On 4/3/24 11:03, Ondřej Jirman wrote:
> Hi,
>
> On Wed, Apr 03, 2024 at 04:28:59PM GMT, Sakari Ailus wrote:
>> Hi Luis,
>>
>> Could you unify the subject prefix for the driver patches, please? E.g.
>> "media: imx258: " would be fine.
>>
>> On Wed, Apr 03, 2024 at 09:03:53AM -0600, git@xxxxxxxxxxxx wrote:
>>> From: Luis Garcia <git@xxxxxxxxxxxx>
>>>
>>> It was documented in DT, but not implemented.
>>>
>>> Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
>>> Signed-off-by: Luis Garcia <git@xxxxxxxxxxxx>
>>> ---
>>> drivers/media/i2c/imx258.c | 14 +++++++++++++-
>>> 1 file changed, 13 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
>>> index 163f04f6f954..4c117c4829f1 100644
>>> --- a/drivers/media/i2c/imx258.c
>>> +++ b/drivers/media/i2c/imx258.c
>>> @@ -680,6 +680,7 @@ struct imx258 {
>>> unsigned int csi2_flags;
>>>
>>> struct gpio_desc *powerdown_gpio;
>>> + struct gpio_desc *reset_gpio;
>>>
>>> /*
>>> * Mutex for serialized access:
>>> @@ -1232,7 +1233,11 @@ static int imx258_power_on(struct device *dev)
>>> regulator_bulk_disable(IMX258_NUM_SUPPLIES, imx258->supplies);
>>> }
>>>
>>> - return ret;
>>> + gpiod_set_value_cansleep(imx258->reset_gpio, 0);
>>> +
>>> + usleep_range(400, 500);
>>
>> You could mention this at least in the commit message.
>
> This is T6 in the datasheet: https://megous.com/dl/tmp/92c9223ce877216e.png
>
>
>>> +
>>> + return 0;
>>> }
>>>
>>> static int imx258_power_off(struct device *dev)
>>> @@ -1243,6 +1248,7 @@ static int imx258_power_off(struct device *dev)
>>> clk_disable_unprepare(imx258->clk);
>>> regulator_bulk_disable(IMX258_NUM_SUPPLIES, imx258->supplies);
>>>
>>> + gpiod_set_value_cansleep(imx258->reset_gpio, 1);
>>
>> Same question than on the other GPIO: does this belong here?
>
> No, this should be before the regulator_bulk_disable.
>
> See: https://megous.com/dl/tmp/c96180b23d7ce63a.png
>
> kind regards,
> o.
>
Since I'm supposed to move the reset up should I also
move the power up with it to match your downstream
driver?
>>> gpiod_set_value_cansleep(imx258->powerdown_gpio, 1);
>>>
>>> return 0;
>>> @@ -1554,6 +1560,12 @@ static int imx258_probe(struct i2c_client *client)
>>> if (IS_ERR(imx258->powerdown_gpio))
>>> return PTR_ERR(imx258->powerdown_gpio);
>>>
>>> + /* request optional reset pin */
>>> + imx258->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
>>> + GPIOD_OUT_HIGH);
>>> + if (IS_ERR(imx258->reset_gpio))
>>> + return PTR_ERR(imx258->reset_gpio);
>>> +
>>> /* Initialize subdev */
>>> v4l2_i2c_subdev_init(&imx258->sd, client, &imx258_subdev_ops);
>>>
>>
>> --
>> Regards,
>>
>> Sakari Ailus
