The only IR left still using the old raw decoders on saa7134 is ENCORE FM 5.3. As it is now using the standard rc-core raw decoders, lots of old code can be removed from saa7134. Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 4878f46..72562b8 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -54,11 +54,8 @@ MODULE_PARM_DESC(disable_other_ir, "disable full codes of " #define i2cdprintk(fmt, arg...) if (ir_debug) \ printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg) -/* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */ -static int saa7134_rc5_irq(struct saa7134_dev *dev); -static int saa7134_nec_irq(struct saa7134_dev *dev); +/* Helper function for raw decoding at GPIO16 or GPIO18 */ static int saa7134_raw_decode_irq(struct saa7134_dev *dev); -static void nec_task(unsigned long data); /* -------------------- GPIO generic keycode builder -------------------- */ @@ -397,12 +394,8 @@ void saa7134_input_irq(struct saa7134_dev *dev) if (!ir->running) return; - if (ir->nec_gpio) { - saa7134_nec_irq(dev); - } else if (!ir->polling && !ir->rc5_gpio && !ir->raw_decode) { + if (!ir->polling && !ir->raw_decode) { build_key(dev); - } else if (ir->rc5_gpio) { - saa7134_rc5_irq(dev); } else if (ir->raw_decode) { saa7134_raw_decode_irq(dev); } @@ -448,17 +441,6 @@ static int __saa7134_ir_start(void *priv) (unsigned long)dev); ir->timer.expires = jiffies + HZ; add_timer(&ir->timer); - } else if (ir->rc5_gpio) { - /* set timer_end for code completion */ - init_timer(&ir->timer_end); - ir->timer_end.function = ir_rc5_timer_end; - ir->timer_end.data = (unsigned long)ir; - ir->shift_by = 2; - ir->start = 0x2; - ir->addr = 0x17; - ir->rc5_remote_gap = ir_rc5_remote_gap; - } else if (ir->nec_gpio) { - tasklet_init(&ir->tlet, nec_task, (unsigned long)dev); } else if (ir->raw_decode) { /* set timer_end for code completion */ init_timer(&ir->timer_end); @@ -486,10 +468,6 @@ static void __saa7134_ir_stop(void *priv) return; if (dev->remote->polling) del_timer_sync(&dev->remote->timer); - else if (ir->rc5_gpio) - del_timer_sync(&ir->timer_end); - else if (ir->nec_gpio) - tasklet_kill(&ir->tlet); else if (ir->raw_decode) { del_timer_sync(&ir->timer_end); ir->active = 0; @@ -531,40 +509,6 @@ static void saa7134_ir_close(struct rc_dev *rc) __saa7134_ir_stop(dev); } - -static int saa7134_ir_change_protocol(struct rc_dev *rc, u64 ir_type) -{ - struct saa7134_dev *dev = rc->priv; - struct card_ir *ir = dev->remote; - u32 nec_gpio, rc5_gpio; - - if (ir_type == IR_TYPE_RC5) { - dprintk("Changing protocol to RC5\n"); - nec_gpio = 0; - rc5_gpio = 1; - } else if (ir_type == IR_TYPE_NEC) { - dprintk("Changing protocol to NEC\n"); - nec_gpio = 1; - rc5_gpio = 0; - } else { - dprintk("IR protocol type %ud is not supported\n", - (unsigned)ir_type); - return -EINVAL; - } - - if (ir->running) { - saa7134_ir_stop(dev); - ir->nec_gpio = nec_gpio; - ir->rc5_gpio = rc5_gpio; - saa7134_ir_start(dev); - } else { - ir->nec_gpio = nec_gpio; - ir->rc5_gpio = rc5_gpio; - } - - return 0; -} - int saa7134_input_init1(struct saa7134_dev *dev) { struct card_ir *ir; @@ -574,10 +518,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) u32 mask_keydown = 0; u32 mask_keyup = 0; int polling = 0; - int rc5_gpio = 0; - int nec_gpio = 0; int raw_decode = 0; - int allow_protocol_change = 0; int err; if (dev->has_remote != SAA7134_REMOTE_GPIO) @@ -830,8 +771,6 @@ int saa7134_input_init1(struct saa7134_dev *dev) ir->mask_keydown = mask_keydown; ir->mask_keyup = mask_keyup; ir->polling = polling; - ir->rc5_gpio = rc5_gpio; - ir->nec_gpio = nec_gpio; ir->raw_decode = raw_decode; /* init input device */ @@ -846,11 +785,6 @@ int saa7134_input_init1(struct saa7134_dev *dev) if (raw_decode) rc->driver_type = RC_DRIVER_IR_RAW; - if (!raw_decode && allow_protocol_change) { - rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC; - rc->change_protocol = saa7134_ir_change_protocol; - } - rc->input_name = ir->name; rc->input_phys = ir->phys; rc->input_id.bustype = BUS_PCI; @@ -1024,152 +958,3 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev) return 1; } - -static int saa7134_rc5_irq(struct saa7134_dev *dev) -{ - struct card_ir *ir = dev->remote; - struct timeval tv; - u32 gap; - unsigned long current_jiffies, timeout; - - /* get time of bit */ - current_jiffies = jiffies; - do_gettimeofday(&tv); - - /* avoid overflow with gap >1s */ - if (tv.tv_sec - ir->base_time.tv_sec > 1) { - gap = 200000; - } else { - gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) + - tv.tv_usec - ir->base_time.tv_usec; - } - - /* active code => add bit */ - if (ir->active) { - /* only if in the code (otherwise spurious IRQ or timer - late) */ - if (ir->last_bit < 28) { - ir->last_bit = (gap - ir_rc5_remote_gap / 2) / - ir_rc5_remote_gap; - ir->code |= 1 << ir->last_bit; - } - /* starting new code */ - } else { - ir->active = 1; - ir->code = 0; - ir->base_time = tv; - ir->last_bit = 0; - - timeout = current_jiffies + (500 + 30 * HZ) / 1000; - mod_timer(&ir->timer_end, timeout); - } - - return 1; -} - -static void nec_task(unsigned long data) -{ - struct saa7134_dev *dev = (struct saa7134_dev *) data; - struct card_ir *ir; - struct timeval tv; - int count, pulse, oldpulse, gap; - u32 ircode = 0, not_code = 0; - int ngap = 0; - - if (!data) { - printk(KERN_ERR "saa713x/ir: Can't recover dev struct\n"); - /* GPIO will be kept disabled */ - return; - } - - ir = dev->remote; - - /* rising SAA7134_GPIO_GPRESCAN reads the status */ - saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - - oldpulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown; - pulse = oldpulse; - - do_gettimeofday(&tv); - ir->base_time = tv; - - /* Decode NEC pulsecode. This code can take up to 76.5 ms to run. - Unfortunately, using IRQ to decode pulse didn't work, since it uses - a pulse train of 38KHz. This means one pulse on each 52 us - */ - do { - /* Wait until the end of pulse/space or 5 ms */ - for (count = 0; count < 500; count++) { - udelay(10); - /* rising SAA7134_GPIO_GPRESCAN reads the status */ - saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); - pulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) - & ir->mask_keydown; - if (pulse != oldpulse) - break; - } - - do_gettimeofday(&tv); - gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) + - tv.tv_usec - ir->base_time.tv_usec; - - if (!pulse) { - /* Bit 0 has 560 us, while bit 1 has 1120 us. - Do something only if bit == 1 - */ - if (ngap && (gap > 560 + 280)) { - unsigned int shift = ngap - 1; - - /* Address first, then command */ - if (shift < 8) { - shift += 8; - ircode |= 1 << shift; - } else if (shift < 16) { - not_code |= 1 << shift; - } else if (shift < 24) { - shift -= 16; - ircode |= 1 << shift; - } else { - shift -= 24; - not_code |= 1 << shift; - } - } - ngap++; - } - - - ir->base_time = tv; - - /* TIMEOUT - Long pulse */ - if (gap >= 5000) - break; - oldpulse = pulse; - } while (ngap < 32); - - if (ngap == 32) { - /* FIXME: should check if not_code == ~ircode */ - ir->code = ir_extract_bits(ircode, ir->mask_keycode); - - dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n", - ir->code, ircode, not_code); - - ir_keydown(ir->dev, ir->code, 0); - } else { - dprintk("Repeat last key\n"); - ir_repeat(ir->dev); - } - - saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P); -} - -static int saa7134_nec_irq(struct saa7134_dev *dev) -{ - struct card_ir *ir = dev->remote; - - saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P); - tasklet_schedule(&ir->tlet); - - return 1; -} diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 4e37b8b..a6c726f 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -37,7 +37,7 @@ #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> #include <media/tuner.h> -#include <media/ir-common.h> +#include <media/ir-core.h> #include <media/ir-kbd-i2c.h> #include <media/videobuf-dma-sg.h> #include <sound/core.h> -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html