define AR0234_TEST_PATTERN_GREY_COLOR 3
> > > > +#define AR0234_TEST_PATTERN_WALKING 256
> > > > +
> > > > +#define to_ar0234(_sd) container_of(_sd, struct ar0234, sd)
> > > > +
> > > > +struct ar0234_reg_list {
> > > > + u32 num_of_regs;
> > > > + const struct cci_reg_sequence *regs; };
> > > > +
> > > > +struct ar0234_mode {
> > > > + u32 width;
> > > > + u32 height;
> > > > + u32 hts;
> > > > + u32 vts_def;
> > > > + u32 code;
> > > > + /* Sensor register settings for this mode */
> > > > + const struct ar0234_reg_list reg_list; };
> > > > +
> > > > +static const struct cci_reg_sequence mode_1280x960_10bit_2lane[] = {
> > > > + { CCI_REG16(0x3f4c), 0x121f },
> > > > + { CCI_REG16(0x3f4e), 0x121f },
> > > > + { CCI_REG16(0x3f50), 0x0b81 },
> > > > + { CCI_REG16(0x31e0), 0x0003 },
> > > > + { CCI_REG16(0x30b0), 0x0028 },
> > > > + /* R0x3088 specify the sequencer RAM access address. */
> > > > + { CCI_REG16(0x3088), 0x8000 },
> > > > + /* R0x3086 write the sequencer RAM. */
> > > > + { CCI_REG16(0x3086), 0xc1ae },
> > > > + { CCI_REG16(0x3086), 0x327f },
> > > > + { CCI_REG16(0x3086), 0x5780 },
> > > > + { CCI_REG16(0x3086), 0x272f },
> > > > + { CCI_REG16(0x3086), 0x7416 },
> > >
> > > Storing the sequencer data in this table wastes lots of memory and CPU cycles.
> > > Please move the data out to a
> > >
> > > static const u16 ar0234_sequencer[] = {
> > > 0xc1ae, 0x327f, 0x5780, 0x272f, 0x7416, 0x7e13, 0x8000, 0x307e,
> > > ...
> > > };
> > >
> > > table, and program it with
> > >
> > > /* Program the sequencer. */
> > > cci_write(ar0234->regmap, CCI_REG16(0x3088), 0x8000, &ret);
> > > for (i = 0; i < ARRAY_SIZE(ar0234_sequencer); ++i)
> > > cci_write(ar0234->regmap, CCI_REG16(0x3086),
> > > ar0234_sequencer[i], &ret);
> > >
> > > And please define macros for the sequencer access registers 0x3086 and
> > > 0x3088, as well as for the bits of the 0x3088 register.
> > >
> > > [snip]
> >
> > Through communication with the vendor, we learned that this is a patch
> > (writing to the sequencer) used to optimize the sensor's performance.
> > It is not critical for the driver's normal operation. Therefore, I
> > will remove this patch directly.
>
> I'm fine dropping it or keeping it, it's up to you. If it improves the
> image quality I think it's useful. my only concern is that storing the
> register address in every entry wastes space. With an optimized version
> that only stores the data, I'm fine having the data in the driver.
>
> > > > + { CCI_REG16(0x302a), 0x0005 },
> > > > + { CCI_REG16(0x302c), 0x0001 },
> > > > + { CCI_REG16(0x302e), 0x0003 },
> > > > + { CCI_REG16(0x3030), 0x0032 },
> > > > + { CCI_REG16(0x3036), 0x000a },
> > > > + { CCI_REG16(0x3038), 0x0001 },
> > > > + { CCI_REG16(0x30b0), 0x0028 },
> > > > + { CCI_REG16(0x31b0), 0x0082 },
> > > > + { CCI_REG16(0x31b2), 0x005c },
> > > > + { CCI_REG16(0x31b4), 0x5248 },
> > > > + { CCI_REG16(0x31b6), 0x3257 },
> > > > + { CCI_REG16(0x31b8), 0x904b },
> > > > + { CCI_REG16(0x31ba), 0x030b },
> > > > + { CCI_REG16(0x31bc), 0x8e09 },
> > > > + { CCI_REG16(0x3354), 0x002b },
> > > > + { CCI_REG16(0x31d0), 0x0000 },
> > > > + { CCI_REG16(0x31ae), 0x0204 },
> > > > + { CCI_REG16(0x3002), 0x0080 },
> > > > + { CCI_REG16(0x3004), 0x0148 },
> > > > + { CCI_REG16(0x3006), 0x043f },
> > > > + { CCI_REG16(0x3008), 0x0647 },
> > > > + { CCI_REG16(0x3064), 0x1802 },
> > > > + { CCI_REG16(0x300a), 0x04c4 },
> > > > + { CCI_REG16(0x300c), 0x04c4 },
> > > > + { CCI_REG16(0x30a2), 0x0001 },
> > > > + { CCI_REG16(0x30a6), 0x0001 },
> > > > + { CCI_REG16(0x3012), 0x010c },
> > > > + { CCI_REG16(0x3786), 0x0006 },
> > > > + { CCI_REG16(0x31ae), 0x0202 },
> > > > + { CCI_REG16(0x3088), 0x8050 },
> > > > + { CCI_REG16(0x3086), 0x9237 },
> > >
> > > This can stay here if it needs to be programmed separately from the rest of the
> > > sequencer data, but please use macros to replace the hardcoded register
> > > addresses, and the value of the 0x3088 register.
> >
> > I will annotate each of their usages here. These are two recommended
> > common settings provided by the vendor.
> >
> > > > + { CCI_REG16(0x3044), 0x0410 },
> > > > + { CCI_REG16(0x3094), 0x03d4 },
> > > > + { CCI_REG16(0x3096), 0x0280 },
> > > > + { CCI_REG16(0x30ba), 0x7606 },
> > > > + { CCI_REG16(0x30b0), 0x0028 },
> > > > + { CCI_REG16(0x30ba), 0x7600 },
> > > > + { CCI_REG16(0x30fe), 0x002a },
> > > > + { CCI_REG16(0x31de), 0x0410 },
> > > > + { CCI_REG16(0x3ed6), 0x1435 },
> > > > + { CCI_REG16(0x3ed8), 0x9865 },
> > > > + { CCI_REG16(0x3eda), 0x7698 },
> > > > + { CCI_REG16(0x3edc), 0x99ff },
> > > > + { CCI_REG16(0x3ee2), 0xbb88 },
> > > > + { CCI_REG16(0x3ee4), 0x8836 },
> > > > + { CCI_REG16(0x3ef0), 0x1cf0 },
> > > > + { CCI_REG16(0x3ef2), 0x0000 },
> > > > + { CCI_REG16(0x3ef8), 0x6166 },
> > > > + { CCI_REG16(0x3efa), 0x3333 },
> > > > + { CCI_REG16(0x3efc), 0x6634 },
> > > > + { CCI_REG16(0x3088), 0x81ba },
> > > > + { CCI_REG16(0x3086), 0x3d02 },
> > >
> > > Same here.
> > >
> > > > + { CCI_REG16(0x3276), 0x05dc },
> > > > + { CCI_REG16(0x3f00), 0x9d05 },
> > > > + { CCI_REG16(0x3ed2), 0xfa86 },
> > > > + { CCI_REG16(0x3eee), 0xa4fe },
> > > > + { CCI_REG16(0x3ecc), 0x6e42 },
> > > > + { CCI_REG16(0x3ecc), 0x0e42 },
> > > > + { CCI_REG16(0x3eec), 0x0c0c },
> > > > + { CCI_REG16(0x3ee8), 0xaae4 },
> > > > + { CCI_REG16(0x3ee6), 0x3363 },
> > > > + { CCI_REG16(0x3ee6), 0x3363 },
> > > > + { CCI_REG16(0x3ee8), 0xaae4 },
> > > > + { CCI_REG16(0x3ee8), 0xaae4 },
> > > > + { CCI_REG16(0x3180), 0xc24f },
> > > > + { CCI_REG16(0x3102), 0x5000 },
> > > > + { CCI_REG16(0x3060), 0x000d },
> > > > + { CCI_REG16(0x3ed0), 0xff44 },
> > > > + { CCI_REG16(0x3ed2), 0xaa86 },
> > > > + { CCI_REG16(0x3ed4), 0x031f },
> > > > + { CCI_REG16(0x3eee), 0xa4aa },
> > >
> > > Among all the registers above, at least the following need a macro for the
> > > register name and register bits:
> > >
> > > 0x3002, 0x3004, 0x3006, 0x3008, 0x300a, 0x300c, 0x3012, 0x302a, 0x302c,
> > > 0x302e, 0x3030, 0x3036, 0x3038, 0x3060, 0x3064, 0x30a2, 0x30a6, 0x30b0,
> > > 0x30fe, 0x3102, 0x3180, 0x31ae, 0x31b0, 0x31b2, 0x31b4, 0x31b6, 0x31b8,
> > > 0x31ba, 0x31bc, 0x31d0, 0x31e0, 0x3354,
> > > 0x3786
> > >
> > > Some of them should also be handled programmatically, not hardcoded.
> >
> > Thanks for your comments, I replace all with macros now.
> >
> > > Ideally, the following registers should also be documented with macros:
> > >
> > > 0x3044, 0x3094, 0x3096, 0x30ba, 0x31de, 0x3276
> >
> > Most of the registers you listed cannot be found in the spec, and they
> > work together within the recommended common settings provided by the
> > vendor. Because the functions of these registers are not singular,
> > defining macros not specified in the spec can cause misunderstandings.
> > I add necessary comments to make code more readable.
>
> OK I'm fine with that.
>
> > > 0x30ba, in particular, varies depending on the analog gain and pixel
> > > clock, so it needs to be handled programmatically.
> >
> > 0x30BA is independent of analog gain and pixel clock.
>
> Doesn't table 26 in the developer guide show otherwise (for bits [2:0]
> at least) ?
I'll agree with you, but only if the pixel clock (not rate) is not 90MHz.
I haven't read through this version of the patch set to work out what
the pixel clock is configured as. I'd queried all the clock setup and
timing values in v2 as they looked odd.
> > Under the current pixel clock settings, 0x30BA is fixed in spec and
> > set to 0x7606.
The bottom 3 bits being fixed at 0x6 is fine if the pixel clock is 45
or 22.5MHz according to table 26.
> Right. I've looked at the clock speed, AR0234_XCLK_FREQ is set to 19.2
> MHz. That's a pretty unusual value.
Not that unusual.
If you check the mainline drivers, you'll find imx258, imx319, imx355,
og01a1b, ov08x40, ov5670, ov5675, ov5693, and a number of others all
use 19.2MHz clock inputs.
There's a common element in which company submitted all those drivers....
Dave
> Given that the sensor uses a quite
> standard PLL model, I think you can use the ccs-pll helper to calculate
> the PLL parameters dynamically at runtime. See for instance
> https://lore.kernel.org/linux-media/20240630141802.15830-3-laurent.pinchart@xxxxxxxxxxxxxxxx/
> for an example of how to do so, for a sensor that has a very similar (if
> not identical) PLL topology. Sakari can also help if you have issues
> with the ccs-pll helper.
>
> > It would be better to configure it to the recommended value but not
> > crucial (the vendor did not provide a clear explanation whether this
> > is for image quality or performance). handling it should be considered
> > an optimization patch if using more pxlclk configurations in the
> > future.
> >
> > > > +};
> > > > +
> > > > +static const char * const ar0234_test_pattern_menu[] = {
> > > > + "Disabled",
> > > > + "Color Bars",
> > > > + "Solid Color",
> > > > + "Grey Color Bars",
> > > > + "Walking 1s",
> > > > +};
> > > > +
> > > > +static const int ar0234_test_pattern_val[] = {
> > > > + AR0234_TEST_PATTERN_DISABLE,
> > > > + AR0234_TEST_PATTERN_COLOR_BARS,
> > > > + AR0234_TEST_PATTERN_SOLID_COLOR,
> > > > + AR0234_TEST_PATTERN_GREY_COLOR,
> > > > + AR0234_TEST_PATTERN_WALKING,
> > > > +};
> > > > +
> > > > +static const s64 link_freq_menu_items[] = {
> > > > + 360000000ULL,
> > > > +};
> > > > +
> > > > +static const struct ar0234_mode supported_modes[] = {
> > > > + {
> > > > + .width = AR0234_COMMON_WIDTH,
> > > > + .height = AR0234_COMMON_HEIGHT,
> > > > + .hts = AR0234_HTS_DEFAULT,
> > > > + .vts_def = AR0234_VTS_DEFAULT,
> > > > + .code = MEDIA_BUS_FMT_SGRBG10_1X10,
> > > > + .reg_list = {
> > > > + .num_of_regs = ARRAY_SIZE(mode_1280x960_10bit_2lane),
> > > > + .regs = mode_1280x960_10bit_2lane,
> > > > + },
> > > > + },
> > > > +};
> > > > +
> > > > +struct ar0234 {
> > > > + struct v4l2_subdev sd;
> > > > + struct media_pad pad;
> > > > + struct v4l2_ctrl_handler ctrl_handler;
> > > > +
> > > > + /* V4L2 Controls */
> > > > + struct v4l2_ctrl *link_freq;
> > > > + struct v4l2_ctrl *exposure;
> > > > + struct v4l2_ctrl *hblank;
> > > > + struct v4l2_ctrl *vblank;
> > > > + struct v4l2_ctrl *vflip;
> > > > + struct v4l2_ctrl *hflip;
> > > > + struct regmap *regmap;
> > > > + unsigned long link_freq_bitmap;
> > > > + const struct ar0234_mode *cur_mode;
> > > > +};
> > > > +
> > > > +static int ar0234_set_ctrl(struct v4l2_ctrl *ctrl) {
> > > > + struct ar0234 *ar0234 =
> > > > + container_of(ctrl->handler, struct ar0234, ctrl_handler);
> > > > + struct i2c_client *client = v4l2_get_subdevdata(&ar0234->sd);
> > > > + s64 exposure_max, exposure_def;
> > > > + struct v4l2_subdev_state *state;
> > > > + const struct v4l2_mbus_framefmt *format;
> > > > + int ret;
> > > > +
> > > > + state = v4l2_subdev_get_locked_active_state(&ar0234->sd);
> > > > + format = v4l2_subdev_state_get_format(state, 0);
> > > > +
> > > > + /* Propagate change of current control to all related controls */
> > > > + if (ctrl->id == V4L2_CID_VBLANK) {
> > > > + /* Update max exposure while meeting expected vblanking */
> > > > + exposure_max = format->height + ctrl->val -
> > > > + AR0234_EXPOSURE_MAX_MARGIN;
> > > > + exposure_def = format->height - AR0234_EXPOSURE_MAX_MARGIN;
> > > > + __v4l2_ctrl_modify_range(ar0234->exposure,
> > > > + ar0234->exposure->minimum,
> > > > + exposure_max, ar0234->exposure->step,
> > > > + exposure_def);
> > > > + }
> > > > +
> > > > + /* V4L2 controls values will be applied only when power is already up */
> > > > + if (!pm_runtime_get_if_in_use(&client->dev))
> > > > + return 0;
> > > > +
> > > > + switch (ctrl->id) {
> > > > + case V4L2_CID_ANALOGUE_GAIN:
> > > > + ret = cci_write(ar0234->regmap, AR0234_REG_ANALOG_GAIN,
> > > > + ctrl->val, NULL);
> > > > + break;
> > > > +
> > > > + case V4L2_CID_DIGITAL_GAIN:
> > > > + ret = cci_write(ar0234->regmap, AR0234_REG_GLOBAL_GAIN,
> > > > + ctrl->val, NULL);
> > > > + break;
> > > > +
> > > > + case V4L2_CID_EXPOSURE:
> > > > + ret = cci_write(ar0234->regmap, AR0234_REG_EXPOSURE,
> > > > + ctrl->val, NULL);
> > > > + break;
> > > > +
> > > > + case V4L2_CID_VBLANK:
> > > > + ret = cci_write(ar0234->regmap, AR0234_REG_VTS,
> > > > + ar0234->cur_mode->height + ctrl->val, NULL);
> > > > + break;
> > > > +
> > > > + case V4L2_CID_HFLIP:
> > > > + case V4L2_CID_VFLIP:
> > > > + u64 reg;
> > > > +
> > > > + ret = cci_read(ar0234->regmap, AR0234_REG_ORIENTATION,
> > > > + ®, NULL);
> > > > + if (ret)
> > > > + break;
> > > > +
> > > > + reg &= ~(AR0234_ORIENTATION_HFLIP |
> > > > + AR0234_ORIENTATION_VFLIP);
> > > > + if (ar0234->hflip->val)
> > > > + reg |= AR0234_ORIENTATION_HFLIP;
> > > > + if (ar0234->vflip->val)
> > > > + reg |= AR0234_ORIENTATION_VFLIP;
> > > > +
> > > > + ret = cci_write(ar0234->regmap, AR0234_REG_ORIENTATION,
> > > > + reg, NULL);
> > > > + break;
> > > > +
> > > > + case V4L2_CID_TEST_PATTERN:
> > > > + ret = cci_write(ar0234->regmap, AR0234_REG_TEST_PATTERN,
> > > > + ar0234_test_pattern_val[ctrl->val], NULL);
> > > > + break;
> > > > +
> > > > + default:
> > > > + ret = -EINVAL;
> > > > + break;
> > > > + }
> > > > +
> > > > + pm_runtime_put(&client->dev);
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static const struct v4l2_ctrl_ops ar0234_ctrl_ops = {
> > > > + .s_ctrl = ar0234_set_ctrl,
> > > > +};
> > > > +
> > > > +static int ar0234_init_controls(struct ar0234 *ar0234) {
> > > > + struct i2c_client *client = v4l2_get_subdevdata(&ar0234->sd);
> > > > + struct v4l2_fwnode_device_properties props;
> > > > + struct v4l2_ctrl_handler *ctrl_hdlr;
> > > > + s64 exposure_max, vblank_max, vblank_def, hblank;
> > > > + u32 link_freq_size;
> > > > + int ret;
> > > > +
> > > > + ctrl_hdlr = &ar0234->ctrl_handler;
> > > > + ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + link_freq_size = ARRAY_SIZE(link_freq_menu_items) - 1;
> > > > + ar0234->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr,
> > > > + &ar0234_ctrl_ops,
> > > > + V4L2_CID_LINK_FREQ,
> > > > + link_freq_size, 0,
> > > > + link_freq_menu_items);
> > > > + if (ar0234->link_freq)
> > > > + ar0234->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > > > +
> > > > + v4l2_ctrl_new_std(ctrl_hdlr, &ar0234_ctrl_ops,
> > > V4L2_CID_ANALOGUE_GAIN,
> > > > + AR0234_ANALOG_GAIN_MIN, AR0234_ANALOG_GAIN_MAX,
> > > > + AR0234_ANALOG_GAIN_STEP,
> > > AR0234_ANALOG_GAIN_DEFAULT);
> > > > + v4l2_ctrl_new_std(ctrl_hdlr, &ar0234_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
> > > > + AR0234_GLOBAL_GAIN_MIN, AR0234_GLOBAL_GAIN_MAX,
> > > > + AR0234_GLOBAL_GAIN_STEP,
> > > AR0234_GLOBAL_GAIN_DEFAULT);
> > > > +
> > > > + exposure_max = ar0234->cur_mode->vts_def -
> > > AR0234_EXPOSURE_MAX_MARGIN;
> > > > + ar0234->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ar0234_ctrl_ops,
> > > > + V4L2_CID_EXPOSURE,
> > > > + AR0234_EXPOSURE_MIN, exposure_max,
> > > > + AR0234_EXPOSURE_STEP,
> > > > + exposure_max);
> > > > +
> > > > + v4l2_ctrl_new_std(ctrl_hdlr, &ar0234_ctrl_ops, V4L2_CID_PIXEL_RATE,
> > > > + AR0234_PIXEL_RATE, AR0234_PIXEL_RATE, 1,
> > > > + AR0234_PIXEL_RATE);
> > > > +
> > > > + vblank_max = AR0234_VTS_MAX - ar0234->cur_mode->height;
> > > > + vblank_def = ar0234->cur_mode->vts_def - ar0234->cur_mode->height;
> > > > + ar0234->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &ar0234_ctrl_ops,
> > > > + V4L2_CID_VBLANK, 0, vblank_max, 1,
> > > > + vblank_def);
> > > > + hblank = AR0234_PPL_DEFAULT - ar0234->cur_mode->width;
> > > > + ar0234->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ar0234_ctrl_ops,
> > > > + V4L2_CID_HBLANK, hblank, hblank, 1,
> > > > + hblank);
> > > > + if (ar0234->hblank)
> > > > + ar0234->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > > > +
> > > > + ar0234->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &ar0234_ctrl_ops,
> > > > + V4L2_CID_HFLIP, 0, 1, 1, 0);
> > > > + ar0234->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &ar0234_ctrl_ops,
> > > > + V4L2_CID_VFLIP, 0, 1, 1, 0);
> > > > +
> > > > + v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ar0234_ctrl_ops,
> > > > + V4L2_CID_TEST_PATTERN,
> > > > + ARRAY_SIZE(ar0234_test_pattern_menu) - 1,
> > > > + 0, 0, ar0234_test_pattern_menu);
> > > > +
> > > > + if (ctrl_hdlr->error)
> > > > + return ctrl_hdlr->error;
> > > > +
> > > > + ret = v4l2_fwnode_device_parse(&client->dev, &props);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &ar0234_ctrl_ops,
> > > > + &props);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ar0234->sd.ctrl_handler = ctrl_hdlr;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static void ar0234_update_pad_format(const struct ar0234_mode *mode,
> > > > + struct v4l2_mbus_framefmt *fmt) {
> > > > + fmt->width = mode->width;
> > > > + fmt->height = mode->height;
> > > > + fmt->code = mode->code;
> > > > + fmt->field = V4L2_FIELD_NONE;
> > > > +}
> > > > +
> > > > +static int ar0234_start_streaming(struct ar0234 *ar0234) {
> > > > + struct i2c_client *client = v4l2_get_subdevdata(&ar0234->sd);
> > > > + const struct ar0234_reg_list *reg_list;
> > > > + int ret;
> > > > +
> > > > + ret = pm_runtime_resume_and_get(&client->dev);
> > > > + if (ret < 0)
> > > > + return ret;
> > > > +
> > > > + /*
> > > > + * Setting 0x301A.bit[0] will initiate a reset sequence:
> > > > + * the frame being generated will be truncated.
> > > > + */
> > > > + ret = cci_write(ar0234->regmap, AR0234_REG_MODE_SELECT,
> > > > + AR0234_MODE_RESET, NULL);
> > > > + if (ret) {
> > > > + dev_err(&client->dev, "failed to reset");
> > > > + goto err_rpm_put;
> > > > + }
> > > > +
> > > > + usleep_range(1000, 1500);
> > > > +
> > > > + reg_list = &ar0234->cur_mode->reg_list;
> > > > + ret = cci_multi_reg_write(ar0234->regmap, reg_list->regs,
> > > > + reg_list->num_of_regs, NULL);
> > > > + if (ret) {
> > > > + dev_err(&client->dev, "failed to set mode");
> > > > + goto err_rpm_put;
> > > > + }
> > > > +
> > > > + ret = __v4l2_ctrl_handler_setup(ar0234->sd.ctrl_handler);
> > > > + if (ret)
> > > > + goto err_rpm_put;
> > > > +
> > > > + ret = cci_write(ar0234->regmap, AR0234_REG_MODE_SELECT,
> > > > + AR0234_MODE_STREAMING, NULL);
> > > > + if (ret) {
> > > > + dev_err(&client->dev, "failed to start stream");
> > > > + goto err_rpm_put;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +
> > > > +err_rpm_put:
> > > > + pm_runtime_put(&client->dev);
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static int ar0234_stop_streaming(struct ar0234 *ar0234) {
> > > > + int ret;
> > > > + struct i2c_client *client = v4l2_get_subdevdata(&ar0234->sd);
> > > > +
> > > > + ret = cci_write(ar0234->regmap, AR0234_REG_MODE_SELECT,
> > > > + AR0234_MODE_STANDBY, NULL);
> > > > + if (ret < 0)
> > > > + dev_err(&client->dev, "failed to stop stream");
> > > > +
> > > > + pm_runtime_put(&client->dev);
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static int ar0234_set_stream(struct v4l2_subdev *sd, int enable) {
> > > > + struct ar0234 *ar0234 = to_ar0234(sd);
> > > > + struct v4l2_subdev_state *state;
> > > > + int ret = 0;
> > > > +
> > > > + state = v4l2_subdev_lock_and_get_active_state(sd);
> > > > +
> > > > + if (enable)
> > > > + ret = ar0234_start_streaming(ar0234);
> > > > + else
> > > > + ret = ar0234_stop_streaming(ar0234);
> > > > +
> > > > + /* vflip and hflip cannot change during streaming */
> > > > + __v4l2_ctrl_grab(ar0234->vflip, enable);
> > > > + __v4l2_ctrl_grab(ar0234->hflip, enable);
> > > > + v4l2_subdev_unlock_state(state);
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static int ar0234_set_format(struct v4l2_subdev *sd,
> > > > + struct v4l2_subdev_state *sd_state,
> > > > + struct v4l2_subdev_format *fmt) {
> > > > + struct ar0234 *ar0234 = to_ar0234(sd);
> > > > + struct i2c_client *client = v4l2_get_subdevdata(&ar0234->sd);
> > > > + struct v4l2_rect *crop;
> > > > + const struct ar0234_mode *mode;
> > > > + s64 hblank;
> > > > + int ret;
> > > > +
> > > > + mode = v4l2_find_nearest_size(supported_modes,
> > > > + ARRAY_SIZE(supported_modes),
> > > > + width, height,
> > > > + fmt->format.width,
> > > > + fmt->format.height);
> > > > +
> > > > + crop = v4l2_subdev_state_get_crop(sd_state, fmt->pad);
> > > > + crop->width = mode->width;
> > > > + crop->height = mode->height;
> > > > +
> > > > + ar0234_update_pad_format(mode, &fmt->format);
> > > > + *v4l2_subdev_state_get_format(sd_state, fmt->pad) = fmt->format;
> > > > +
> > > > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> > > > + return 0;
> > > > +
> > > > + ar0234->cur_mode = mode;
> > > > +
> > > > + hblank = AR0234_PPL_DEFAULT - mode->width;
> > > > + ret = __v4l2_ctrl_modify_range(ar0234->hblank, hblank, hblank,
> > > > + 1, hblank);
> > > > + if (ret) {
> > > > + dev_err(&client->dev, "HB ctrl range update failed");
> > > > + return ret;
> > > > + }
> > > > +
> > > > + /* Update limits and set FPS to default */
> > > > + ret = __v4l2_ctrl_modify_range(ar0234->vblank, 0,
> > > > + AR0234_VTS_MAX - mode->height, 1,
> > > > + mode->vts_def - mode->height);
> > > > + if (ret) {
> > > > + dev_err(&client->dev, "VB ctrl range update failed");
> > > > + return ret;
> > > > + }
> > > > +
> > > > + ret = __v4l2_ctrl_s_ctrl(ar0234->vblank, mode->vts_def - mode->height);
> > > > + if (ret) {
> > > > + dev_err(&client->dev, "VB ctrl set failed");
> > > > + return ret;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int ar0234_enum_mbus_code(struct v4l2_subdev *sd,
> > > > + struct v4l2_subdev_state *sd_state,
> > > > + struct v4l2_subdev_mbus_code_enum *code) {
> > > > + if (code->index > 0)
> > > > + return -EINVAL;
> > > > +
> > > > + code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int ar0234_enum_frame_size(struct v4l2_subdev *sd,
> > > > + struct v4l2_subdev_state *sd_state,
> > > > + struct v4l2_subdev_frame_size_enum *fse) {
> > > > + if (fse->index >= ARRAY_SIZE(supported_modes))
> > > > + return -EINVAL;
> > > > +
> > > > + if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
> > > > + return -EINVAL;
> > > > +
> > > > + fse->min_width = supported_modes[fse->index].width;
> > > > + fse->max_width = fse->min_width;
> > > > + fse->min_height = supported_modes[fse->index].height;
> > > > + fse->max_height = fse->min_height;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int ar0234_get_selection(struct v4l2_subdev *sd,
> > > > + struct v4l2_subdev_state *state,
> > > > + struct v4l2_subdev_selection *sel) {
> > > > + switch (sel->target) {
> > > > + case V4L2_SEL_TGT_CROP_DEFAULT:
> > > > + case V4L2_SEL_TGT_CROP_BOUNDS:
> > > > + sel->r.top = AR0234_PIXEL_ARRAY_TOP;
> > > > + sel->r.left = AR0234_PIXEL_ARRAY_LEFT;
> > > > + sel->r.width = AR0234_COMMON_WIDTH;
> > > > + sel->r.height = AR0234_COMMON_HEIGHT;
> > > > + break;
> > > > +
> > > > + case V4L2_SEL_TGT_CROP:
> > > > + sel->r = *v4l2_subdev_state_get_crop(state, 0);
> > > > + break;
> > > > +
> > > > + case V4L2_SEL_TGT_NATIVE_SIZE:
> > > > + sel->r.top = 0;
> > > > + sel->r.left = 0;
> > > > + sel->r.width = AR0234_NATIVE_WIDTH;
> > > > + sel->r.height = AR0234_NATIVE_HEIGHT;
> > > > + break;
> > > > +
> > > > + default:
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int ar0234_init_state(struct v4l2_subdev *sd,
> > > > + struct v4l2_subdev_state *sd_state) {
> > > > + struct v4l2_subdev_format fmt = {
> > > > + .which = V4L2_SUBDEV_FORMAT_TRY,
> > > > + .pad = 0,
> > > > + .format = {
> > > > + .code = MEDIA_BUS_FMT_SGRBG10_1X10,
> > > > + .width = AR0234_COMMON_WIDTH,
> > > > + .height = AR0234_COMMON_HEIGHT,
> > > > + },
> > > > + };
> > > > +
> > > > + ar0234_set_format(sd, sd_state, &fmt);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static const struct v4l2_subdev_video_ops ar0234_video_ops = {
> > > > + .s_stream = ar0234_set_stream,
> > > > +};
> > > > +
> > > > +static const struct v4l2_subdev_pad_ops ar0234_pad_ops = {
> > > > + .set_fmt = ar0234_set_format,
> > > > + .get_fmt = v4l2_subdev_get_fmt,
> > > > + .enum_mbus_code = ar0234_enum_mbus_code,
> > > > + .enum_frame_size = ar0234_enum_frame_size,
> > > > + .get_selection = ar0234_get_selection, };
> > > > +
> > > > +static const struct v4l2_subdev_core_ops ar0234_core_ops = {
> > > > + .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> > > > + .unsubscribe_event = v4l2_event_subdev_unsubscribe, };
> > > > +
> > > > +static const struct v4l2_subdev_ops ar0234_subdev_ops = {
> > > > + .core = &ar0234_core_ops,
> > > > + .video = &ar0234_video_ops,
> > > > + .pad = &ar0234_pad_ops,
> > > > +};
> > > > +
> > > > +static const struct media_entity_operations ar0234_subdev_entity_ops = {
> > > > + .link_validate = v4l2_subdev_link_validate, };
> > > > +
> > > > +static const struct v4l2_subdev_internal_ops ar0234_internal_ops = {
> > > > + .init_state = ar0234_init_state,
> > > > +};
> > > > +
> > > > +static int ar0234_parse_fwnode(struct ar0234 *ar0234, struct device
> > > > +*dev) {
> > > > + struct fwnode_handle *endpoint;
> > > > + struct v4l2_fwnode_endpoint bus_cfg = {
> > > > + .bus_type = V4L2_MBUS_CSI2_DPHY,
> > > > + };
> > > > + int ret;
> > > > +
> > > > + endpoint =
> > > > + fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0,
> > > > + FWNODE_GRAPH_ENDPOINT_NEXT);
> > > > + if (!endpoint) {
> > > > + dev_err(dev, "endpoint node not found");
> > > > + return -EPROBE_DEFER;
> > > > + }
> > > > +
> > > > + ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg);
> > > > + if (ret) {
> > > > + dev_err(dev, "parsing endpoint node failed");
> > > > + goto out_err;
> > > > + }
> > > > +
> > > > + /* Check the number of MIPI CSI2 data lanes */
> > > > + if (bus_cfg.bus.mipi_csi2.num_data_lanes != 2 &&
> > > > + bus_cfg.bus.mipi_csi2.num_data_lanes != 4) {
> > > > + dev_err(dev, "only 2 or 4 data lanes are currently supported");
> > > > + goto out_err;
> > > > + }
> > > > +
> > > > + ret = v4l2_link_freq_to_bitmap(dev, bus_cfg.link_frequencies,
> > > > + bus_cfg.nr_of_link_frequencies,
> > > > + link_freq_menu_items,
> > > > + ARRAY_SIZE(link_freq_menu_items),
> > > > + &ar0234->link_freq_bitmap);
> > > > + if (ret)
> > > > + goto out_err;
> > > > +
> > > > +out_err:
> > > > + v4l2_fwnode_endpoint_free(&bus_cfg);
> > > > + fwnode_handle_put(endpoint);
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static int ar0234_identify_module(struct ar0234 *ar0234) {
> > > > + struct i2c_client *client = v4l2_get_subdevdata(&ar0234->sd);
> > > > + int ret;
> > > > + u64 val;
> > > > +
> > > > + ret = cci_read(ar0234->regmap, AR0234_REG_CHIP_ID, &val, NULL);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + if (val != AR0234_CHIP_ID) {
> > > > + dev_err(&client->dev, "chip id mismatch: %x!=%llx",
> > > > + AR0234_CHIP_ID, val);
> > > > + return -ENXIO;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static void ar0234_remove(struct i2c_client *client) {
> > > > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > > > + struct ar0234 *ar0234 = to_ar0234(sd);
> > > > +
> > > > + v4l2_async_unregister_subdev(&ar0234->sd);
> > > > + v4l2_subdev_cleanup(sd);
> > > > + media_entity_cleanup(&ar0234->sd.entity);
> > > > + v4l2_ctrl_handler_free(&ar0234->ctrl_handler);
> > > > + pm_runtime_disable(&client->dev);
> > > > + pm_runtime_set_suspended(&client->dev);
> > > > +}
> > > > +
> > > > +static int ar0234_probe(struct i2c_client *client) {
> > > > + struct device *dev = &client->dev;
> > > > + struct ar0234 *ar0234;
> > > > + struct clk *xclk;
> > > > + u32 xclk_freq;
> > > > + int ret;
> > > > +
> > > > + ar0234 = devm_kzalloc(&client->dev, sizeof(*ar0234), GFP_KERNEL);
> > > > + if (!ar0234)
> > > > + return -ENOMEM;
> > > > +
> > > > + ret = ar0234_parse_fwnode(ar0234, dev);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ar0234->regmap = devm_cci_regmap_init_i2c(client, 16);
> > > > + if (IS_ERR(ar0234->regmap))
> > > > + return dev_err_probe(dev, PTR_ERR(ar0234->regmap),
> > > > + "failed to init CCI");
> > > > +
> > > > + v4l2_i2c_subdev_init(&ar0234->sd, client, &ar0234_subdev_ops);
> > > > +
> > > > + xclk = devm_clk_get(dev, NULL);
> > > > + if (IS_ERR(xclk)) {
> > > > + if (PTR_ERR(xclk) != -EPROBE_DEFER)
> > > > + dev_err(dev, "failed to get xclk %ld", PTR_ERR(xclk));
> > > > + return PTR_ERR(xclk);
> > > > + }
> > > > +
> > > > + xclk_freq = clk_get_rate(xclk);
> > > > + if (xclk_freq != AR0234_XCLK_FREQ) {
> > > > + dev_err(dev, "xclk frequency not supported: %d Hz", xclk_freq);
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + /* Check module identity */
> > > > + ret = ar0234_identify_module(ar0234);
> > > > + if (ret) {
> > > > + dev_err(dev, "failed to find sensor: %d", ret);
> > > > + return ret;
> > > > + }
> > > > +
> > > > + ar0234->cur_mode = &supported_modes[0];
> > > > + ret = ar0234_init_controls(ar0234);
> > > > + if (ret) {
> > > > + dev_err(&client->dev, "failed to init controls: %d", ret);
> > > > + goto probe_error_v4l2_ctrl_handler_free;
> > > > + }
> > > > +
> > > > + ar0234->sd.internal_ops = &ar0234_internal_ops;
> > > > + ar0234->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> > > > + V4L2_SUBDEV_FL_HAS_EVENTS;
> > > > + ar0234->sd.entity.ops = &ar0234_subdev_entity_ops;
> > > > + ar0234->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > > > +
> > > > + ar0234->pad.flags = MEDIA_PAD_FL_SOURCE;
> > > > + ret = media_entity_pads_init(&ar0234->sd.entity, 1, &ar0234->pad);
> > > > + if (ret) {
> > > > + dev_err(&client->dev, "failed to init entity pads: %d", ret);
> > > > + goto probe_error_v4l2_ctrl_handler_free;
> > > > + }
> > > > +
> > > > + ar0234->sd.state_lock = ar0234->ctrl_handler.lock;
> > > > + ret = v4l2_subdev_init_finalize(&ar0234->sd);
> > > > + if (ret < 0) {
> > > > + dev_err(dev, "v4l2 subdev init error: %d", ret);
> > > > + goto probe_error_media_entity_cleanup;
> > > > + }
> > > > +
> > > > + /*
> > > > + * Device is already turned on by i2c-core with ACPI domain PM.
> > > > + * Enable runtime PM and turn off the device.
> > > > + */
> > > > + pm_runtime_set_active(&client->dev);
> > > > + pm_runtime_enable(&client->dev);
> > > > + pm_runtime_idle(&client->dev);
> > > > +
> > > > + ret = v4l2_async_register_subdev_sensor(&ar0234->sd);
> > > > + if (ret < 0) {
> > > > + dev_err(&client->dev, "failed to register V4L2 subdev: %d",
> > > > + ret);
> > > > + goto probe_error_rpm;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +probe_error_rpm:
> > > > + pm_runtime_disable(&client->dev);
> > > > + v4l2_subdev_cleanup(&ar0234->sd);
> > > > +
> > > > +probe_error_media_entity_cleanup:
> > > > + media_entity_cleanup(&ar0234->sd.entity);
> > > > +
> > > > +probe_error_v4l2_ctrl_handler_free:
> > > > + v4l2_ctrl_handler_free(ar0234->sd.ctrl_handler);
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static const struct acpi_device_id ar0234_acpi_ids[] = {
> > > > + { "INTC10C0" },
> > > > + {}
> > > > +};
> > > > +MODULE_DEVICE_TABLE(acpi, ar0234_acpi_ids);
> > > > +
> > > > +static struct i2c_driver ar0234_i2c_driver = {
> > > > + .driver = {
> > > > + .name = "ar0234",
> > > > + .acpi_match_table = ACPI_PTR(ar0234_acpi_ids),
> > > > + },
> > > > + .probe = ar0234_probe,
> > > > + .remove = ar0234_remove,
> > > > +};
> > > > +
> > > > +module_i2c_driver(ar0234_i2c_driver);
> > > > +
> > > > +MODULE_DESCRIPTION("ON Semiconductor ar0234 sensor driver");
> > > > +MODULE_AUTHOR("Dongcheng Yan <dongcheng.yan@xxxxxxxxx>");
> > > > +MODULE_AUTHOR("Hao Yao <hao.yao@xxxxxxxxx>");
> > > MODULE_LICENSE("GPL");
>
> --
> Regards,
>
> Laurent Pinchart
