Hi I am using this driver with USB 1b80:s395 Modules load scandvb gets channels /dev/dvb gets created dvbtune seems to tune to transponder however none of the other dvb utilities seem to work ie: dvbdate dvbsnoop (except forfeinfo) dvbtraffic dvbstream example dvbsnoop -s feinfo dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ --------------------------------------------------------- FrontEnd Info... --------------------------------------------------------- Device: /dev/dvb/adapter0/frontend0 Basic capabilities: Name: "Realtek RTL2832 DVB-T RTL2836 DTMB" Frontend-type: OFDM (DVB-T) Frequency (min): 174000.000 kHz Frequency (max): 862000.000 kHz Frequency stepsiz: 166.667 kHz Frequency tolerance: 0.000 kHz Symbol rate (min): 0.000000 MSym/s Symbol rate (max): 0.000000 MSym/s Symbol rate tolerance: 0 ppm Notifier delay: 0 ms Frontend capabilities: auto inversion FEC 1/2 FEC 2/3 FEC 3/4 FEC 5/6 FEC 7/8 FEC AUTO QPSK QAM 16 QAM 64 QAM AUTO auto transmission mode auto guard interval auto hierarchy Current parameters: Frequency: 497833.000 kHz Inversion: OFF Bandwidth: 8 MHz Stream code rate (hi prio): FEC 2/3 Stream code rate (lo prio): FEC AUTO Modulation: QAM 64 Transmission mode: 2k mode Guard interval: 1/32 Hierarchy: none dvbdate ......................... dvbdate: timeout - try tuning to a multiplex? dvbdate: Unable to get time from multiplex. any ideas? -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html