On Wed, Mar 27, 2024 at 05:17:08PM -0600, git@xxxxxxxxxxxx wrote: > From: Luigi311 <git@xxxxxxxxxxxx> > > On some boards powerdown signal needs to be deasserted for this > sensor to be enabled. > > Signed-off-by: Ondrej Jirman <megi@xxxxxx> > --- > .../devicetree/bindings/media/i2c/sony,imx258.yaml | 4 ++++ Bindings should be a separate patch. > drivers/media/i2c/imx258.c | 13 +++++++++++++ > 2 files changed, 17 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml > index c7856de15ba3..0414085bf22f 100644 > --- a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml > @@ -35,6 +35,10 @@ properties: > reg: > maxItems: 1 > > + powerdown-gpios: > + description: |- Don't need '|-' if no formatting. > + Reference to the GPIO connected to the PWDN pin, if any. > + > reset-gpios: > description: |- > Reference to the GPIO connected to the XCLR pin, if any.
